SLS Nylon PA12

Nylon PA12 is one of the most widely used SLS materials. It is a tough, versatile plastic with low moisture absorption and good chemical resistance for durable functional parts.

SLS

+56

PETG

PETG offers good impact resistance and strong layer adhesion, plus reliable chemical and moisture resistance. It is a good choice for everyday functional parts.

FDM

+51

Aluminum (AlSi10Mg)

AlSi10Mg is a lightweight cast-type aluminum alloy with high as-built strength and good thermal and electrical conductivity, suited to functional metal parts, with strength and ductility depending on heat treatment.

SLM / DMLS

316L Stainless Steel

316L Stainless Steel is a highly durable alloy known for its corrosion resistance and versatility in both industrial and aesthetic applications.

SLM / DMLSLMMDMP

ABS

ABS is a durable, impact-resistant plastic with good heat tolerance, and is well suited to functional parts and prototypes that need to handle everyday stress.

FDM

+51

PLA

PLA is a low-cost, rigid plastic with excellent dimensional accuracy, and is a good choice for prototypes and functional parts that do not require strength or heat resistance.

FDM

+128

HP® MJF Nylon PA12

Developed by HP, MJF Nylon is a widely used material for strong and detailed end-use parts and prototypes.

MJF

+25

ASA

ASA is a durable plastic with outstanding UV and weather resistance, which makes it the top choice for parts exposed to prolonged sunlight and outdoor conditions.

FDM

+39

Tough Resin

Tough resin is an impact-modified photopolymer that trades some of standard resin's stiffness for significantly better elongation and impact resistance. This makes it better suited to functional parts that need to withstand stress without cracking.

SLALCDDLP+4

+28

Titanium

The strongest 3D printable material, titanium offers good dimensional accuracy and fine details.

SLM / DMLSLMM

PLA+ (Tough PLA)

PLA+ and Tough PLA offer enhanced strength and durability compared to regular PLA, which makes them ideal for functional prototypes and mechanical parts.

FDM

+39

Standard Resin

Standard resin is a general-purpose photopolymer optimized for fine detail and a smooth surface finish. It offers good rigidity but limited impact resistance, making it suitable for visual models and detailed prototypes, rather than functional parts.

SLADLPMSLA+3

+58

17-4 PH Stainless Steel

17-4 PH Stainless Steel is a martensitic precipitation-hardening steel with very high strength and hardness after heat treatment and corrosion resistance similar to 304, though it is magnetic and less corrosion resistant than 316.

SLM / DMLSLMMDMP

FDM TPU

TPU is a versatile elastomer family that ranges from soft, highly stretchable rubber-like grades to firmer, semi-rigid formulations.

FDM

+42

Aluminum Alloy 6061

Aluminum Alloy 6061 offers excellent strength-to-weight performance, good corrosion resistance, and reliable dimensional stability. It is ideal for lightweight structural parts, prototypes, and functional components requiring durability and machinability.

SLM / DMLS

MJF Glass-Filled Nylon PA12

MJF glass-filled nylon PA12 is a stiff PA12 with the same properties in every direction and higher heat deflection under load than standard nylon. It is a good choice for rigid functional parts.

MJF

+8

High-Detail Resin

High-detail resin is a photopolymer formulated to minimize shrinkage and maximize edge sharpness and surface resolution, capturing extremely fine features like engraved text and fabric texture that other materials can't reproduce as reliably.

DLPSLAMSLA+4

+40

Polycarbonate

Polycarbonate (PC) is an engineering-grade plastic with the highest heat resistance and impact strength of common FDM materials, and it is ideal for demanding functional parts and prototypes.

FDM

+3

Carbon Fiber PETG

Carbon fiber PETG is a reinforced composite that adds significant stiffness and dimensional stability to standard PETG, trading some impact resistance for rigidity. It is ideal for parts that need to hold their shape under load.

FDM

Translucent Resin

Translucent resin allows light to pass through with a soft, diffused effect rather than true see-through clarity. This makes it the practical choice when frosted light diffusion is the goal rather than optical clarity.

