Craftcloud offers a wide range of materials, including plastics, metals, and a variety of finishes and colors for each.
188 results
Nylon PA12 is one of the most widely used SLS materials. It is a tough, versatile plastic with low moisture absorption and good chemical resistance for durable functional parts.
PETG offers good impact resistance and strong layer adhesion, plus reliable chemical and moisture resistance. It is a good choice for everyday functional parts.
316L Stainless Steel is a highly durable alloy known for its corrosion resistance and versatility in both industrial and aesthetic applications.
AlSi10Mg is a lightweight cast-type aluminum alloy with high as-built strength and good thermal and electrical conductivity, suited to functional metal parts, with strength and ductility depending on heat treatment.
ABS is a durable, impact-resistant plastic with good heat tolerance, and is well suited to functional parts and prototypes that need to handle everyday stress.
Developed by HP, MJF Nylon is a widely used material for strong and detailed end-use parts and prototypes.
PLA is a low-cost, rigid plastic with excellent dimensional accuracy, and is a good choice for prototypes and functional parts that do not require strength or heat resistance.
ASA is a durable plastic with outstanding UV and weather resistance, which makes it the top choice for parts exposed to prolonged sunlight and outdoor conditions.
Tough resin is an impact-modified photopolymer that trades some of standard resin's stiffness for significantly better elongation and impact resistance. This makes it better suited to functional parts that need to withstand stress without cracking.
The strongest 3D printable material, titanium offers good dimensional accuracy and fine details.
PLA+ and Tough PLA offer enhanced strength and durability compared to regular PLA, which makes them ideal for functional prototypes and mechanical parts.
Aluminum Alloy 6061 offers excellent strength-to-weight performance, good corrosion resistance, and reliable dimensional stability. It is ideal for lightweight structural parts, prototypes, and functional components requiring durability and machinability.
Standard resin is a general-purpose photopolymer optimized for fine detail and a smooth surface finish. It offers good rigidity but limited impact resistance, making it suitable for visual models and detailed prototypes, rather than functional parts.
TPU is a versatile elastomer family that ranges from soft, highly stretchable rubber-like grades to firmer, semi-rigid formulations.
17-4 PH Stainless Steel is a martensitic precipitation-hardening steel with very high strength and hardness after heat treatment and corrosion resistance similar to 304, though it is magnetic and less corrosion resistant than 316.
High-detail resin is a photopolymer formulated to minimize shrinkage and maximize edge sharpness and surface resolution, capturing extremely fine features like engraved text and fabric texture that other materials can't reproduce as reliably.
Polycarbonate (PC) is an engineering-grade plastic with the highest heat resistance and impact strength of common FDM materials, and it is ideal for demanding functional parts and prototypes.
MJF glass-filled nylon PA12 is a stiff PA12 with the same properties in every direction and higher heat deflection under load than standard nylon. It is a good choice for rigid functional parts.
Carbon fiber PETG is a reinforced composite that adds significant stiffness and dimensional stability to standard PETG, trading some impact resistance for rigidity. It is ideal for parts that need to hold their shape under load.
Translucent resin allows light to pass through with a soft, diffused effect rather than true see-through clarity. This makes it the practical choice when frosted light diffusion is the goal rather than optical clarity.
Maraging steel is a class of ultra-low-carbon, ultra-high-strength steels hardened by aging, reaching roughly 1,400–2,400 MPa depending on grade, suited to tooling inserts, molds, and high-strength parts.
Transparent resin is a clear photopolymer that is capable of true glass-like optical clarity. It's an ideal choice for parts where you need to see clearly through the material.
Carbon fiber ASA is a reinforced composite that adds stiffness and dimensional stability to standard ASA while retaining its signature UV and weather resistance. It is a strong choice for structural outdoor parts.
SLS flexible TPU is a rubber-like, tear-resistant material with very good shock absorption and abrasion resistance. It's suitable for flexible functional prototypes and wear-prone parts.
