Material
ABS-ESD
ABS-ESD is an ABS modified with a conductive additive so static charge drains away gradually, suited to electronics enclosures, jigs, and fixtures, though it is less ductile and impact-resistant than standard ABS.
Manufacturing processes
FDM
About
ABS-ESD is ABS with a conductive additive, so static charge drains away gradually instead of building up. Stiffness and tensile strength are broadly similar to standard ABS, but ductility and impact strength drop, and ESD performance can vary with part geometry.
ABS-ESD is commonly used for electronics enclosures, jigs and fixtures, and handling tools around static-sensitive components.
Technical Details
- Accuracy
- ±0.3% (lower limit of ±0.2 mm)
- Density
- 1.09 g/cm³
- Min. wall thickness
- 1 mm
Technical Properties
- Tensile strength
- 32 - 45 MPa
- Tensile modulus
- 1618 - 2030 MPa
- Tensile elongation
- 4.8 - 20%
- Flexural strength
- 60 - 76 MPa
- Flexural modulus
- 1800 - 2070 MPa
- HDT (0.45 MPa)
- 81 - 95°C
- HDT (1.8 MPa)
- 80 - 95°C
- Default layer height
- 0.2 mm
- Default infill
- 20%
- Embossing
- min. 0.4 mm
- Engraving
- min. 0.4 mm
- Interlocking parts
- Yes
- Warping risk
- Low
- Maximum printing dimensions
- 900 × 600 × 900 mm