SLADLPMSLA+2

+10

Maraging Steel

Featuring high strength and hardness, M300 maraging steel is best used for tooling applications.

SLM / DMLS

Transparent Resin

Transparent resin is a clear photopolymer that is capable of true glass-like optical clarity. It's an ideal choice for parts where you need to see clearly through the material.

SLAPolyJetMSLA+2

Carbon Fiber ASA

Carbon fiber ASA is a reinforced composite that adds stiffness and dimensional stability to standard ASA while retaining its signature UV and weather resistance. It is a strong choice for structural outdoor parts.

FDM

SLS Flexible TPU

SLS flexible TPU is a rubber-like, tear-resistant material with very good shock absorption and abrasion resistance. It's suitable for flexible functional prototypes and wear-prone parts.

SLS

+16

Carbon Fiber FDM Nylon

Carbon fiber nylon is a reinforced composite that significantly increases stiffness and heat resistance over standard nylon, trading away some of nylon's signature impact resistance and flexibility in the process.

FDM

Elastic Resin

Elastic resin (Shore 50A–65A) is a soft, rubber-like photopolymer with high elongation and good rebound, ideal for prototyping silicone-like parts that need to stretch, compress, and flex repeatedly.

SLADLPMSLA+3

FDM Nylon

FDM nylon is a tough, wear-resistant engineering plastic known for high impact resistance, low friction, and the ability to flex repeatedly without cracking, all of which make it ideal for functional, moving parts.

FDM

+3

Nylon-Like Resin

Nylon-like resin is an impact-modified photopolymer formulated to mimic nylon's flexibility and toughness, offering meaningfully better durability than standard resin. However, it doesn't fully match the toughness of actual printed nylon.

MSLASLALCD+3

High-Detail 316L Steel

High-Detail 316L Stainless Steel offers an incredible level of detail coupled with remarkable strength, and corrosion resistance.

High-Detail SLM

Sterling Silver

Sterling silver is the perfect material for jewelry and unique metal art pieces.

Lost Wax Casting

Flexible Resin

Flexible resin (Shore 80A) is a soft-touch, rubber-like photopolymer similar in firmness to a shoe heel. It combines flexibility with more rigidity and detail retention than elastic resin.

SLADLPMSLA+3

+8

Carbon Fiber PLA

Carbon Fiber PLA is a reinforced composite that significantly increases stiffness and dimensional stability over standard PLA, though this comes at the cost of increased brittleness.

FDM

+1

PCTG

PCTG is a tougher, clearer alternative to PETG. It offers notably better impact resistance and moisture resistance while it retains PETG's ease of use and chemical resistance.

FDM

+18

HP® 3D HR PA 12 S, enabled by Arkema

HP® 3D HR PA 12 S delivers exceptional surface quality and precision right out of the printer. The material is perfect for functional prototypes and high-end consumer goods.

MJF

+22

PC-ABS

PC-ABS is a polymer blend that combines polycarbonate's heat resistance and toughness with ABS's easier processability and dimensional stability, striking a middle ground between the two.

FDM

FDM TPE

FDM TPE is a softer, more rubber-like flexible material than TPU. It offers excellent comfort and stretch for grip and cushioning applications, though with less abrasion, chemical, and heat resistance.

FDM

+18

Inconel 718

This nickel-based alloy is exceptional for parts used in high-temperature environments.

SLM / DMLS

Plated Brass

Brass plated with a precious metal coating is perfect for jewelry pieces.

Lost Wax Casting

Glass Fiber FDM Nylon

Glass fiber nylon (PA-GF) adds stiffness, heat resistance, and dimensional stability to nylon at a lower cost than carbon fiber nylon, while retaining significantly better impact resistance and toughness.

FDM

+3

Accura® ClearVue

Accura® ClearVue is a clear, transparent resin with low moisture absorption that simulates the appearance of polycarbonate and ABS, suited to lens and headlamp models, fluid-flow visualization, and transparent assemblies.