Carbon fiber PPA is a high-performance composite that pushes heat resistance and dimensional stability well beyond standard carbon fiber nylon. It is suited to demanding engineering applications exposed to elevated temperatures.
Carbon fiber nylon is a reinforced composite that significantly increases stiffness and heat resistance over standard nylon, trading away some of nylon's signature impact resistance and flexibility in the process.
Elastic resin (Shore 50A–65A) is a soft, rubber-like photopolymer with high elongation and good rebound, ideal for prototyping silicone-like parts that need to stretch, compress, and flex repeatedly.
Brass is a copper-zinc-tin alloy (80% copper, 15% zinc, 5% tin) with a warm gold-like color and fine detail, suited to jewelry, miniatures, and prototypes, though it tarnishes over time.
High-detail 316L Stainless Steel is 316L built with finer layers, which allows for thinner walls (about 0.5 mm) and smaller features than standard 316L, with similar strength and high ductility.
Nylon-like resin is an impact-modified photopolymer formulated to mimic nylon's flexibility and toughness, offering meaningfully better durability than standard resin. However, it doesn't fully match the toughness of actual printed nylon.
Flexible resin (Shore 80A) is a soft-touch, rubber-like photopolymer similar in firmness to a shoe heel. It combines flexibility with more rigidity and detail retention than elastic resin.
Wood-filled PLA blends real wood fiber with PLA to create a filament that looks, feels, and can be finished like natural wood, and it is prized for its appearance rather than mechanical strength.
Sterling silver is the perfect material for jewelry and unique metal art pieces.
FDM nylon is a tough, wear-resistant engineering plastic known for high impact resistance, low friction, and the ability to flex repeatedly without cracking, all of which make it ideal for functional, moving parts.
Carbon Fiber PLA is a reinforced composite that significantly increases stiffness and dimensional stability over standard PLA, though this comes at the cost of increased brittleness.
PCTG is a tougher, clearer alternative to PETG. It offers notably better impact resistance and moisture resistance while it retains PETG's ease of use and chemical resistance.
Inconel 718 is a precipitation-hardening nickel-chromium superalloy with high strength, creep resistance, and fatigue strength at temperatures up to about 700 °C.
Multicolor FDM prints made with two or more PLA filaments offer vibrant, visually striking results. Ideal for decorative or functional parts, these prints combine strong layer adhesion, smooth surfaces, and precise color transitions.
HP® 3D HR PA 12 S delivers exceptional surface quality and precision right out of the printer. The material is perfect for functional prototypes and high-end consumer goods.
PC-ABS is a polymer blend that combines polycarbonate's heat resistance and toughness with ABS's easier processability and dimensional stability, striking a middle ground between the two.
Glass fiber nylon (PA-GF) adds stiffness, heat resistance, and dimensional stability to nylon at a lower cost than carbon fiber nylon, while retaining significantly better impact resistance and toughness.
Accura® ClearVue is a clear, transparent resin with low moisture absorption that simulates the appearance of polycarbonate and ABS, suited to lens and headlamp models, fluid-flow visualization, and transparent assemblies.
FDM TPE is a softer, more rubber-like flexible material than TPU. It offers excellent comfort and stretch for grip and cushioning applications, though with less abrasion, chemical, and heat resistance.
Multi Jet Fusion PA11, produced by HP, is a bio-derived powder with exceptionally high toughness. This material offers high ductility and impact strength for all applications, especially functional parts.
Plated brass is lost wax cast brass with a tin-rhodium underplate and a thin gold or rhodium plating, nickel-free and suited to occasional-wear jewelry, though the plating wears through over time.
Somos Taurus has high thermal and mechanical properties along with superior strength, high accuracy, and exceptional surface finish.
Elastic silicone rubber (AR-G1) is a silicone-like rubber offered in a softer grade (AR-G1L, Shore A35) and a firmer grade (AR-G1H, Shore A65), suited to flexible design models and soft prototypes.
Carbon fiber polycarbonate (PC-CF) adds significant stiffness, heat resistance, and dimensional stability to standard PC.
