Material
Recycled rASA
Recycled rASA reprocesses post-consumer or post-industrial ASA waste into new filament. It offers a more sustainable alternative to virgin ASA, though it has a more limited recyclability than PLA, ABS, or PETG.
Manufacturing processes
About
Recycled rASA is made by reprocessing post-consumer or post-industrial ASA waste, reducing the need for new raw material and reducing waste. ASA is less commonly recycled than PLA, ABS, or PETG.
It generally retains ASA's core strength: UV and weather resistance, holding up in outdoor conditions that would degrade standard ABS.
As with other recycled filaments, batch-to-batch color can vary since different sources are often mixed together.
Recycled rASA suits outdoor enclosures, automotive exterior parts, and garden or furniture components where standard ASA would normally be used.
Technical Details
- Accuracy
- ±0.3% (lower limit of ±0.2 mm)
- Density
- 1.1 g/cm³
- Min. wall thickness
- 1 mm
Technical Properties
- Tensile strength
- 32 - 49 MPa
- Tensile modulus
- 1726 - 2379 MPa
- Tensile elongation
- 2.5 - 9%
- Flexural strength
- 60 - 78 MPa
- Flexural modulus
- 1814 - 3200 MPa
- HDT (0.45 MPa)
- 96 - 102°C
- Default layer height
- 0.2 mm
- Default infill
- 20%
- Embossing
- min. 0.4 mm
- Engraving
- min. 0.4 mm
- Warping risk
- N/A
- Maximum printing dimensions
- 500 × 500 × 700 mm