DLPSLAMSLA+1

Somos® Evolve

Somos Evolve is the perfect material for strong, highly detailed functional prototypes and parts that need to withstand continuous usage.

SLA

+4

Silicone Rubber

Elastic silicone rubber (AR-G1) allows for thin walls and fine details while still providing the resistance and flexibility of silicone.

Inkjet

HP® MJF Nylon PA11

Multi Jet Fusion PA11, produced by HP, is a bio-derived powder with exceptionally high toughness. This material offers high ductility and impact strength for all applications, especially functional parts.

MJF

+19

High-Temperature Resin

High-temperature resin offers a notably higher heat deflection temperature than standard resin. This makes it a strong choice for heat-resistant mounts, fixtures, and housings that need to hold their shape under sustained heat.

SLADLPMSLA+3

+1

Recycled rPETG

Recycled rPETG reprocesses post-consumer or post-industrial PETG waste into new filament. It offers a sustainable alternative to virgin PETG with comparable strength, toughness, and chemical resistance.

FDM

+14

Flame Retardant Polycarbonate

Flame retardant polycarbonate (PC-FR) combines polycarbonate's strength and heat resistance with a UL94 V-0 fire rating. This makes it a strong choice for electrical enclosures and components near heat sources.

FDM

SLS Nylon PA11

Nylon PA11 is a bio-based nylon, made from castor oil, with high ductility and impact resistance. It is suitable for durable functional parts that need to flex or absorb impact.

SLS

+25

SLS Polypropylene

SLS polypropylene is a lightweight, ductile, chemically resistant plastic that tolerates repeated bending. It is suited to durable functional parts, though it softens at around 60 °C under load.

SLS

+1

FDM PMMA

Polymethyl Methacrylate (PMMA), commonly known as acrylic or plexiglass, offers strong optical clarity and excellent UV resistance, though it's notably more brittle and less impact-resistant than materials like ABS or polycarbonate.

FDM

Food Safe SLS Nylon PA12

SLS food safe nylon PA12 is a durable, chemical-resistant nylon made from a powder grade certified for food contact, suited to tools and components used in food processing.

SLS

BioMed Resin

BioMed resin is a biocompatible photopolymer certified under ISO 10993 for medical device applications, with specific contact type and duration varying by exact formulation.

SLADLPcDLM+2

Accura® Xtreme

Accura® Xtreme is a tough resin with good elongation that simulates polypropylene and ABS for snap-fits, assemblies, and functional prototypes, though it deflects under load at only about 54–62 °C.

SLAMSLADLP+1

+4

Rigid Resin

Rigid resin is a glass-reinforced photopolymer that offers a high level of detail, stiffness, and deformation resistance.

SLADLPcDLM+4

Flame Retardant PETG

Flame retardant PETG combines the mechanical strength and chemical resistance of regular PETG with enhanced fire safety.

FDM

Castable Resin

Castable resin is a synthetic photopolymer engineered to burn out cleanly with minimal ash during investment casting. It offers a more affordable alternative to wax-based casting patterns.

DLPSLAMSLA+1

SLS Nylon PA 2200

PA 2200 is a widely used white nylon 12 grade with a balanced profile of strength, stiffness, and chemical resistance. It is a standard for functional SLS prototypes and rugged, end-use industrial components.

SLS

+46

Glass Fiber ASA

Glass Fiber ASA enhances standard ASA with glass fiber reinforcement, offering greater stiffness, heat resistance, and dimensional stability. It resists UV and weathering, making it ideal for outdoor and structural applications.

FDM

FDM Polypropylene

Polypropylene is a versatile and durable material, highly suitable for compliant and functional parts. The FDM technology provides a cheaper alternative to SLS or MJF printed parts.

FDM

+3

MBJ 316L Steel

316L Stainless Steel printed with Metal Binder Jetting technology.

