Material
Figure 4® RUBBER-BLK 10
Figure 4® RUBBER-BLK 10 is a hard rubber-like black resin (Shore 59D/97A) with high tear strength and slow rebound, suited to grips, handles, bumpers, strain relief, and overmolds, though it is much firmer than soft rubber.
Manufacturing processes
About
Figure 4® RUBBER-BLK 10 is a hard, rubber-like black resin (Shore hardness 59D, 97A) with high tear strength, tensile strength of about 19–28 MPa, and about 75–80% elongation. Its rebound is slow rather than bouncy, which suits touch applications, and it is rated UL 94 HB and tested for long-term indoor and outdoor stability.
It is much firmer than soft rubber, so it isn’t a substitute for soft seals or gaskets.
Figure 4® RUBBER-BLK 10 is well suited to grips, handles, bumpers, strain-relief parts, couplings, and overmolds.
Technical Details
- Accuracy
- ±0.2% (lower limit of ±0.2 mm)
- Density
- 1.17 g/cm³
- Min. wall thickness
- 0.6 mm
Technical Properties
- Tensile strength
- 21 MPa
- Tensile modulus
- 540 MPa
- Tensile elongation
- 80%
- Default layer height
- 0.03 mm
- Default infill
- 100%
- Embossing
- min. 0.5 mm
- Engraving
- min. 0.5 mm
- Interlocking parts
- Yes
- Warping risk
- Low
- Maximum printing dimensions
- 190 × 120 × 298 mm