About

Printed with a new co-extrusion technology, PA CCF results in a strong, lightweight print. The print can be used in high demanding applications and can replace metals in many cases. Smoothed nylon PA12 is used to print the surface perimeter of the part to give it a smooth texture while nylon PA12 reinforced with continuous carbon fiber is printed inside the part as another layer of perimeter and infill. The perimeter layers, infill pattern, and density, can be customized as per the requirements of the end part. A standard print will consist of four plastic perimeter layers followed by two composite perimeter layers and the infill percentage of your choosing (in the next step) with an Isogrid pattern. To customize these settings, feel free to add your requirements in the production note and we'll get back to you.

Technical Details

Accuracy

±1.6% (lower limit of ±0.3 mm)

Density

1.06 g/cm³

Min. wall thickness

2.9 mm

Tensile strength

69 - 75 MPa

Tensile modulus

3700 - 4000 MPa

Tensile elongation

2.9 - 6%

Flexural strength

100 - 115 MPa

Flexural modulus

3500 - 3600 MPa

Default layer height

0.2 mm

Embossing

min. 0.5 mm

Engraving

min. 0.5 mm

Interlocking parts

Yes

Warping risk

Low