Craftcloud offers a wide range of materials, including plastics, metals, and a variety of finishes and colors for each.
109 results
Nylon PA12 is one of the most widely used SLS materials. It is a tough, versatile plastic with low moisture absorption and good chemical resistance for durable functional parts.
316L Stainless Steel is a highly durable alloy known for its corrosion resistance and versatility in both industrial and aesthetic applications.
AlSi10Mg is a lightweight cast-type aluminum alloy with high as-built strength and good thermal and electrical conductivity, suited to functional metal parts, with strength and ductility depending on heat treatment.
Developed by HP, MJF Nylon is a widely used material for strong and detailed end-use parts and prototypes.
The strongest 3D printable material, titanium offers good dimensional accuracy and fine details.
Polycarbonate (PC) is an engineering-grade plastic with the highest heat resistance and impact strength of common FDM materials, and it is ideal for demanding functional parts and prototypes.
MJF glass-filled nylon PA12 is a stiff PA12 with the same properties in every direction and higher heat deflection under load than standard nylon. It is a good choice for rigid functional parts.
Carbon fiber PPA is a high-performance composite that pushes heat resistance and dimensional stability well beyond standard carbon fiber nylon. It is suited to demanding engineering applications exposed to elevated temperatures.
Carbon fiber nylon is a reinforced composite that significantly increases stiffness and heat resistance over standard nylon, trading away some of nylon's signature impact resistance and flexibility in the process.
High-detail 316L Stainless Steel is 316L built with finer layers, which allows for thinner walls (about 0.5 mm) and smaller features than standard 316L, with similar strength and high ductility.
FDM nylon is a tough, wear-resistant engineering plastic known for high impact resistance, low friction, and the ability to flex repeatedly without cracking, all of which make it ideal for functional, moving parts.
Inconel 718 is a precipitation-hardening nickel-chromium superalloy with high strength, creep resistance, and fatigue strength at temperatures up to about 700 °C.
HP® 3D HR PA 12 S delivers exceptional surface quality and precision right out of the printer. The material is perfect for functional prototypes and high-end consumer goods.
PC-ABS is a polymer blend that combines polycarbonate's heat resistance and toughness with ABS's easier processability and dimensional stability, striking a middle ground between the two.
Glass fiber nylon (PA-GF) adds stiffness, heat resistance, and dimensional stability to nylon at a lower cost than carbon fiber nylon, while retaining significantly better impact resistance and toughness.
Multi Jet Fusion PA11, produced by HP, is a bio-derived powder with exceptionally high toughness. This material offers high ductility and impact strength for all applications, especially functional parts.
Nylon PA11 is a bio-based nylon, made from castor oil, with high ductility and impact resistance. It is suitable for durable functional parts that need to flex or absorb impact.
Carbon fiber PPS is a high-performance composite that offers metal-matching stiffness, exceptional chemical resistance, and inherent flame retardancy, though it's more brittle than tougher engineering plastics like nylon or polycarbonate.
High-temperature resin offers a notably higher heat deflection temperature than standard resin. This makes it a strong choice for heat-resistant mounts, fixtures, and housings that need to hold their shape under sustained heat.
Flame retardant polycarbonate (PC-FR) combines polycarbonate's strength and heat resistance with a UL94 V-0 fire rating. This makes it a strong choice for electrical enclosures and components near heat sources.
FDM PEEK is a premium engineering thermoplastic that combines exceptional heat resistance, strength, and chemical resistance with genuine biocompatibility. It is used where metal replacement or medical-grade performance is required.
Silicone resin produces soft, flexible parts with rubber-like elasticity and durability. It offers moderate rebound, fine detail resolution, and reliable performance for seals, gaskets, and functional flexible prototypes.
SLS food safe nylon PA12 is a durable, chemical-resistant nylon made from a powder grade certified for food contact, suited to tools and components used in food processing.
Flame retardant PETG is a halogen-free PETG designed to self-extinguish (to UL 94 V-0 criteria), suited to electronics enclosures and machine parts, though weaker than regular PETG and with a heat deflection of only about 60 °C.
GreenTEC Pro Carbon is a biopolymer made from renewable resources combined with 10% carbon fiber. The material offers high rigidity, very good mechanical properties and an increased temperature resistance.
Metal binder jetted 316L Stainless Steel is sintered to 96–99% density with ductility like conventional 316L, but its yield strength is well below laser-melted 316L.
ULTEM 1010 offer the highest tensile strength and the highest chemical and thermal resistance of any FDM thermoplastic.
