Material
ABS Kevlar
ABS Kevlar is ABS reinforced with aramid (Kevlar) fibers for better abrasion resistance and dimensional stability, with strength, stiffness, and heat resistance close to standard ABS, suited to wear-prone parts and fixtures.
Manufacturing processes
FDM
About
ABS Kevlar is ABS reinforced with aramid (Kevlar) fibers, which makers cite for better abrasion resistance, improved dimensional stability, and a slightly lower density than standard ABS.
Its measured strength and stiffness are close to standard ABS, so it is not markedly stiffer or stronger.
ABS Kevlar is well suited to jigs, fixtures, and wear-prone functional parts.
Technical Details
- Accuracy
- ±0.3% (lower limit of ±0.2 mm)
- Density
- 1.04 g/cm³
- Min. wall thickness
- 1 mm
Technical Properties
- Tensile strength
- 28 - 35 MPa
- Tensile modulus
- 1775 - 2350 MPa
- Tensile elongation
- 4.9 - 6%
- Flexural strength
- 44.7 MPa
- Flexural modulus
- 1509 - 2350 MPa
- HDT (0.45 MPa)
- 88°C
- HDT (1.8 MPa)
- 75°C
- Default layer height
- 0.2 mm
- Default infill
- 20%
- Embossing
- min. 0.5 mm
- Engraving
- min. 0.5 mm
- Interlocking parts
- Yes
- Warping risk
- Low
- Maximum printing dimensions
- 601 × 601 × 601 mm