Material
High-Temperature Resin
High-temperature resin offers a notably higher heat deflection temperature than standard resin. This makes it a strong choice for heat-resistant mounts, fixtures, and housings that need to hold their shape under sustained heat.
Manufacturing processes
About
High-temperature resin is formulated to withstand significantly more heat than standard resin.
Heat deflection temperature varies meaningfully by formulation and post-curing. Some formulations reach roughly 140 °C with standard post-curing, while more extensively post-cured or higher-performance formulations can exceed 200 °C, with some going well beyond that.
This makes high-temperature resin well suited to parts exposed to hot air, gas, or fluid flow, as well as molds, inserts, and fixtures that need to hold their shape under sustained heat.
Technical Details
- Accuracy
- ±0.2% (lower limit of ±0.2 mm)
- Density
- 1.3 g/cm³
- Min. wall thickness
- 0.6 - 1 mm
Technical Properties
- Tensile strength
- 42.2 - 81 MPa
- Tensile modulus
- 2450 - 4000 MPa
- Tensile elongation
- 2.5 - 3.3%
- Flexural strength
- 140 MPa
- Flexural modulus
- 2620 - 4260 MPa
- HDT (0.45 MPa)
- 99 - 142°C
- Default layer height
- 0.1 mm
- Default infill
- 100%
- Embossing
- min. 0.5 mm
- Engraving
- min. 0.5 mm
- Warping risk
- Yes, for parts over 140mm or parts with thin long structures
- Maximum printing dimensions
- 800 × 800 × 550 mm