SLS glass-filled nylon PA12 is a stiff, wear-resistant PA12 with higher heat deflection under load than standard nylon, suited to rigid functional parts, though it is less ductile.
GreenTec Pro is a high performance biodegradable material made from 100% natural resources. With a high heat resistance (up to 160 °C) and mechanical stress resistance, the material is ideal for demanding applications.
Copper is a base metal with very high electrical and thermal conductivity, good ductility, and naturally antimicrobial surfaces, suited to heat-management parts, coils, and electrical components.
Figure 4® HI TEMP 300-AMB is a rigid, translucent amber resin with a heat deflection temperature above 300 °C even under higher load, suited to testing high-temperature parts, molds, and flow visualization, though it is brittle.
Flame retardant resin is a photopolymer that self-extinguishes rather than sustaining flame, which makes it a strong choice for electronics and industrial parts near heat or ignition sources.
PETG-HT is an enhanced version of PETG, specifically designed to withstand high temperatures and exhibit excellent mechanical properties.
ULTEM 9085 is a high-performance thermoplastic with excellent chemical resistance and an extreme level of flame retardancy.
Carbon-reinforced PEEK is stiffer and somewhat stronger than normal PEEK, with a much higher heat deflection temperature under load, though it is far less ductile.
Nylon PA6 is a stiff, heat-resistant nylon that is stronger than PA12 when dry. It is sutiable for rigid functional parts, though it absorbs more moisture and is less flexible.
Markforged® Onyx is a nylon filled with chopped micro carbon fiber, about 1.4 times stronger and stiffer than ABS, with a heat deflection of 145 °C at light load, suited to functional prototypes and end-use parts.
Ceramic resin is a high-resolution photopolymer that produces rigid parts with excellent stiffness, heat resistance, and dimensional accuracy.
Somos® PerFORM is a white, ceramic-filled composite resin that is very stiff and heat resistant (up to about 268 °C), suited to tooling, wind tunnel models, and high-temperature testing, though it is brittle.
SLS PEEK is a high-performance thermoplastic that offers high tensile strength, good heat resistance, and broad chemical resistance in a lightweight part, if with low ductility.
iglidur® I180-PF by igus is a material with high wear resistance, especially designed for moving parts.
TrueSil is a pure silicone that offers high flexibility, biocompatibility, and durability. It is ideal for seals, wearables, and medical parts, since it resists heat, UV, and repeated deformation.
PPSU is a heat- and chemical-resistant material suited for automotive, aerospace, and plumbing applications.
Multicolor FDM prints using ASA combine vibrant color separation with exceptional UV, heat, and weather resistance. Ideal for outdoor signage, automotive parts, and durable prototypes needing both strength and visual impact.
Glass fiber PEEK is PEEK reinforced with glass fiber for better creep resistance, stiffness, and dimensional stability under sustained load at high temperature, with PEEK’s broad chemical resistance, though it is less suited to wear applications.
PC-like resin is a highly rigid photopolymer that simulates polycarbonate's stiffness and heat resistance, though it's more brittle than ABS-like resin, which makes it better suited to precision, load-bearing parts than parts needing to absorb impact.
SLS PA11 carbon fiber is a stiff, lightweight nylon composite with much higher stiffness and heat resistance under load than standard PA11. It is best used for rigid parts, though with less ductility.
A great material for striking visual models.
Nylon PA66 is a strong, stiff nylon with good chemical resistance and heat tolerance, well above PA12 in strength and stiffness, though it absorbs far more moisture.
SLS glass-filled nylon PA6 is a very stiff nylon composite with high heat deflection (about 200 °C under load). It's a good choice for rigid, heat-exposed functional parts, though the material is not flexible and still absorbs moisture.
Alumide is an aluminum-filled nylon 12 with a metallic gray look, high stiffness, and heat deflection around 144 °C under load, suited to rigid parts, jigs, and models, though it is less flexible than standard nylon.
Glass-filled polypropylene is a tough material with high strength that is also resistant to high temperatures. It is suitable for functional verification of product prototypes.
Glass fiber ULTEM 1010 is ULTEM 1010 polyetherimide reinforced with glass fiber for added stiffness and dimensional stability, built on a resin with a glass transition of about 215 °C.
SLS PK is a tough, ductile polyketone with excellent chemical and fuel resistance, very low moisture absorption, and low friction and wear, suited to functional parts exposed to fluids, though it is somewhat less stiff than PA12.
SLS PEKK-CF is a carbon-fiber-reinforced PEKK that is very stiff and holds its shape under load up to roughly 200 °C. It is a good option for rigid high-temperature parts, though it is brittle and weaker across the layers.
