Craftcloud offers a wide range of materials, including plastics, metals, and a variety of finishes and colors for each.
73 results
PETG offers good impact resistance and strong layer adhesion, plus reliable chemical and moisture resistance. It is a good choice for everyday functional parts.
ABS is a durable, impact-resistant plastic with good heat tolerance, and is well suited to functional parts and prototypes that need to handle everyday stress.
PLA is a low-cost, rigid plastic with excellent dimensional accuracy, and is a good choice for prototypes and functional parts that do not require strength or heat resistance.
ASA is a durable plastic with outstanding UV and weather resistance, which makes it the top choice for parts exposed to prolonged sunlight and outdoor conditions.
PLA+ and Tough PLA offer enhanced strength and durability compared to regular PLA, which makes them ideal for functional prototypes and mechanical parts.
TPU is a versatile elastomer family that ranges from soft, highly stretchable rubber-like grades to firmer, semi-rigid formulations.
Polycarbonate (PC) is an engineering-grade plastic with the highest heat resistance and impact strength of common FDM materials, and it is ideal for demanding functional parts and prototypes.
Carbon fiber PETG is a reinforced composite that adds significant stiffness and dimensional stability to standard PETG, trading some impact resistance for rigidity. It is ideal for parts that need to hold their shape under load.
Carbon fiber ASA is a reinforced composite that adds stiffness and dimensional stability to standard ASA while retaining its signature UV and weather resistance. It is a strong choice for structural outdoor parts.
Carbon fiber PPA is a high-performance composite that pushes heat resistance and dimensional stability well beyond standard carbon fiber nylon. It is suited to demanding engineering applications exposed to elevated temperatures.
Carbon fiber nylon is a reinforced composite that significantly increases stiffness and heat resistance over standard nylon, trading away some of nylon's signature impact resistance and flexibility in the process.
Wood-filled PLA blends real wood fiber with PLA to create a filament that looks, feels, and can be finished like natural wood, and it is prized for its appearance rather than mechanical strength.
FDM nylon is a tough, wear-resistant engineering plastic known for high impact resistance, low friction, and the ability to flex repeatedly without cracking, all of which make it ideal for functional, moving parts.
Carbon Fiber PLA is a reinforced composite that significantly increases stiffness and dimensional stability over standard PLA, though this comes at the cost of increased brittleness.
PCTG is a tougher, clearer alternative to PETG. It offers notably better impact resistance and moisture resistance while it retains PETG's ease of use and chemical resistance.
Multicolor FDM prints made with two or more PLA filaments offer vibrant, visually striking results. Ideal for decorative or functional parts, these prints combine strong layer adhesion, smooth surfaces, and precise color transitions.
PC-ABS is a polymer blend that combines polycarbonate's heat resistance and toughness with ABS's easier processability and dimensional stability, striking a middle ground between the two.
Glass fiber nylon (PA-GF) adds stiffness, heat resistance, and dimensional stability to nylon at a lower cost than carbon fiber nylon, while retaining significantly better impact resistance and toughness.
FDM TPE is a softer, more rubber-like flexible material than TPU. It offers excellent comfort and stretch for grip and cushioning applications, though with less abrasion, chemical, and heat resistance.
Carbon fiber polycarbonate (PC-CF) adds significant stiffness, heat resistance, and dimensional stability to standard PC.
Carbon fiber PPS is a high-performance composite that offers metal-matching stiffness, exceptional chemical resistance, and inherent flame retardancy, though it's more brittle than tougher engineering plastics like nylon or polycarbonate.
Recycled rPETG reprocesses post-consumer or post-industrial PETG waste into new filament. It offers a sustainable alternative to virgin PETG with comparable strength, toughness, and chemical resistance.
Flame retardant polycarbonate (PC-FR) combines polycarbonate's strength and heat resistance with a UL94 V-0 fire rating. This makes it a strong choice for electrical enclosures and components near heat sources.
FDM PEEK is a premium engineering thermoplastic that combines exceptional heat resistance, strength, and chemical resistance with genuine biocompatibility. It is used where metal replacement or medical-grade performance is required.
