About

The material used in this process is a curable UV resin, a full-color plaster that comes with a glossy or a sandstone surface. It is the perfect material for colorful figurines, life-like models, avatars, and other products that lend themselves to colorful, high-quality printing. When printing in this material, some variation in color shade is unavoidable, especially with difficult-to-produce colors such as browns and skin tones. You may see differences in color when looking at multiple prints of the same model side by side.

Technical Details

Accuracy

±0.2% (lower limit of ±0.1 mm)

Density

1.01 g/cm³

Min. wall thickness

1 mm

Tensile strength

50 - 80 MPa

Tensile modulus

1400 - 3500 MPa

Tensile elongation

5 - 40%

Flexural strength

60 - 130 MPa

Flexural modulus

1700 - 3200 MPa

HDT (0.45 MPa)

45 - 60°C

Default layer height

0.03 mm

Default infill

100%

Embossing

min. 0.5 mm

Engraving

min. 0.5 mm

Interlocking parts

Yes

Warping risk

Low