Material
Flame Retardant Resin
Flame retardant resin is a photopolymer that self-extinguishes rather than sustaining flame, which makes it a strong choice for electronics and industrial parts near heat or ignition sources.
Manufacturing processes
About
Flame retardant resin is formulated to self-extinguish rather than sustain a flame, typically achieving a UL94 V-0 rating – the highest standard flammability classification – though certification depends on wall thickness.
Heat resistance varies notably between specific formulations, with heat deflection temperatures ranging from ~80 °C up to over 250 °C depending on the product, so flame retardancy alone doesn't guarantee high-temperature performance.
Flame retardant resin suits electrical connectors, housings, and industrial components operating near heat-generating equipment or ignition sources.
Technical Details
- Accuracy
- ±0.2% (lower limit of ±0.1 mm)
- Density
- 1.14 g/cm³
- Min. wall thickness
- 0.6 mm
Technical Properties
- Tensile strength
- 28.5 - 43 MPa
- Tensile modulus
- 1537 - 4200 MPa
- Tensile elongation
- 1 - 8%
- Flexural strength
- 67 - 75 MPa
- Flexural modulus
- 4300 - 4400 MPa
- HDT (0.45 MPa)
- 59.8 - 95°C
- Default layer height
- 0.1 mm
- Default infill
- 100%
- Embossing
- min. 0.5 mm
- Engraving
- min. 0.5 mm
- Interlocking parts
- Yes
- Warping risk
- Low
- Maximum printing dimensions
- 353 × 196 × 350 mm