About

Sterling silver is malleable when thin and can be polished for more shine, but with fewer details. It is 3D printed in multiple steps. First, it is 3D printed in a high resolution wax. A mold of liquid plaster is then made using the wax model, and afterwards, that is injection molded.

Technical Details

Accuracy

±5% (lower limit of ±0.4 mm)

Density

10.26 g/cm³

Min. wall thickness

-

Tensile strength

170 - 485 MPa

Tensile modulus

76000 - 83000 MPa

Tensile elongation

2 - 40%

Flexural strength

600 - 900 MPa

Flexural modulus

70000 - 80000 MPa

HDT (0.45 MPa)

250 - 300°C

HDT (1.8 MPa)

200 - 260°C

Default layer height

0.025 mm

Default infill

100%

Embossing

min. 0.4 mm

Engraving

min. 0.4 mm

Interlocking parts

Yes

Warping risk

N/A