PolyJet full-color is a rigid, UV-cured photopolymer that blends into thousands of colors for realistic visual models, with fine detail, though it is brittle and softens at about 45–50 °C.
Nylon PA11 is a bio-based nylon, made from castor oil, with high ductility and impact resistance. It is suitable for durable functional parts that need to flex or absorb impact.
Carbon fiber PPS is a high-performance composite that offers metal-matching stiffness, exceptional chemical resistance, and inherent flame retardancy, though it's more brittle than tougher engineering plastics like nylon or polycarbonate.
High-temperature resin offers a notably higher heat deflection temperature than standard resin. This makes it a strong choice for heat-resistant mounts, fixtures, and housings that need to hold their shape under sustained heat.
Recycled rPETG reprocesses post-consumer or post-industrial PETG waste into new filament. It offers a sustainable alternative to virgin PETG with comparable strength, toughness, and chemical resistance.
Somos Evolve is the perfect material for strong, highly detailed functional prototypes and parts that need to withstand continuous usage.
Flame retardant polycarbonate (PC-FR) combines polycarbonate's strength and heat resistance with a UL94 V-0 fire rating. This makes it a strong choice for electrical enclosures and components near heat sources.
FDM PEEK is a premium engineering thermoplastic that combines exceptional heat resistance, strength, and chemical resistance with genuine biocompatibility. It is used where metal replacement or medical-grade performance is required.
Silicone resin produces soft, flexible parts with rubber-like elasticity and durability. It offers moderate rebound, fine detail resolution, and reliable performance for seals, gaskets, and functional flexible prototypes.
SLS polypropylene is a lightweight, ductile, chemically resistant plastic that tolerates repeated bending. It is suited to durable functional parts, though it softens at around 60 °C under load.
PETG-ESD is a PETG modified with carbon nanotubes so static charge drains away gradually, suited to electronics enclosures, jigs, and fixtures.
Bronze (90% copper, 10% tin) is a harder, more tarnish-resistant alternative to brass with a warm reddish tone, suited to antique-style jewelry, miniatures, and decorative parts.
Polymethyl Methacrylate (PMMA), commonly known as acrylic or plexiglass, offers strong optical clarity and excellent UV resistance, though it's notably more brittle and less impact-resistant than materials like ABS or polycarbonate.
BioMed resin is a biocompatible photopolymer certified under ISO 10993 for medical device applications, with specific contact type and duration varying by exact formulation.
Accura® Xtreme is a tough resin with good elongation that simulates polypropylene and ABS for snap-fits, assemblies, and functional prototypes, though it deflects under load at only about 54–62 °C.
SLS food safe nylon PA12 is a durable, chemical-resistant nylon made from a powder grade certified for food contact, suited to tools and components used in food processing.
Rigid resin is a glass-reinforced photopolymer that offers a high level of detail, stiffness, and deformation resistance.
ABS-ESD is an ABS modified with a conductive additive so static charge drains away gradually, suited to electronics enclosures, jigs, and fixtures, though it is less ductile and impact-resistant than standard ABS.
Flame retardant PETG is a halogen-free PETG designed to self-extinguish (to UL 94 V-0 criteria), suited to electronics enclosures and machine parts, though weaker than regular PETG and with a heat deflection of only about 60 °C.
GreenTEC Pro Carbon is a biopolymer made from renewable resources combined with 10% carbon fiber. The material offers high rigidity, very good mechanical properties and an increased temperature resistance.
Metal binder jetted 316L Stainless Steel is sintered to 96–99% density with ductility like conventional 316L, but its yield strength is well below laser-melted 316L.
Recycled rPLA reprocesses post-consumer or post-industrial PLA waste into new filament. It offers a more sustainable alternative to virgin PLA with generally similar, though somewhat more variable, mechanical properties.
Castable resin is a synthetic photopolymer engineered to burn out cleanly with minimal ash during investment casting. It offers a more affordable alternative to wax-based casting patterns.
