Material

LithaLox HP 500 Al2O3

ithaLox HP 500 is a high-purity (99.99%) alumina ceramic with 99.4% relative density, a four-point bending strength of 430 MPa, and a smooth surface.

Manufacturing processes

LCM 

About

Alumina (Al2O3) is one of the most important oxide ceramics, with high hardness and corrosion and temperature resistance.

LithaLox HP 500 components are electrically insulating, which suits substrates and resistor cores in electronics, wear-protection tiles, ballistics, and thread guides in textile engineering.

LithaLox HP 500 is a good option for precision insulating and wear-resistant ceramic parts.

Technical Details

Accuracy
±0.2% (lower limit of ±0.2 mm)
Density
3.98 g/cm³
Min. wall thickness
-

Technical Properties

Default layer height
0.025 mm
Default infill
100%
Interlocking parts
Yes
Warping risk
Yes, for parts over 140mm or parts with thin long structures
Maximum printing dimensions
285 × 155 × 270 mm

Finishes

  • Standard Sintered

Properties

  • Heat resistant
  • Biomedical
  • Smooth
  • Functional
  • Wear resistant
  • Water resistant

Colors