Binder Jetting

Recycled rPLA

Recycled rPLA reprocesses post-consumer or post-industrial PLA waste into new filament. It offers a more sustainable alternative to virgin PLA with generally similar, though somewhat more variable, mechanical properties.

FDM

+22

Durable Resin

Durable resin is a polypropylene-like photopolymer with low modulus, high elongation, and the highest impact strength of common resin options. It is ideal for pliable parts like living hinges and low-friction moving components.

SLADLPMSLA+2

+7

Spectroplast® TrueSil

TrueSil is a 3D printable pure silicone offering high flexibility, biocompatibility, and durability. Ideal for seals, wearables, and medical parts, it resists heat, UV, and repeated deformation.

DLPSAM

ULTEM 9085

ULTEM 9085 is a high-performance thermoplastic with excellent chemical resistance and an extreme level of flame retardancy.

FDM

HIPS

HIPS is a material blend of polystyrene plastic and polybutadiene rubber. The mixture of these polymers results in a material that is both tough and resistant to impact.

FDM

GreenTec Pro

GreenTec Pro is a high performance biodegradable material made from 100% natural resources. With a high heat resistance (up to 160 °C) and mechanical stress resistance, the material is ideal for demanding applications.

FDM

Accura® 25

Accura® 25 is a white, polypropylene-like resin (Shore 80D) with good elongation and shape retention, used to simulate and replace CNC-machined polypropylene parts such as snap-fits and functional assemblies.

DLPSLAMSLA+1

+4

Somos® GP Plus 14122

Somos GP Plus 14122 is ideal for functional prototypes, concept models, and low volume production parts.

SLA

PETG-HT

PETG-HT is an enhanced version of PETG, specifically designed to withstand high temperatures and exhibit excellent mechanical properties.

FDM

PET

PET 3D prints offer a strong balance of toughness, chemical resistance, and dimensional stability. The material produces durable parts with good layer adhesion and a semi-gloss surface finish.

FDM

PHA

PHA (Polyhydroxyalkanoate) filament is a biodegradable type of plastic used in 3D printing, made through the fermentation of plant sugars by bacteria. It a great choice for applications that require biodegradability.

FDM

SLS Nylon PA6

Nylon PA6 is a stiff, heat-resistant nylon that is stronger than PA12 when dry. It is sutiable for rigid functional parts, though it absorbs more moisture and is less flexible.

SLS

VisiJet® Armor M2G-CL

VisiJet® Armor M2G-CL offers high strength, impact resistance, and precise dimensional accuracy. The material’s light gray color and durability make it ideal for functional prototypes and end-use parts that require high mechanical performance.

MJP

Somos® PerFORM

Somos PerFORM is the material of choice for applications that require strong, stiff, temperature-resistant composite parts.

SLA

Ceramic Resin

Ceramic resin is a high-resolution photopolymer that produces rigid parts with excellent stiffness, heat resistance, and dimensional accuracy.

LCDSLAMSLA

Recycled rASA

Recycled rASA reprocesses post-consumer or post-industrial ASA waste into new filament. It offers a more sustainable alternative to virgin ASA, though it has a more limited recyclability than PLA, ABS, or PETG.

FDM

iglidur® I180-PF

iglidur I180-PF by igus is a material with high wear resistance, especially designed for moving parts.

FDM

PVB

PVB filament is flexible, strong, and offers excellent transparency and a smooth finish, ideal for glossy, impact-resistant 3D prints.

FDM

Lightweight PLA

Lightweight PLA (LW-PLA) is a specialized 3D printing filament that expands up to three times its volume for lighter prints without losing the strength of standard PLA.

FDM

+3

iglidur® I150-PF

iglidur I150-PF by igus features a high abrasion resistance at low speeds combined with good mechanical properties.

FDM

Surgical Guide Resin

Formlabs's surgical guide resin is a CE certified, biocompatible material that meets Class I requirements.

SLAMSLADLS+1

HP® 3D HR PA 12 FR, enabled by Evonik

Flame-retardant PA 12 for MJF, offering durability, dimensional stability, and fire compliance for functional and safety-critical parts.

