Craftcloud offers a wide range of materials, including plastics, metals, and a variety of finishes and colors for each.
83 results
Nylon PA12 is one of the most widely used SLS materials. It is a tough, versatile plastic with low moisture absorption and good chemical resistance for durable functional parts.
PETG offers good impact resistance and strong layer adhesion, plus reliable chemical and moisture resistance. It is a good choice for everyday functional parts.
ABS is a durable, impact-resistant plastic with good heat tolerance, and is well suited to functional parts and prototypes that need to handle everyday stress.
Developed by HP, MJF Nylon is a widely used material for strong and detailed end-use parts and prototypes.
PLA is a low-cost, rigid plastic with excellent dimensional accuracy, and is a good choice for prototypes and functional parts that do not require strength or heat resistance.
ASA is a durable plastic with outstanding UV and weather resistance, which makes it the top choice for parts exposed to prolonged sunlight and outdoor conditions.
Tough resin is an impact-modified photopolymer that trades some of standard resin's stiffness for significantly better elongation and impact resistance. This makes it better suited to functional parts that need to withstand stress without cracking.
PLA+ and Tough PLA offer enhanced strength and durability compared to regular PLA, which makes them ideal for functional prototypes and mechanical parts.
Aluminum Alloy 6061 offers excellent strength-to-weight performance, good corrosion resistance, and reliable dimensional stability. It is ideal for lightweight structural parts, prototypes, and functional components requiring durability and machinability.
Standard resin is a general-purpose photopolymer optimized for fine detail and a smooth surface finish. It offers good rigidity but limited impact resistance, making it suitable for visual models and detailed prototypes, rather than functional parts.
TPU is a versatile elastomer family that ranges from soft, highly stretchable rubber-like grades to firmer, semi-rigid formulations.
High-detail resin is a photopolymer formulated to minimize shrinkage and maximize edge sharpness and surface resolution, capturing extremely fine features like engraved text and fabric texture that other materials can't reproduce as reliably.
Translucent resin allows light to pass through with a soft, diffused effect rather than true see-through clarity. This makes it the practical choice when frosted light diffusion is the goal rather than optical clarity.
SLS flexible TPU is a rubber-like, tear-resistant material with very good shock absorption and abrasion resistance. It's suitable for flexible functional prototypes and wear-prone parts.
Elastic resin (Shore 50A–65A) is a soft, rubber-like photopolymer with high elongation and good rebound, ideal for prototyping silicone-like parts that need to stretch, compress, and flex repeatedly.
Flexible resin (Shore 80A) is a soft-touch, rubber-like photopolymer similar in firmness to a shoe heel. It combines flexibility with more rigidity and detail retention than elastic resin.
Wood-filled PLA blends real wood fiber with PLA to create a filament that looks, feels, and can be finished like natural wood, and it is prized for its appearance rather than mechanical strength.
Sterling silver is the perfect material for jewelry and unique metal art pieces.
Carbon Fiber PLA is a reinforced composite that significantly increases stiffness and dimensional stability over standard PLA, though this comes at the cost of increased brittleness.
PCTG is a tougher, clearer alternative to PETG. It offers notably better impact resistance and moisture resistance while it retains PETG's ease of use and chemical resistance.
HP® 3D HR PA 12 S delivers exceptional surface quality and precision right out of the printer. The material is perfect for functional prototypes and high-end consumer goods.
Glass fiber nylon (PA-GF) adds stiffness, heat resistance, and dimensional stability to nylon at a lower cost than carbon fiber nylon, while retaining significantly better impact resistance and toughness.
FDM TPE is a softer, more rubber-like flexible material than TPU. It offers excellent comfort and stretch for grip and cushioning applications, though with less abrasion, chemical, and heat resistance.
Multi Jet Fusion PA11, produced by HP, is a bio-derived powder with exceptionally high toughness. This material offers high ductility and impact strength for all applications, especially functional parts.
Plated brass is lost wax cast brass with a tin-rhodium underplate and a thin gold or rhodium plating, nickel-free and suited to occasional-wear jewelry, though the plating wears through over time.
Nylon PA11 is a bio-based nylon, made from castor oil, with high ductility and impact resistance. It is suitable for durable functional parts that need to flex or absorb impact.
High-temperature resin offers a notably higher heat deflection temperature than standard resin. This makes it a strong choice for heat-resistant mounts, fixtures, and housings that need to hold their shape under sustained heat.
Recycled rPETG reprocesses post-consumer or post-industrial PETG waste into new filament. It offers a sustainable alternative to virgin PETG with comparable strength, toughness, and chemical resistance.