Glass fiber ASA is ASA reinforced with chopped glass fiber, giving higher stiffness and about 10 °C more heat deflection than standard ASA while keeping its UV and weather resistance, though it is less ductile.
Polypropylene is a versatile and durable material, highly suitable for compliant and functional parts. The FDM technology provides a cheaper alternative to SLS or MJF printed parts.
ULTEM 1010 offer the highest tensile strength and the highest chemical and thermal resistance of any FDM thermoplastic.
SLS glass-filled nylon PA12 is a stiff, wear-resistant PA12 with higher heat deflection under load than standard nylon, suited to rigid functional parts, though it is less ductile.
Accura® 25 is a white, polypropylene-like resin (Shore 80D) with good elongation and shape retention, used to simulate and replace CNC-machined polypropylene parts such as snap-fits and functional assemblies.
Carbon fiber ABS is ABS reinforced with chopped carbon fiber (typically 10–15%), giving much higher stiffness and slightly better heat resistance than standard ABS, though it is less ductile.
Durable resin is a polypropylene-like photopolymer with low modulus, high elongation, and the highest impact strength of common resin options. It is ideal for pliable parts like living hinges and low-friction moving components.
GreenTec Pro is a high performance biodegradable material made from 100% natural resources. With a high heat resistance (up to 160 °C) and mechanical stress resistance, the material is ideal for demanding applications.
Copper is a base metal with very high electrical and thermal conductivity, good ductility, and naturally antimicrobial surfaces, suited to heat-management parts, coils, and electrical components.
Figure 4® HI TEMP 300-AMB is a rigid, translucent amber resin with a heat deflection temperature above 300 °C even under higher load, suited to testing high-temperature parts, molds, and flow visualization, though it is brittle.
Castable wax is a nearly pure wax material used to create investment casting patterns. It offers the cleanest, most traditional burnout behavior of any castable option.
Metal-filled PLA is PLA loaded with fine metal powder (about 20–80% by weight), giving heavier, metal-looking parts that can be polished, mainly for decorative pieces, though it is brittle.
Flame retardant resin is a photopolymer that self-extinguishes rather than sustaining flame, which makes it a strong choice for electronics and industrial parts near heat or ignition sources.
Somos GP Plus 14122 is ideal for functional prototypes, concept models, and low volume production parts.
HIPS is polystyrene toughened with polybutadiene rubber, a lightweight, easily painted plastic with moderate impact resistance, similar to ABS but less tough.
MJF flexible TPU is a rubber-like, tear-resistant material with high rebound and good abrasion resistance that's suited to flexible functional prototypes and wear-prone parts.
PETG-HT is an enhanced version of PETG, specifically designed to withstand high temperatures and exhibit excellent mechanical properties.
ULTEM 9085 is a high-performance thermoplastic with excellent chemical resistance and an extreme level of flame retardancy.
Carbon-reinforced PEEK is stiffer and somewhat stronger than normal PEEK, with a much higher heat deflection temperature under load, though it is far less ductile.
Nylon PA6 is a stiff, heat-resistant nylon that is stronger than PA12 when dry. It is sutiable for rigid functional parts, though it absorbs more moisture and is less flexible.
Markforged® Onyx is a nylon filled with chopped micro carbon fiber, about 1.4 times stronger and stiffer than ABS, with a heat deflection of 145 °C at light load, suited to functional prototypes and end-use parts.
Elastomeric polyurethane (EPU) is a rubber-like polyurethane (Shore 68A) with good elastic recovery, tear resistance, and energy damping, suited to gaskets, seals, vibration isolation, and impact absorption.
Ceramic resin is a high-resolution photopolymer that produces rigid parts with excellent stiffness, heat resistance, and dimensional accuracy.
Somos PerFORM is the material of choice for applications that require strong, stiff, temperature-resistant composite parts.
SLS PEEK is a high-performance thermoplastic that offers high tensile strength, good heat resistance, and broad chemical resistance in a lightweight part, if with low ductility.
