Material
Accura® ClearVue
Accura® ClearVue is a clear, transparent resin with low moisture absorption that simulates the appearance of polycarbonate and ABS, suited to lens and headlamp models, fluid-flow visualization, and transparent assemblies.
Manufacturing processes
DLPSLAMSLALCD
About
Accura® ClearVue is a clear, colorless resin with low water absorption.
As produced, parts are clear but show fine layer lines, and near-glass transparency requires finishing. It is hard and fairly strong but brittle, and softens at only about 41–51 °C, so it isn't suited to hot environments or structural loads.
Accura® ClearVue is a good option for headlamp and lens models, fluid-flow visualization, and transparent assemblies.
Technical Details
- Accuracy
- ±0.2% (lower limit of ±0.2 mm)
- Density
- 1.17 g/cm³
- Min. wall thickness
- 0.6 mm
Technical Properties
- Tensile strength
- 41 - 53 MPa
- Tensile modulus
- 2030 - 2640 MPa
- Tensile elongation
- 3 - 15%
- Flexural strength
- 53 - 84 MPa
- Flexural modulus
- 1560 - 2310 MPa
- HDT (0.45 MPa)
- 46 - 51°C
- HDT (1.8 MPa)
- 41 - 50°C
- Default layer height
- 0.1 mm
- Default infill
- 100%
- Embossing
- min. 0.5 mm
- Engraving
- min. 0.5 mm
- Interlocking parts
- Yes
- Warping risk
- Low
- Maximum printing dimensions
- 500 × 500 × 500 mm