MJF

+19

Recycled rABS

Recycled rABS reprocesses post-consumer or post-industrial ABS waste into new filament. It offers a sustainable alternative to virgin ABS with mechanical properties that hold up well through recycling.

FDM

SLS Nylon PA66

Nylon PA66 is a strong, stiff nylon with good chemical resistance and heat tolerance, well above PA12 in strength and stiffness, though it absorbs far more moisture.

SLS

SLS Glass-Filled Nylon PA6

SLS glass-filled nylon PA6 is a very stiff nylon composite with high heat deflection (about 200 °C under load). It's a good choice for rigid, heat-exposed functional parts, though the material is not flexible and still absorbs moisture.

SLS

PVA

PVA is a water-soluble thermoplastic used primarily as support material in FDM printing. It dissolves cleanly in water, enabling complex geometries, internal channels, and delicate details that would be difficult or impossible with breakaway support.

FDM

BASF® Glass Fiber Polypropylene

Glass-filled polypropylene is a tough material with high strength that is also resistant to high temperatures. It is suitable for functional verification of product prototypes.

SLS

HP® 3D HR PA 12 W

HP® 3D HR PA 12 W is a high-reusability, white nylon (polyamide 12) designed for durable, functional 3D printed parts with excellent chemical and mechanical resistance.

MJF

+18

LithaCon 3Y 210 ZrO2

LithaCon contains zirconia stabilized with 3 mol% Yttria. Some of the mechanical highlights of these materials are their excellent flexural strength (> 1000 MPa), fracture toughness, resistance to abrasion, and thermal shock resistance.

LCM

420/BR Steel

420/BR is a bronze-infused stainless steel that offers good strength and wear resistance for decorative and industrial parts, but less corrosion resistance than solid stainless steel.

Binder Jetting

+1

Platinum

Lost wax cast platinum parts feature a smooth, reflective silvery-white finish with exceptional strength, density, and corrosion resistance. Ideal for fine jewelry and precision components requiring premium quality and longevity.

Lost Wax Casting

Nickel-Titanium (NiTi)

Nickel-Titanium (NiTi) is a shape memory alloy with superelasticity, fatigue resistance, and biocompatibility. Its phase transformations enable shape recovery after deformation, making it ideal for medical, aerospace, and robotic uses.

SLM / DMLS

LithaLox HP 500 Al2O3

Lithalox HP 500 contains a high-purity (99.99%) aluminum oxide (alumina) material and is characterized by its high density, a favorable 4-point bending strength, and exceptionally smooth surface quality.

LCM

PMMA

PMMA's strength and toughness makes it great for functional parts and high-quality prototypes, while being relatively affordable.

Binder Jetting

PC/PTFE

PC/PTFE is an advanced polycarbonate composite enriched with PTFE (Teflon). It offers high mechanical strength and exceptional abrasion resistance with low friction, making it ideal for industrial parts.

FDM

FDM PEBA

PEBA is a high-performance flexible material that combines the strength of nylon with the elasticity of rubber. It is characterized by its ultra-lightweight structure and a "high rebound" effect, delivering up to 85% energy return for dynamic parts.

FDM

SLS PEBA

SLS PEBA is a lightweight, flexible polyether block amide elastomer with high energy return and rubber-like fatigue resistance that stays flexible down to about -40 °C. It's suited to dampers and cushioning parts.

SLS

HP® 3D HR TPA, enabled by Evonik

HP 3D HR TPA is a durable, flexible elastomer for MJF printing, perfect for functional parts like gaskets, seals, and wearables that require repeated bending or impact resistance.

MJF

LithaBone TCP 300

LithaBone TCP 300 contains a beta-tricalcium phosphate (ß-TCP) based ceramic which in the right setting, enables implants with defined pore geometries. The material can be resorbed by the body and replaced by new bone.