Somos® EvoLVe 128 is a tough, white resin that looks and feels like a finished plastic, suited to functional prototypes, snap-fits, and fixtures, though it softens at about 50 °C.
FDM PEEK is a premium engineering thermoplastic that combines exceptional heat resistance, strength, and chemical resistance with genuine biocompatibility. It is used where metal replacement or medical-grade performance is required.
SLS polypropylene is a lightweight, ductile, chemically resistant plastic that tolerates repeated bending. It is suited to durable functional parts, though it softens at around 60 °C under load.
Bronze (90% copper, 10% tin) is a harder, more tarnish-resistant alternative to brass with a warm reddish tone, suited to antique-style jewelry, miniatures, and decorative parts.
BioMed resin is a biocompatible photopolymer certified under ISO 10993 for medical device applications, with specific contact type and duration varying by exact formulation.
Accura® Xtreme is a tough resin with good elongation that simulates polypropylene and ABS for snap-fits, assemblies, and functional prototypes, though it deflects under load at only about 54–62 °C.
Rigid resin is a glass-reinforced photopolymer that offers a high level of detail, stiffness, and deformation resistance.
Recycled rPLA reprocesses post-consumer or post-industrial PLA waste into new filament. It offers a more sustainable alternative to virgin PLA with generally similar, though somewhat more variable, mechanical properties.
Castable resin is a synthetic photopolymer engineered to burn out cleanly with minimal ash during investment casting. It offers a more affordable alternative to wax-based casting patterns.
ULTEM 1010 offer the highest tensile strength and the highest chemical and thermal resistance of any FDM thermoplastic.
Accura® 25 is a white, polypropylene-like resin (Shore 80D) with good elongation and shape retention, used to simulate and replace CNC-machined polypropylene parts such as snap-fits and functional assemblies.
Durable resin is a polypropylene-like photopolymer with low modulus, high elongation, and the highest impact strength of common resin options. It is ideal for pliable parts like living hinges and low-friction moving components.
Copper is a base metal with very high electrical and thermal conductivity, good ductility, and naturally antimicrobial surfaces, suited to heat-management parts, coils, and electrical components.
Figure 4® HI TEMP 300-AMB is a rigid, translucent amber resin with a heat deflection temperature above 300 °C even under higher load, suited to testing high-temperature parts, molds, and flow visualization, though it is brittle.
Metal-filled PLA is PLA loaded with fine metal powder (about 20–80% by weight), giving heavier, metal-looking parts that can be polished, mainly for decorative pieces, though it is brittle.
MJF flexible TPU is a rubber-like, tear-resistant material with high rebound and good abrasion resistance that's suited to flexible functional prototypes and wear-prone parts.
ULTEM 9085 is a high-performance thermoplastic with excellent chemical resistance and an extreme level of flame retardancy.
SLS PEEK is a high-performance thermoplastic that offers high tensile strength, good heat resistance, and broad chemical resistance in a lightweight part, if with low ductility.
Gold is a precious metal, typically offered as solid 14K or 18K in yellow, red, and white tones, used for jewelry and unique art pieces.
PA 2200 is a widely used white nylon 12 grade with a balanced profile of strength, stiffness, and chemical resistance. It is a standard for functional SLS prototypes and rugged, end-use industrial components.
PPSU is a heat- and chemical-resistant material suited for automotive, aerospace, and plumbing applications.
Lightweight PLA (LW-PLA) is a specialized 3D printing filament that expands up to three times its volume for lighter prints without losing the strength of standard PLA.
Glass fiber PEEK is PEEK reinforced with glass fiber for better creep resistance, stiffness, and dimensional stability under sustained load at high temperature, with PEEK’s broad chemical resistance, though it is less suited to wear applications.
Flame-retardant PA 12 for MJF, offering durability, dimensional stability, and fire compliance for functional and safety-critical parts.
Formlabs's surgical guide resin is a CE certified, biocompatible material that meets Class I requirements.
Alumide is an aluminum-filled nylon 12 with a metallic gray look, high stiffness, and heat deflection around 144 °C under load, suited to rigid parts, jigs, and models, though it is less flexible than standard nylon.
Glass fiber ULTEM 1010 is ULTEM 1010 polyetherimide reinforced with glass fiber for added stiffness and dimensional stability, built on a resin with a glass transition of about 215 °C.
HP® 3D HR PA 12 W is a high-reusability, white nylon (polyamide 12) designed for durable, functional 3D printed parts with excellent chemical and mechanical resistance.
