Somos® GP Plus 14122

SLA 

Somos GP Plus 14122 is ideal for functional prototypes, concept models, and low volume production parts.

About

Somos GP Plus 14122 is ideal for prototyping all kinds of plastic parts which do not have the highest of toughness requirements. It is also capable of delivering fine details and a smooth surface. Just be aware that thin prints can be slightly fragile, as the used photopolymers are quite brittle.

Technical Details

Accuracy
±0.2% (lower limit of ±0.2 mm)
Density
1.2 g/cm³
Min. wall thickness
0.6 mm

Technical Properties

Tensile strength
33.8 - 40.2 MPa
Tensile modulus
2370 - 2650 MPa
Tensile elongation
6 - 9%
Flexural strength
6.8 - 67.8 MPa
Flexural modulus
2178 - 2222 MPa
HDT (0.45 MPa)
46°C
HDT (1.8 MPa)
41°C
Warping risk
N/A

Finishes

  • Standard

Colors

 

Properties

  • Functional
  • High detail
  • Visual
  • Smooth