Material

Metal-Filled PLA

Metal-filled PLA is PLA loaded with fine metal powder (about 20–80% by weight), giving heavier, metal-looking parts that can be polished, mainly for decorative pieces, though it is brittle.

Manufacturing processes

FDM 

About

Metal-filled PLA is PLA loaded with fine metal powder (bronze, copper, brass, steel, or iron), anywhere from about 20% to 80% by weight depending on the filament.

More metal makes parts heavier, more metal-like when polished, and more brittle; the addition doesn't provide more strength. The polymer still dominates: Parts soften near 55 °C, aren’t conductive, and can’t be sintered into solid metal.

Metal-filled PLA is a good option for decorative models, props, and display pieces.

Technical Details

Accuracy
±0.3% (lower limit of ±0.2 mm)
Density
1.85 g/cm³
Min. wall thickness
1 mm

Technical Properties

Tensile strength
25 - 45 MPa
Tensile modulus
2000 - 3500 MPa
Tensile elongation
1 - 3%
Flexural strength
35 - 60 MPa
Flexural modulus
2000 - 3500 MPa
HDT (0.45 MPa)
55 - 60°C
Default layer height
0.2 mm
Default infill
20%
Embossing
min. 0.4 mm
Engraving
min. 0.4 mm
Interlocking parts
Yes
Warping risk
Low
Maximum printing dimensions
601 × 601 × 601 mm

Finishes

  • 40% Bronze-Filled PLA
  • 80% Bronze-Filled PLA
  • 80% Copper-Filled PLA
  • 40% Iron-Filled PLA

Properties

  • Visual

Colors