Gold is a precious metal, typically offered as solid 14K or 18K in yellow, red, and white tones, used for jewelry and unique art pieces.
iglidur® I180-PF by igus is a material with high wear resistance, especially designed for moving parts.
PVB filament is a semi-rigid material that can be smoothed to a glossy, layer-free finish, with low warping, suited to display models and visual prototypes
Conductive PLA is a carbon-filled PLA that conducts electricity well enough for low-voltage, low-current parts such as touch sensors and simple circuits, with a volume resistivity of about 30 Ω·cm along the layers.
iglidur® I150-PF by igus features a high abrasion resistance at low speeds combined with good mechanical properties.
Recycled rASA reprocesses post-consumer or post-industrial ASA waste into new filament. It offers a more sustainable alternative to virgin ASA, though it has a more limited recyclability than PLA, ABS, or PETG.
PA 2200 is a widely used white nylon 12 grade with a balanced profile of strength, stiffness, and chemical resistance. It is a standard for functional SLS prototypes and rugged, end-use industrial components.
PHA (Polyhydroxyalkanoate) filament is a biodegradable type of plastic used in 3D printing, made through the fermentation of plant sugars by bacteria. It a great choice for applications that require biodegradability.
SLS PA6 carbon fiber is a stiff, dimensionally stable nylon composite with higher heat resistance than unfilled PA6. It is suitable for rigid structural parts, though it has low ductility.
SLS nylon PA12 carbon fiber is a 23% carbon-fiber-filled nylon 12, suited to rigid parts and tooling.
TrueSil is a 3D printable pure silicone offering high flexibility, biocompatibility, and durability. Ideal for seals, wearables, and medical parts, it resists heat, UV, and repeated deformation.
PPSU is a heat- and chemical-resistant material suited for automotive, aerospace, and plumbing applications.
MJF polypropylene is a lightweight, chemically resistant plastic with consistent properties in every direction. It is suited to durable functional parts and fluid-handling components, though it softens at around 60 °C under load.
Lightweight PLA (LW-PLA) is a specialized 3D printing filament that expands up to three times its volume for lighter prints without losing the strength of standard PLA.
Multicolor FDM prints using ASA combine vibrant color separation with exceptional UV, heat, and weather resistance. Ideal for outdoor signage, automotive parts, and durable prototypes needing both strength and visual impact.
PP-like resin is a flexible, impact-resistant photopolymer designed to simulate polypropylene. It offers high elongation, good durability, and strong resistance to cracking, making it ideal for living hinges, clips, and functional prototypes.
Glass fiber PEEK is PEEK reinforced with glass fiber for better creep resistance, stiffness, and dimensional stability under sustained load at high temperature, with PEEK’s broad chemical resistance, though it is less suited to wear applications.
Flame-retardant PA 12 for MJF, offering durability, dimensional stability, and fire compliance for functional and safety-critical parts.
Formlabs's surgical guide resin is a CE certified, biocompatible material that meets Class I requirements.
Castable wax resin blends real wax into a photopolymer base, combining standard resin printer compatibility with burnout behavior closer to pure wax than standard castable resin achieves.
PC-like resin is a highly rigid photopolymer that simulates polycarbonate's stiffness and heat resistance, though it's more brittle than ABS-like resin, which makes it better suited to precision, load-bearing parts than parts needing to absorb impact.
SLS PA11 carbon fiber is a stiff, lightweight nylon composite with much higher stiffness and heat resistance under load than standard PA11. It is best used for rigid parts, though with less ductility.
ABS Kevlar is ABS reinforced with aramid (Kevlar) fibers for better abrasion resistance and dimensional stability, with strength, stiffness, and heat resistance close to standard ABS, suited to wear-prone parts and fixtures.
FDM TPU-ESD is an engineering-grade thermoplastic chosen for its balance of flexibility and protection against electrostatic discharge.
A great material for striking visual models.
PA12 CCF is a is a co-extruded material consisting of nylon PA12 with a composite of nylon and continuous carbon fibers. This unique combination gives the finished part a smooth surface along with high strength, toughness, and durability.