PEKK filament is a high-performance thermoplastic from the PAEK family, known for excellent thermal and chemical resistance, and mechanical strength. Ideal for aerospace, automotive, and high-tech industries, it excels in demanding environments.
Carbon-reinforced ULTEM 9085 is a stiffer, stronger version of ULTEM 9085, though it is less ductile and weaker across the layers.
Titanium Grade 23 (ELI) offers exceptional biocompatibility, high strength-to-weight ratio, and excellent corrosion resistance.
Inkbit® Titan Tough Epoxy is a type of high-performance material known for its exceptional strength, durability, and resistance to harsh environmental conditions.
Food safe 316L Stainless Steel is a low-carbon austenitic stainless steel with excellent corrosion resistance and higher yield strength than conventionally made 316L, offered with food-contact documentation, suited to food-processing parts.
Carbon-reinforced PEKK is a stiffer version of PEKK with modestly higher strength, though it is less ductile and weaker across the layers.
ithaLox HP 500 is a high-purity (99.99%) alumina ceramic with 99.4% relative density, a four-point bending strength of 430 MPa, and a smooth surface.
PC/PTFE is an advanced polycarbonate composite enriched with PTFE (Teflon). It offers high mechanical strength and exceptional abrasion resistance with low friction, making it ideal for industrial parts.
SLS food safe metal detectable nylon PA12 is a blue, food-contact-certified PA12 that contains metal particles, so stray fragments can be caught by metal detectors and X-ray inspection on food production lines.
Food safe aluminum (AlSi10Mg) is a lightweight alloy with good thermal conductivity and high as-built strength, supplied with a food-contact coating, suited to food-processing parts that avoid acidic or salty foods.
Food safe titanium (Ti-6Al-4V) is a lightweight, non-magnetic, corrosion-resistant alloy with high strength, offered with food-contact documentation, suited to food-processing parts that need strength at moderate temperatures.
Flame retardant SLS nylon PA12 is PA12 formulated to self-extinguish, with fire ratings such as UL 94 V-0 that depend on wall thickness, suited to electrical and transport components, though it is less ductile than standard PA12.
Markforged® copper is a 99.8% pure copper with 84% IACS electrical conductivity and 350 W/m·K thermal conductivity. It is soft and ductile, and is suited to heat sinks, bus bars, and induction coils.
Markforged® Inconel 625 is a nickel-chromium superalloy with high corrosion resistance and strength at high temperatures, suited to high-temperature fixtures and corrosion-resistant fittings.
Aluminum 6061 is a strong, lightweight alloy with excellent corrosion resistance and good machinability. Ideal for aerospace, automotive, and general-purpose CNC-milled parts.
Stainless steel 316L offers excellent corrosion resistance, especially in marine or chemical settings. It’s strong, weldable, and ideal for medical, food-grade, and industrial CNC-milled parts.
Stainless Steel 304 is strong, corrosion-resistant, and ideal for precise CNC-milled parts in automotive, aerospace, and industrial use. It offers excellent durability and dimensional stability.
Carbon Steel C45 is a medium-carbon, non-alloy steel with moderate strength, higher than that of lower-carbon grades. It is commonly used for shafts, axles, spindles, studs and general engineering components.
Acetal (POM-C) is a high-performance copolymer known for its excellent machinability, dimensional stability, and low friction. Ideal for precision parts like gears and bearings, it offers high strength and moisture resistance.
Carbon Steel A36 is a low-cost, structural steel with good strength and weldability. Ideal for frames, brackets, and general-purpose parts. It offers low corrosion resistance and moderate machinability.
PTFE (Teflon) is a chemically resistant material with excellent low friction, ideal for seals, bearings, gaskets, and components in food, pharmaceutical, and industrial applications.
PEEK is a high-strength, heat-resistant thermoplastic with exceptional chemical resistance, wear resistance, and dimensional stability. Ideal for high-performance components in aerospace, automotive, and medical industries.
Nylon PA6 is a durable, wear-resistant thermoplastic with excellent impact strength, low friction, and good machinability. Ideal for precision mechanical components like gears, bushings, and automotive parts.
PEEK GF30 produces extremely strong, stiff, and heat-resistant parts with excellent dimensional stability and chemical resistance, ideal for high-performance structural applications.
Copper CuCr1Zr is a high-performance copper alloy with superior thermal/electrical conductivity, strength, and high-temperature softening resistance. Ideal for welding electrodes, heat sinks, and rocket components.