PEKK filament is a high-performance thermoplastic from the PAEK family, known for excellent thermal and chemical resistance, and mechanical strength. Ideal for aerospace, automotive, and high-tech industries, it excels in demanding environments.
420/BR is a bronze-infused stainless steel that offers good strength and wear resistance for decorative and industrial parts, but less corrosion resistance than solid stainless steel.
Temperature-based color-changing PLA is ideal for novelty prints.
SLS flexible TPE is a rubber-like elastomer, available from very soft to firm, that withstands repeated bending and vibration, suited to gaskets, dampers, and soft functional parts, though it is weak and softens at modest temperatures.
High-detail bronze (90% copper, 10% tin) is a harder, more tarnish-resistant alternative to brass with a warm reddish tone, suited to jewelry and miniatures with very small sections.
Markforged® copper is a 99.8% pure copper with 84% IACS electrical conductivity and 350 W/m·K thermal conductivity. It is soft and ductile, and is suited to heat sinks, bus bars, and induction coils.
CNC Copper 101, also known as Oxygen-Free Electronic (OFE) copper, is a high-purity alloy with 99.99% copper content, providing excellent electrical and thermal conductivity.
PEEK is a high-strength, heat-resistant thermoplastic with exceptional chemical resistance, wear resistance, and dimensional stability. Ideal for high-performance components in aerospace, automotive, and medical industries.
Brass C260 produces strong, corrosion-resistant parts with excellent formability and an attractive gold-colored finish. It is ideal for precision components, decorative hardware, and electrical applications.
PEEK GF30 produces extremely strong, stiff, and heat-resistant parts with excellent dimensional stability and chemical resistance, ideal for high-performance structural applications.
Copper CuCr1Zr is a high-performance copper alloy with superior thermal/electrical conductivity, strength, and high-temperature softening resistance. Ideal for welding electrodes, heat sinks, and rocket components.
9-4 Aluminum Bronze is a strong, wear-resistant copper alloy with excellent corrosion resistance. Ideal for bushings, bearings, gears, and valve components in demanding environments.
ULTEM 2300 produces high-strength, heat-resistant parts with excellent stiffness, dimensional stability, and flame resistance. It is ideal for structural and high-performance engineering applications.
PEI ULTEM 1000 is a high-strength, heat-resistant thermoplastic ideal for aerospace, automotive, and industrial applications. It offers excellent flame resistance, mechanical properties, and dimensional stability.
Copper C182 (chromium copper) combines high electrical conductivity with good strength retention at elevated temperatures. This makes it a strong choice for resistance welding equipment and high-current electrical components.
Copper C180 is a beryllium-free alternative to the nickel-beryllium copper family. It offers strong mechanical properties and moderate conductivity.
Copper C17510 (nickel-beryllium copper) trades some of C17200's extreme strength for substantially better electrical conductivity. This makes it the better choice when both performance and conductivity matter more than peak strength alone.
Copper C172 (beryllium copper) is the strongest copper alloy commercially available, reaching tensile strength comparable to steel while retaining useful electrical conductivity, though machining requires strict beryllium dust controls.
Copper C150 is a zirconium copper alloy that retains nearly all of pure copper's exceptional electrical conductivity while offering improved strength and resistance to softening at elevated temperatures.
Copper C102 is oxygen-free copper (99.95% minimum) with the same high conductivity as standard copper. It is chosen where purity matters, such as vacuum use and brazed or welded assemblies.
Copper C145, also known as tellurium copper, is copper with a small tellurium addition. It offers high electrical and thermal conductivity with mechanical properties similar to pure copper, and is a common choice for machined copper parts.
Laser cutting is a precise manufacturing process that uses a high-powered laser beam to melt, burn, or vaporize material, creating clean and accurate cuts in various wood types.
Solid oak is a strong, hard, heavy hardwood with a bold, visible grain, suited to CNC-machined furniture parts, signage, and decorative pieces.
Copper C110 produces highly conductive, corrosion-resistant parts with excellent thermal and electrical performance. It is ideal for electrical, thermal, and precision components requiring reliable conductivity.
Bronze C932 produces durable, wear-resistant parts with excellent machinability and good corrosion resistance. It is ideal for bushings, bearings, and components requiring low friction and long service life.
CNC-machined Copper C122 (DHP copper) is a phosphorus-deoxidized copper that welds and brazes well and resists hydrogen embrittlement, with lower conductivity than C110.
CNC-machined Copper Nickel C706 (90/10) is a copper-nickel alloy with excellent seawater corrosion resistance and good resistance to biofouling, a lower-cost choice for marine piping and valve parts.