Nylon PA66 is a strong, stiff nylon with good chemical resistance and heat tolerance, well above PA12 in strength and stiffness, though it absorbs far more moisture.
SLS glass-filled nylon PA6 is a very stiff nylon composite with high heat deflection (about 200 °C under load). It's a good choice for rigid, heat-exposed functional parts, though the material is not flexible and still absorbs moisture.
Figure 4® RUBBER-BLK 10 is a hard rubber-like black resin (Shore 59D/97A) with high tear strength and slow rebound, suited to grips, handles, bumpers, strain relief, and overmolds, though it is much firmer than soft rubber.
Alumide is an aluminum-filled nylon 12 with a metallic gray look, high stiffness, and heat deflection around 144 °C under load, suited to rigid parts, jigs, and models, though it is less flexible than standard nylon.
Glass-filled polypropylene is a tough material with high strength that is also resistant to high temperatures. It is suitable for functional verification of product prototypes.
Anti-static resin (ESD) produces rigid, high-detail parts with controlled surface resistivity to prevent static buildup. It offers dimensional accuracy, a smooth matte finish, and electrostatic discharge protection for sensitive electronic applications.
PVA is a water-soluble thermoplastic used primarily as support material in FDM printing. It dissolves cleanly in water, enabling complex geometries, internal channels, and delicate details that would be difficult or impossible with breakaway support.
Glass fiber ULTEM 1010 is ULTEM 1010 polyetherimide reinforced with glass fiber for added stiffness and dimensional stability, built on a resin with a glass transition of about 215 °C.
PET 3D prints offer a strong balance of toughness, chemical resistance, and dimensional stability. The material produces durable parts with good layer adhesion and a semi-gloss surface finish.
Recycled rABS reprocesses post-consumer or post-industrial ABS waste into new filament. It offers a sustainable alternative to virgin ABS with mechanical properties that hold up well through recycling.
SLS PK is a tough, ductile polyketone with excellent chemical and fuel resistance, very low moisture absorption, and low friction and wear, suited to functional parts exposed to fluids, though it is somewhat less stiff than PA12.
Carbon fiber PET is a PET filament reinforced with chopped carbon fiber, offering high stiffness, low moisture absorption, and higher heat deflection than PETG, though it is brittle and weaker across the layers.
VisiJet® M2R-TN parts have a durable, tan-colored finish with excellent impact resistance and dimensional accuracy. Ideal for functional prototypes and mechanical components, they offer high performance straight from the printer.
VisiJet® Armor M2G-CL offers high strength, impact resistance, and precise dimensional accuracy. The material’s light gray color and durability make it ideal for functional prototypes and end-use parts that require high mechanical performance.
SLS PEKK-CF is a carbon-fiber-reinforced PEKK that is very stiff and holds its shape under load up to roughly 200 °C. It is a good option for rigid high-temperature parts, though it is brittle and weaker across the layers.
HP® 3D HR PA 12 W is a high-reusability, white nylon (polyamide 12) designed for durable, functional 3D printed parts with excellent chemical and mechanical resistance.
PEKK filament is a high-performance thermoplastic from the PAEK family, known for excellent thermal and chemical resistance, and mechanical strength. Ideal for aerospace, automotive, and high-tech industries, it excels in demanding environments.
LithaCon 3Y 210 is a zirconia stabilized with 3 mol% yttria, with about 99.4% relative density, a four-point bending strength of about 1,000 MPa, and high fracture toughness, abrasion resistance, and thermal shock resistance.
Carbon-reinforced ULTEM 9085 is a stiffer, stronger version of ULTEM 9085, though it is less ductile and weaker across the layers.
Titanium Grade 23 (ELI) offers exceptional biocompatibility, high strength-to-weight ratio, and excellent corrosion resistance.
Inkbit® Titan Tough Epoxy is a type of high-performance material known for its exceptional strength, durability, and resistance to harsh environmental conditions.