PETG-ESD is a PETG modified with carbon nanotubes so static charge drains away gradually, suited to electronics enclosures, jigs, and fixtures.
Polymethyl Methacrylate (PMMA), commonly known as acrylic or plexiglass, offers strong optical clarity and excellent UV resistance, though it's notably more brittle and less impact-resistant than materials like ABS or polycarbonate.
ABS-ESD is an ABS modified with a conductive additive so static charge drains away gradually, suited to electronics enclosures, jigs, and fixtures, though it is less ductile and impact-resistant than standard ABS.
Flame retardant PETG is a halogen-free PETG designed to self-extinguish (to UL 94 V-0 criteria), suited to electronics enclosures and machine parts, though weaker than regular PETG and with a heat deflection of only about 60 °C.
GreenTEC Pro Carbon is a biopolymer made from renewable resources combined with 10% carbon fiber. The material offers high rigidity, very good mechanical properties and an increased temperature resistance.
Recycled rPLA reprocesses post-consumer or post-industrial PLA waste into new filament. It offers a more sustainable alternative to virgin PLA with generally similar, though somewhat more variable, mechanical properties.
Glass fiber ASA is ASA reinforced with chopped glass fiber, giving higher stiffness and about 10 °C more heat deflection than standard ASA while keeping its UV and weather resistance, though it is less ductile.
Polypropylene is a versatile and durable material, highly suitable for compliant and functional parts. The FDM technology provides a cheaper alternative to SLS or MJF printed parts.
ULTEM 1010 offer the highest tensile strength and the highest chemical and thermal resistance of any FDM thermoplastic.
Carbon fiber ABS is ABS reinforced with chopped carbon fiber (typically 10–15%), giving much higher stiffness and slightly better heat resistance than standard ABS, though it is less ductile.
GreenTec Pro is a high performance biodegradable material made from 100% natural resources. With a high heat resistance (up to 160 °C) and mechanical stress resistance, the material is ideal for demanding applications.
Metal-filled PLA is PLA loaded with fine metal powder (about 20–80% by weight), giving heavier, metal-looking parts that can be polished, mainly for decorative pieces, though it is brittle.
HIPS is polystyrene toughened with polybutadiene rubber, a lightweight, easily painted plastic with moderate impact resistance, similar to ABS but less tough.
PETG-HT is an enhanced version of PETG, specifically designed to withstand high temperatures and exhibit excellent mechanical properties.
ULTEM 9085 is a high-performance thermoplastic with excellent chemical resistance and an extreme level of flame retardancy.
Carbon-reinforced PEEK is stiffer and somewhat stronger than normal PEEK, with a much higher heat deflection temperature under load, though it is far less ductile.
Markforged® Onyx is a nylon filled with chopped micro carbon fiber, about 1.4 times stronger and stiffer than ABS, with a heat deflection of 145 °C at light load, suited to functional prototypes and end-use parts.
iglidur® I180-PF by igus is a material with high wear resistance, especially designed for moving parts.
PVB filament is a semi-rigid material that can be smoothed to a glossy, layer-free finish, with low warping, suited to display models and visual prototypes
Conductive PLA is a carbon-filled PLA that conducts electricity well enough for low-voltage, low-current parts such as touch sensors and simple circuits, with a volume resistivity of about 30 Ω·cm along the layers.
iglidur® I150-PF by igus features a high abrasion resistance at low speeds combined with good mechanical properties.
Recycled rASA reprocesses post-consumer or post-industrial ASA waste into new filament. It offers a more sustainable alternative to virgin ASA, though it has a more limited recyclability than PLA, ABS, or PETG.
PHA (Polyhydroxyalkanoate) filament is a biodegradable type of plastic used in 3D printing, made through the fermentation of plant sugars by bacteria. It a great choice for applications that require biodegradability.
PPSU is a heat- and chemical-resistant material suited for automotive, aerospace, and plumbing applications.
Lightweight PLA (LW-PLA) is a specialized 3D printing filament that expands up to three times its volume for lighter prints without losing the strength of standard PLA.
Multicolor FDM prints using ASA combine vibrant color separation with exceptional UV, heat, and weather resistance. Ideal for outdoor signage, automotive parts, and durable prototypes needing both strength and visual impact.