LCM

Food Safe 316L Stainless Steel

Food contact safe, offers high hygiene, corrosion resistance, and strength. Performs up to 800°C (1472°F), versatile and easy to clean. Certifications available.

SLM / DMLS

Food Safe Aluminum

Food Safe Aluminum is a type of aluminum that is treated or coated to be safe for use in contact with food. Lightweight, good thermal conductivity, and strength. Performs up to 200°C (392°F), ideal for automotive, aerospace, and industrial uses.

SLM / DMLS

Food Safe Titanium

Food Safe Titanium is food contact safe, hygienic, corrosion resistant, and lightweight. Maintains strength up to 400°C (752°F), robust, non-magnetic, and easy to clean. Certifications available.

LMMSLM / DMLS

High-Detail 17-4 PH Stainless Steel

High-Detail 17-4 PH Stainless Steel is a superior 3D printing alloy, offering unparalleled detail precision coupled with exceptional mechanical resilience and corrosion resistance.

High-Detail SLM

SLS Flexible TPE

SLS flexible TPE is a rubber-like elastomer, available from very soft to firm, that withstands repeated bending and vibration, suited to gaskets, dampers, and soft functional parts, though it is weak and softens at modest temperatures.

SLS

+16

Flame Retardant SLS Nylon PA12

Flame retardant SLS nylon PA12 is PA12 formulated to self-extinguish, with fire ratings such as UL 94 V-0 that depend on wall thickness, suited to electrical and transport components, though it is less ductile than standard PA12.

SLS

Markforged® Inconel 625

Markforged Inconel 625 is a nickel chromium-based superalloy that is extremely resistant to corrosion and strong at high temperatures.

FDM

MoldJet® 316L Steel

316L Stainless Steel printed with Tritone MoldJet® technology.

MoldJet

Markforged® H13 Tool Steel

Markforged H13 tool steel is an abrasion-resistant, hard material with a good resistance to heat.

FDM

BASF® Ultrafuse 316L Steel

Ultrafuse 316L produces sintered 316L stainless steel parts with high ductility and corrosion resistance, similar in strength to annealed wrought 316L, though with lower yield strength than laser-melted 316L.

FDM

Aluminum 6061 (EN AW-6061)

Aluminum 6061 is a strong, lightweight alloy with excellent corrosion resistance and good machinability. Ideal for aerospace, automotive, and general-purpose CNC-milled parts.

CNC

Aluminum 7075 (EN AW-7075)

Aluminum 7075 is a high-strength, heat-treatable alloy with excellent strength-to-weight ratio and fatigue resistance. Ideal for aerospace, motorsports, and high-load structural components.

CNC

Acetal (POM-C)

Acetal (POM-C) is a high-performance copolymer known for its excellent machinability, dimensional stability, and low friction. Ideal for precision parts like gears and bearings, it offers high strength and moisture resistance.

CNC

Stainless Steel 303 (1.4305)

Stainless steel 303 is a corrosion-resistant, machinable alloy used for high-precision components such as gears, shafts, and fasteners in automotive, aerospace, and industrial applications.

CNC

Aluminum 5052 (EN AW-5052)

Aluminum 5052 is a strong, corrosion-resistant alloy ideal for CNC machining. It offers high fatigue strength, excellent workability, and is widely used in marine, automotive, and aerospace parts.

CNC

Aluminum 6082 (EN AW-6082)

Aluminum 6082 is a high-strength, corrosion-resistant alloy used in structural and aerospace applications. It offers good weldability, dimensional stability, and strength-to-weight ratio.

CNC

Acetal (Glass-Filled)

Acetal (glass-filled) is a reinforced engineering thermoplastic enhanced with glass fibers. This addition significantly increases the material's stiffness, creep resistance, and dimensional stability compared to standard acetal.

CNC

BASF® Ultracur3D® RG 3280

BASF® Ultracur3D® RG 3280 is a ceramic-filled resin designed for functional 3D printing. It offers high stiffness, excellent heat resistance, and a smooth white finish, which makes it ideal for durable prototypes and demanding end-use parts.