420/BR is a bronze-infused stainless steel that offers good strength and wear resistance for decorative and industrial parts, but less corrosion resistance than solid stainless steel.
Platinum is a dense, silvery-white precious metal that resists tarnish and corrosion and is hypoallergenic, typically supplied as 950 platinum for fine jewelry.
Food safe 316L Stainless Steel is a low-carbon austenitic stainless steel with excellent corrosion resistance and higher yield strength than conventionally made 316L, offered with food-contact documentation, suited to food-processing parts.
HP 3D HR TPA is a durable, flexible elastomer for MJF printing, perfect for functional parts like gaskets, seals, and wearables that require repeated bending or impact resistance.
Temperature-based color-changing PLA is ideal for novelty prints.
TEPU 50A by Inkbit® is a soft, rubber-like polyurethane ideal for flexible parts that need durability and precision. With a Shore hardness of 50A, it’s perfect for seals, cushioning, wearables, and soft robotics.
PLA-ESD is a PLA modified with a conductive additive so static charge drains away gradually, suited to electronics jigs and fixtures.
Carbon-reinforced PEKK is a stiffer version of PEKK with modestly higher strength, though it is less ductile and weaker across the layers.
Nickel-titanium (NiTi, nitinol) is a shape memory alloy that recovers its shape after deformation, with superelastic recovery of about 3–6% strain in printed parts, though its behavior depends on precise nickel content and heat treatment.
ithaLox HP 500 is a high-purity (99.99%) alumina ceramic with 99.4% relative density, a four-point bending strength of 430 MPa, and a smooth surface.
PMMA is a porous acrylic material with low strength, used mainly for investment casting patterns and visual models.
Multicolor FDM prints using PETG combine vivid color separation with the material's toughness, flexibility, and chemical resistance. It is ideal for functional enclosures and durable prototypes that need both visual impact and everyday resilience.
As-printed multicolor FDM ABS has a ribbed, layered texture. Color regions are generally clean-edged, with minor bleed at color-change points. ABS has a matte look, unlike glossier PETG, and responds well to acetone vapor smoothing.
PC/PTFE is an advanced polycarbonate composite enriched with PTFE (Teflon). It offers high mechanical strength and exceptional abrasion resistance with low friction, making it ideal for industrial parts.
PEBA is a high-performance flexible material that combines the strength of nylon with the elasticity of rubber. It is characterized by its ultra-lightweight structure and a "high rebound" effect, delivering up to 85% energy return for dynamic parts.
SLS PEBA is a lightweight, flexible polyether block amide elastomer with high energy return and rubber-like fatigue resistance that stays flexible down to about -40 °C. It's suited to dampers and cushioning parts.
A soft, flexible polyurethane with Shore A 30 hardness, Inkbit® TEPU 30 delivers smooth, durable, and highly detailed parts ideal for gaskets, seals, and cushioning components.
LithaBone TCP 300 is a beta-tricalcium phosphate (β-TCP) ceramic at 98% relative density that the body resorbs and replaces with new bone, suited to bone substitute implants and scaffolds with defined pore geometries.
SLS food safe metal detectable nylon PA12 is a blue, food-contact-certified PA12 that contains metal particles, so stray fragments can be caught by metal detectors and X-ray inspection on food production lines.
Food safe aluminum (AlSi10Mg) is a lightweight alloy with good thermal conductivity and high as-built strength, supplied with a food-contact coating, suited to food-processing parts that avoid acidic or salty foods.
Food safe titanium (Ti-6Al-4V) is a lightweight, non-magnetic, corrosion-resistant alloy with high strength, offered with food-contact documentation, suited to food-processing parts that need strength at moderate temperatures.
High-detail 17-4 PH Stainless Steel is 17-4 PH built with finer layers, which allows for thinner walls and smaller features than the standard grade.
SLS flexible TPE is a rubber-like elastomer, available from very soft to firm, that withstands repeated bending and vibration, suited to gaskets, dampers, and soft functional parts, though it is weak and softens at modest temperatures.