Glass fiber PEEK is PEEK reinforced with glass fiber for better creep resistance, stiffness, and dimensional stability under sustained load at high temperature, with PEEK’s broad chemical resistance, though it is less suited to wear applications.
ABS Kevlar is ABS reinforced with aramid (Kevlar) fibers for better abrasion resistance and dimensional stability, with strength, stiffness, and heat resistance close to standard ABS, suited to wear-prone parts and fixtures.
FDM TPU-ESD is an engineering-grade thermoplastic chosen for its balance of flexibility and protection against electrostatic discharge.
PVA is a water-soluble thermoplastic used primarily as support material in FDM printing. It dissolves cleanly in water, enabling complex geometries, internal channels, and delicate details that would be difficult or impossible with breakaway support.
Glass fiber ULTEM 1010 is ULTEM 1010 polyetherimide reinforced with glass fiber for added stiffness and dimensional stability, built on a resin with a glass transition of about 215 °C.
PET 3D prints offer a strong balance of toughness, chemical resistance, and dimensional stability. The material produces durable parts with good layer adhesion and a semi-gloss surface finish.
Recycled rABS reprocesses post-consumer or post-industrial ABS waste into new filament. It offers a sustainable alternative to virgin ABS with mechanical properties that hold up well through recycling.
Carbon fiber PET is a PET filament reinforced with chopped carbon fiber, offering high stiffness, low moisture absorption, and higher heat deflection than PETG, though it is brittle and weaker across the layers.
PEKK filament is a high-performance thermoplastic from the PAEK family, known for excellent thermal and chemical resistance, and mechanical strength. Ideal for aerospace, automotive, and high-tech industries, it excels in demanding environments.
Carbon-reinforced ULTEM 9085 is a stiffer, stronger version of ULTEM 9085, though it is less ductile and weaker across the layers.
Temperature-based color-changing PLA is ideal for novelty prints.
PLA-ESD is a PLA modified with a conductive additive so static charge drains away gradually, suited to electronics jigs and fixtures.
Carbon-reinforced PEKK is a stiffer version of PEKK with modestly higher strength, though it is less ductile and weaker across the layers.
Multicolor FDM prints using PETG combine vivid color separation with the material's toughness, flexibility, and chemical resistance. It is ideal for functional enclosures and durable prototypes that need both visual impact and everyday resilience.
As-printed multicolor FDM ABS has a ribbed, layered texture. Color regions are generally clean-edged, with minor bleed at color-change points. ABS has a matte look, unlike glossier PETG, and responds well to acetone vapor smoothing.
PC/PTFE is an advanced polycarbonate composite enriched with PTFE (Teflon). It offers high mechanical strength and exceptional abrasion resistance with low friction, making it ideal for industrial parts.
PEBA is a high-performance flexible material that combines the strength of nylon with the elasticity of rubber. It is characterized by its ultra-lightweight structure and a "high rebound" effect, delivering up to 85% energy return for dynamic parts.
iglidur® I190-PF is a material that offers high-strength and wear-resistance for low-friction, dry-running parts. It is deal for bushings, gliding elements, and motion components in automation and machinery.
Markforged® Inconel 625 is a nickel-chromium superalloy with high corrosion resistance and strength at high temperatures, suited to high-temperature fixtures and corrosion-resistant fittings.
PVC filament is renowned for its exceptional durability and resistance to moisture. Its versatility and robustness make it a favored option for creating functional prototypes, outdoor signage, and parts that require water-resistant properties.
Markforged® H13 is a hot-work tool steel that is suited to tool bodies, brazing fixtures, and mold inserts, though about 94.5% dense and less ductile than wrought H13.
Ultrafuse 316L produces sintered 316L stainless steel parts with high ductility and corrosion resistance, similar in strength to annealed wrought 316L, though with lower yield strength than laser-melted 316L.
Ultrafuse 17-4 PH produces sintered 17-4 PH stainless steel parts that are strong, magnetic, and corrosion resistant, and can be heat treated to higher strength, though with lower ductility than other metal 3D printing processes.