DLPLCDHPS

BASF® Ultracur3D® EL 60

Ultracur3D® EL 60 is a flexible, clear resin with excellent elasticity, tear resistance, and durability. It combines rubber-like performance with high accuracy, making it suitable for functional prototypes and industrial parts.

DLPLCDHPS

PETG CCF

PETG CCF is a co-extruded material consisting of Clear PETG with a composite of PETG & continuous carbon fibers. This unique combination results in a part with 20 times the tensile strength of PETG with a smooth translucent finish.

CFC

PVC

CNC machined PVC produces lightweight, corrosion-resistant parts with excellent chemical resistance, electrical insulation, and reliable dimensional stability for industrial and technical applications.

CNC

Nylon PA66

Nylon 6/6 produces strong, wear-resistant parts with excellent toughness, low friction, and good chemical resistance. It is ideal for durable mechanical components and precision applications.

CNC

Aluminum 2017A (EN AW-2017A)

Aluminum 2017A is a high-strength, heat-treatable alloy with excellent machinability, ideal for aerospace, automotive, and precision components requiring a strong, lightweight material.

CNC

Polycarbonate

Polycarbonate (PC) is a tough, transparent thermoplastic ideal for impact-resistant parts like lenses, covers, and housings in automotive, electronics, and protective applications.

CNC

PTFE (Teflon)

PTFE (Teflon) is a high-strength, chemically resistant material with excellent low friction, ideal for seals, bearings, gaskets, and components in food, pharmaceutical, and industrial applications.

CNC

Delrin® (POM-H)

Delrin® (POM-H) is a high-strength acetal homopolymer known for superior stiffness, hardness, and creep resistance. It is the go-to material for high-load mechanical parts like heavy-duty gears, bearings, and precision fasteners.

CNC

VisiJet® M2S-HT90

VisiJet® M2S-HT90 is a strong and rigid material for applications requiring temperature resistance and/or rigidity, ideal for rapid tooling, under the hood parts, enclosures and housings

MJP

BASF® Ultrafuse 17-4 PH Steel

Ultrafuse 17-4 PH produces sintered 17-4 PH stainless steel parts that are strong, magnetic, and corrosion resistant, and can be heat treated to higher strength, though with lower ductility than other metal 3D printing processes.

FDM

Nylon PA6

Nylon PA6 is a durable, wear-resistant thermoplastic with excellent impact strength, low friction, and good machinability. Ideal for precision mechanical components like gears, bushings, and automotive parts.

CNC

HDPE

HDPE is a lightweight, impact-resistant thermoplastic, ideal for high-performance components like gears, bushings, seals, and marine or automotive parts due to its low friction and chemical resistance.

CNC

ABS

CNC-milled ABS is strong, impact-resistant, and ideal for prototypes and housings. It machines well, has a matte finish, and is widely used in engineering, electronics, and product design.

CNC

Sheet Metal Forming

Sheet metal forming shapes metal sheets using techniques like bending and stamping. It's used in automotive, aerospace, and electronics for precise, durable parts.

Sheet Metal Forming

Acrylic (PMMA)

CNC-milled acrylic offers high clarity, smooth edges, and a glass-like finish. Ideal for displays, covers, and enclosures, it’s precise, weather-resistant, and suited for low-impact uses.

CNC

Aluminum 6063 (EN AW-6063)

Aluminum 6063 is a medium-strength, heat-treatable alloy with excellent corrosion resistance and good formability. It's ideal for precision parts in architectural, structural, and electronic applications.

CNC

Vacuum Casting Plastics

Vacuum casting is a manufacturing process used to create detailed and precise prototypes or small production runs of plastic and rubber parts.

Vacuum Casting

Polypropylene

Polypropylene (PP) is a lightweight, durable thermoplastic ideal for CNC machined parts requiring chemical resistance, low friction, and fatigue resistance, often used in automotive, medical, and consumer applications.

