Craftcloud offers a wide range of materials, including plastics, metals, and a variety of finishes and colors for each.
27 results
Carbon fiber PETG is a reinforced composite that adds significant stiffness and dimensional stability to standard PETG, trading some impact resistance for rigidity. It is ideal for parts that need to hold their shape under load.
Carbon fiber ASA is a reinforced composite that adds stiffness and dimensional stability to standard ASA while retaining its signature UV and weather resistance. It is a strong choice for structural outdoor parts.
Carbon fiber PPA is a high-performance composite that pushes heat resistance and dimensional stability well beyond standard carbon fiber nylon. It is suited to demanding engineering applications exposed to elevated temperatures.
Carbon fiber nylon is a reinforced composite that significantly increases stiffness and heat resistance over standard nylon, trading away some of nylon's signature impact resistance and flexibility in the process.
Carbon Fiber PLA is a reinforced composite that significantly increases stiffness and dimensional stability over standard PLA, though this comes at the cost of increased brittleness.
PC-ABS is a polymer blend that combines polycarbonate's heat resistance and toughness with ABS's easier processability and dimensional stability, striking a middle ground between the two.
Carbon fiber polycarbonate (PC-CF) adds significant stiffness, heat resistance, and dimensional stability to standard PC.
GreenTEC Pro Carbon is a biopolymer made from renewable resources combined with 10% carbon fiber. The material offers high rigidity, very good mechanical properties and an increased temperature resistance.
Glass fiber ASA is ASA reinforced with chopped glass fiber, giving higher stiffness and about 10 °C more heat deflection than standard ASA while keeping its UV and weather resistance, though it is less ductile.
Carbon fiber ABS is ABS reinforced with chopped carbon fiber (typically 10–15%), giving much higher stiffness and slightly better heat resistance than standard ABS, though it is less ductile.
Carbon-reinforced PEEK is stiffer and somewhat stronger than normal PEEK, with a much higher heat deflection temperature under load, though it is far less ductile.
Markforged® Onyx is a nylon filled with chopped micro carbon fiber, about 1.4 times stronger and stiffer than ABS, with a heat deflection of 145 °C at light load, suited to functional prototypes and end-use parts.
Glass fiber PEEK is PEEK reinforced with glass fiber for better creep resistance, stiffness, and dimensional stability under sustained load at high temperature, with PEEK’s broad chemical resistance, though it is less suited to wear applications.
SLS PA11 carbon fiber is a stiff, lightweight nylon composite with much higher stiffness and heat resistance under load than standard PA11. It is best used for rigid parts, though with less ductility.
PA12 CCF is a is a co-extruded material consisting of nylon PA12 with a composite of nylon and continuous carbon fibers. This unique combination gives the finished part a smooth surface along with high strength, toughness, and durability.
Alumide is an aluminum-filled nylon 12 with a metallic gray look, high stiffness, and heat deflection around 144 °C under load, suited to rigid parts, jigs, and models, though it is less flexible than standard nylon.
Glass-filled polypropylene is a tough material with high strength that is also resistant to high temperatures. It is suitable for functional verification of product prototypes.
Glass fiber ULTEM 1010 is ULTEM 1010 polyetherimide reinforced with glass fiber for added stiffness and dimensional stability, built on a resin with a glass transition of about 215 °C.
Carbon fiber PET is a PET filament reinforced with chopped carbon fiber, offering high stiffness, low moisture absorption, and higher heat deflection than PETG, though it is brittle and weaker across the layers.
SLS PEKK-CF is a carbon-fiber-reinforced PEKK that is very stiff and holds its shape under load up to roughly 200 °C. It is a good option for rigid high-temperature parts, though it is brittle and weaker across the layers.
Carbon-reinforced ULTEM 9085 is a stiffer, stronger version of ULTEM 9085, though it is less ductile and weaker across the layers.
Carbon-reinforced PEKK is a stiffer version of PEKK with modestly higher strength, though it is less ductile and weaker across the layers.
Garolite G11 produces high-strength, flame-retardant composite parts with excellent thermal stability, electrical insulation, and dimensional accuracy.
Garolite G10 FR4 produces strong, lightweight, and electrically insulating parts with excellent dimensional stability, moisture resistance, and flame retardancy.
Garolite G10 produces strong, lightweight composite parts with excellent dimensional stability, mechanical strength, and electrical insulation.
PA12 CBF is a co-extruded material consisting of nylon PA12 with a composite of nylon and continuous basalt fibers. This unique combination gives the finished part a smooth surface along with strength, toughness, and durability.
PETG CCF is a clear PETG shell with a PETG and continuous carbon fiber composite inside. This unique combination results in a part with a much higher tensile strength than PETG alone with a smooth translucent finish.