About

Multicolor FDM prints produced with two or more PLA filaments create visually dynamic parts that combine color variety with the strength and reliability of standard PLA. By using multi-extrusion or filament-switching techniques, these prints achieve smooth transitions or sharply defined color boundaries, depending on the design. The result is a part that maintains PLA’s excellent dimensional accuracy, stiffness, and ease of printing, while adding enhanced aesthetic appeal. This method is well-suited for decorative models, brand prototypes, and educational or artistic applications that benefit from vivid, layered color effects. Multicolor PLA parts retain the same eco-friendly, low-warping properties as single-color prints, making them both durable and visually distinctive.

Technical Details

Accuracy

±0.3% (lower limit of ±0.2 mm)

Density

1.24 g/cm³

Min. wall thickness

1 mm

Tensile strength

26.8 - 70 MPa

Tensile modulus

1817 - 3973 MPa

Tensile elongation

1.9 - 20%

Flexural strength

46.2 - 88 MPa

Flexural modulus

2461 - 3800 MPa

HDT (0.45 MPa)

50 - 55°C

Default layer height

0.2 mm

Default infill

20%

Embossing

min. 0.4 mm

Engraving

min. 0.4 mm

Interlocking parts

Yes

Warping risk

Low