Material
BioMed Resin
BioMed resin is a biocompatible photopolymer certified under ISO 10993 for medical device applications, with specific contact type and duration varying by exact formulation.
Manufacturing processes
About
BioMed resin refers to a family of biocompatible photopolymers formulated and certified under ISO 10993 for use in medical devices, surgical guides, and healthcare components.
Certification specifics – including contact type (skin, mucosal membrane, bone, or tissue), permitted contact duration (ranging from short-term to long-term depending on the formulation), and validated sterilization or disinfection methods – vary between specific products. Mechanical properties also range from rigid, high-stiffness formulations to flexible, elastomeric ones.
BioMed resin suits surgical guides, medical device components, and healthcare or dental applications requiring documented biocompatibility.
Technical Details
- Accuracy
- ±0.4% (lower limit of ±0.4 mm)
- Density
- 1.2 g/cm³
- Min. wall thickness
- 0.6 mm
Technical Properties
- Tensile strength
- 52 - 73 MPa
- Tensile modulus
- 2080 - 3100 MPa
- Tensile elongation
- 3 - 12.3%
- Flexural strength
- 84 - 112 MPa
- Flexural modulus
- 2300 - 3300 MPa
- HDT (0.45 MPa)
- 67 - 119°C
- HDT (1.8 MPa)
- 54 - 94°C
- Default layer height
- 0.05 mm
- Default infill
- 100%
- Embossing
- min. 0.1 mm
- Engraving
- min. 0.4 mm
- Interlocking parts
- Yes
- Warping risk
- Moderate
- Maximum printing dimensions
- 345 × 190 × 345 mm