Material
LithaBone HA 400
LithaBone HA 400 is a hydroxyapatite ceramic (85% relative density, 15% porosity) that is absorbed more slowly than tricalcium phosphate, giving the body more time to heal, made from HA powder certified to ASTM F1185-03.
Manufacturing processes
About
LithaBone HA 400 is based on hydroxyapatite, the mineral that forms the main inorganic component of bone, which makes it biocompatible and osteoconductive.
Sintered parts have a relative density of 85% (15% porosity) and are not cytotoxic according to ISO 10993-5:2009.
Hydroxyapatite takes longer to be absorbed by the body than tricalcium phosphate, giving the body more time to heal. Note that these are material test results, not approval of a finished implant.
LithaBone HA 400 is well suited to patient-specific bone substitute implants and scaffolds with defined pore geometries.
Technical Details
- Accuracy
- ±0.2% (lower limit of ±0.2 mm)
- Density
- 3.16 g/cm³
- Min. wall thickness
- -
Technical Properties
- Default layer height
- 0.025 mm
- Default infill
- 100%
- Interlocking parts
- Yes
- Warping risk
- Low
- Maximum printing dimensions
- 100 × 60 × 300 mm