High-detail bronze (90% copper, 10% tin) is a harder, more tarnish-resistant alternative to brass with a warm reddish tone, suited to jewelry and miniatures with very small sections.
iglidur® I190-PF is a material that offers high-strength and wear-resistance for low-friction, dry-running parts. It is deal for bushings, gliding elements, and motion components in automation and machinery.
Flame retardant SLS nylon PA12 is PA12 formulated to self-extinguish, with fire ratings such as UL 94 V-0 that depend on wall thickness, suited to electrical and transport components, though it is less ductile than standard PA12.
Markforged® copper is a 99.8% pure copper with 84% IACS electrical conductivity and 350 W/m·K thermal conductivity. It is soft and ductile, and is suited to heat sinks, bus bars, and induction coils.
Markforged® Inconel 625 is a nickel-chromium superalloy with high corrosion resistance and strength at high temperatures, suited to high-temperature fixtures and corrosion-resistant fittings.
PVC filament is renowned for its exceptional durability and resistance to moisture. Its versatility and robustness make it a favored option for creating functional prototypes, outdoor signage, and parts that require water-resistant properties.
MoldJet® 316L Stainless Steel is a 316L from a sinter-based process that reaches about 99.9% relative density, with near-isotropic tensile strength and high ductility, suited to corrosion-resistant parts.
LithaBone HA 400 is a hydroxyapatite ceramic (85% relative density, 15% porosity) that is absorbed more slowly than tricalcium phosphate, giving the body more time to heal, made from HA powder certified to ASTM F1185-03.
Markforged® H13 is a hot-work tool steel that is suited to tool bodies, brazing fixtures, and mold inserts, though about 94.5% dense and less ductile than wrought H13.
Ultrafuse 316L produces sintered 316L stainless steel parts with high ductility and corrosion resistance, similar in strength to annealed wrought 316L, though with lower yield strength than laser-melted 316L.
Figure 4® High Temp 150 °C FR Black is a rigid, halogen-free, flame-retardant black resin rated UL 94 V-0 at 2 and 3 mm, with a heat deflection of 150 °C under light load, suited to electrical housings and transport parts, though brittle.
BASF® Ultracur3D® RG 3280 is a ceramic-filled resin designed for functional 3D printing. It offers high stiffness, excellent heat resistance, and a smooth white finish, which makes it ideal for durable prototypes and demanding end-use parts.
Ultracur3D® EL 60 is a flexible, clear resin with excellent elasticity, tear resistance, and durability. It combines rubber-like performance with high accuracy, making it suitable for functional prototypes and industrial parts.
SLS PA11 ESD is a bio-based, castor-oil nylon with much lower surface resistance than standard PA11. It dissipates static charge from tools, jigs, and housings used around sensitive electronics.
Rigid polyurethane is a stiff polyurethane resin comparable to ABS, suited to consumer, automotive, and industrial parts.
E-Mould is a strong, high detail material, which can be used to print molds used for injection molding of various plastics.
PA12 CBF is a co-extruded material consisting of nylon PA12 with a composite of nylon and continuous basalt fibers. This unique combination gives the finished part a smooth surface along with strength, toughness, and durability.
PETG CCF is a clear PETG shell with a PETG and continuous carbon fiber composite inside. This unique combination results in a part with a much higher tensile strength than PETG alone with a smooth translucent finish.
VisiJet® M2S-HT90 is a strong and rigid material for applications requiring temperature resistance and/or rigidity, ideal for rapid tooling, under the hood parts, enclosures and housings
Ultrafuse 17-4 PH produces sintered 17-4 PH stainless steel parts that are strong, magnetic, and corrosion resistant, and can be heat treated to higher strength, though with lower ductility than other metal 3D printing processes.
SLS glass-filled polypropylene is a stiffer, stronger polypropylene that resists heat much better under load (around 130 °C) than unfilled PP, with good chemical resistance, although it is denser and less ductile.
Scalmalloy® is a high-strength aluminum-magnesium-scandium alloy, suited to lightweight brackets, thermal management components, and ducts.