Material

MoldJet® 316L Steel

MoldJet® 316L Stainless Steel is a 316L from a sinter-based process that reaches about 99.9% relative density, with near-isotropic tensile strength and high ductility, suited to corrosion-resistant parts.

Manufacturing processes

MoldJet 

About

MoldJet® 316L Stainless Steel is a low-carbon austenitic stainless steel made by Tritone’s sinter-based process.

The MoldJet® technology involves a mold from a liquid photopolymer, which is then filled with 316L Steel powder. After the powder is deposited, the mold is cured and the metal is sintered, resulting in a solid metal part. This method allows for high-resolution, complex geometries with good surface finishes.

MoldJet® 316L Stainless Steel is a good option for corrosion-resistant parts that need uniform properties in every direction.

Technical Details

Accuracy
±0.3% (lower limit of ±0.2 mm)
Density
7.9 g/cm³
Min. wall thickness
0.2 mm

Technical Properties

Tensile strength
530 - 591 MPa
Default infill
99%
Interlocking parts
Yes
Warping risk
Yes, for parts over 140mm or parts with thin long structures

Finishes

  • Standard Sintered

Properties

  • Strong
  • Heat resistant
  • Chemical resistant
  • Corrosion resistant
  • Water resistant
  • Functional

Colors