CNC

Aluminum 5083 (EN AW-5083)

Aluminum 5083 is a corrosion-resistant, high-strength alloy ideal for CNC machined parts in marine, automotive, and aerospace applications.

CNC

Injection Molding Plastics

Injection molding involves injecting molten plastic into a mold, where it cools and solidifies into a precise shape. Ideal for high-volume production, it ensures consistent quality, detailed designs, and material flexibility across various industries.

Injection Molding

Laser Cutting Plastics

Laser cutting is a precise manufacturing process that uses a high-powered laser beam to melt, burn, or vaporize plastics, producing clean edges and accurate cuts across a variety of materials.

Laser Cutting

Nickel Silver C77000 (55-18, CW410J)

Nickel silver C77000 is a copper-nickel-zinc alloy with a white, silver-like appearance. Despite its name, it contains no silver. It is tarnish resistant and has better corrosion resistance than standard brass.

CNC

UHMW-PE

UHMW-PE is a highly durable thermoplastic with exceptional wear resistance, low friction, and chemical resistance, ideal for high-performance parts in machinery, food processing, and industrial applications.

CNC

MJF Flexible TPU

MJF flexible TPU is a rubber-like, tear-resistant material with high rebound and good abrasion resistance that's suited to flexible functional prototypes and wear-prone parts.

MJF

+16

SLS Glass-Filled Nylon PA12

SLS glass-filled nylon PA12 is a stiff, wear-resistant PA12 with higher heat deflection under load than standard nylon, suited to rigid functional parts, though it is less ductile.

SLS

+8

SLS Glass-Filled Polypropylene

SLS glass-filled polypropylene is a stiffer, stronger polypropylene that resists heat much better under load (around 130 °C) than unfilled PP, with good chemical resistance, although it is denser and less ductile.

SLS

Copper Nickel C71500 (70/30, CW354H)

CNC-machined Copper Nickel C71500 (70/30) is a high-strength copper-nickel alloy with excellent seawater corrosion and erosion resistance, suited to faster-flowing and more demanding marine service than 90/10.

CNC

Material Guide for White color

Technology

Category

Manufacturing process

Color (1)

Property

SLS Nylon PA12

PETG

Aluminum (AlSi10Mg)

316L Stainless Steel

ABS

PLA

HP® MJF Nylon PA12

ASA

Tough Resin

Titanium

PLA+ (Tough PLA)

Standard Resin

17-4 PH Stainless Steel

FDM TPU

Aluminum Alloy 6061

MJF Glass-Filled Nylon PA12

High-Detail Resin

Polycarbonate

Carbon Fiber PETG

Translucent Resin

Maraging Steel

Transparent Resin

Carbon Fiber ASA

SLS Flexible TPU

Carbon Fiber FDM Nylon

Elastic Resin

FDM Nylon

Nylon-Like Resin

High-Detail 316L Steel

Sterling Silver

Flexible Resin

Carbon Fiber PLA

PCTG

HP® 3D HR PA 12 S, enabled by Arkema

PC-ABS

FDM TPE

Inconel 718

Plated Brass

Glass Fiber FDM Nylon

Accura® ClearVue

Somos® Evolve

Silicone Rubber

HP® MJF Nylon PA11

High-Temperature Resin

Recycled rPETG

Flame Retardant Polycarbonate

SLS Nylon PA11

SLS Polypropylene

FDM PMMA

Food Safe SLS Nylon PA12

BioMed Resin

Accura® Xtreme

Rigid Resin

Flame Retardant PETG

Castable Resin

SLS Nylon PA 2200

Glass Fiber ASA

FDM Polypropylene

MBJ 316L Steel

Recycled rPLA

Durable Resin

Spectroplast® TrueSil

ULTEM 9085

HIPS

GreenTec Pro

Accura® 25

Somos® GP Plus 14122

PETG-HT

PET

PHA

SLS Nylon PA6

VisiJet® Armor M2G-CL

Somos® PerFORM

Ceramic Resin