9-4 Aluminum Bronze is a strong, wear-resistant copper alloy with excellent corrosion resistance. Ideal for bushings, bearings, gears, and valve components in demanding environments.
Nickel Alloy 2.4889 (Alloy 45TM) is a nickel-chromium-iron-silicon alloy designed for high-temperature oxidizing, carburizing, and sulfur-bearing atmospheres, resisting scaling up to about 1,000 °C.
Nickel-Iron Alloy 2.4610 (Alloy C-4) is a nickel-molybdenum-chromium alloy with high pitting resistance and very good resistance to hydrochloric acid. It stays ductile and corrosion resistant after prolonged heating and welding.
Nickel Alloy 2.4816 (Alloy 600) is a nickel-chromium-iron alloy that resists chlorides, oxidation, and hot alkalis, keeping good properties from low to elevated temperatures.
Nickel Alloy 2.4856 (Alloy 625) is a high-strength nickel-chromium-molybdenum-niobium alloy with excellent resistance to pitting, crevice corrosion, and chloride stress corrosion cracking, from cryogenic temperatures to about 980 °C.
Nickel Alloy 2.4851 (Alloy 601) is a nickel-chromium-iron alloy with added aluminum for outstanding oxidation resistance up to about 1,200 °C and good resistance to carburizing conditions.
MoldJet® 316L Stainless Steel is a 316L from a sinter-based process that reaches about 99.9% relative density, with near-isotropic tensile strength and high ductility, suited to corrosion-resistant parts.
Nickel Alloy 2.4633 (Alloy 602 CA) is a high-carbon nickel-chromium-iron-aluminum alloy with outstanding creep strength and oxidation resistance at temperatures up to about 1,200 °C.
Markforged® H13 is a hot-work tool steel that is suited to tool bodies, brazing fixtures, and mold inserts, though about 94.5% dense and less ductile than wrought H13.
Figure 4® High Temp 150 °C FR Black is a rigid, halogen-free, flame-retardant black resin rated UL 94 V-0 at 2 and 3 mm, with a heat deflection of 150 °C under light load, suited to electrical housings and transport parts, though brittle.
BASF® Ultracur3D® RG 3280 is a ceramic-filled resin designed for functional 3D printing. It offers high stiffness, excellent heat resistance, and a smooth white finish, which makes it ideal for durable prototypes and demanding end-use parts.
SLS PA11 ESD is a bio-based, castor-oil nylon with much lower surface resistance than standard PA11. It dissipates static charge from tools, jigs, and housings used around sensitive electronics.
ULTEM 2300 produces high-strength, heat-resistant parts with excellent stiffness, dimensional stability, and flame resistance. It is ideal for structural and high-performance engineering applications.
PEI ULTEM 1000 is a high-strength, heat-resistant thermoplastic ideal for aerospace, automotive, and industrial applications. It offers excellent flame resistance, mechanical properties, and dimensional stability.
Copper C150 is a zirconium copper alloy that retains nearly all of pure copper's exceptional electrical conductivity while offering improved strength and resistance to softening at elevated temperatures.
VisiJet® M2S-HT90 is a strong and rigid material for applications requiring temperature resistance and/or rigidity, ideal for rapid tooling, under the hood parts, enclosures and housings
Ultrafuse 17-4 PH produces sintered 17-4 PH stainless steel parts that are strong, magnetic, and corrosion resistant, and can be heat treated to higher strength, though with lower ductility than other metal 3D printing processes.
Tool steel M42 ships annealed for machining and is hardened afterward into a cobalt-enhanced high-speed steel reaching higher hardness than standard M2, suited to the most demanding cutting applications despite being more brittle and costly.
Tool steel H13 ships annealed and machinable, and can then be air-hardened into a chromium-molybdenum hot-work tool steel valued for strength at elevated temperature, good toughness, and resistance to heat-cracking and thermal fatigue.
Tool steel M2 ships in a soft, machinable annealed state and can be hardened and tempered afterward to become the industry-standard high-speed steel, balancing wear resistance, toughness, and red-hardness.
Acetal (glass-filled) is a reinforced engineering thermoplastic enhanced with glass fibers. This addition significantly increases the material's stiffness, creep resistance, and dimensional stability compared to standard acetal.
Stainless steel 444 is a molybdenum-added ferritic alloy with corrosion resistance approaching 316L, and it's essentially immune to chloride stress corrosion cracking.
Stainless steel 321 is a titanium-stabilized austenitic alloy that is engineered to resist intergranular corrosion during welding and sustained high-temperature service.
Stainless steel 309S is a high-chromium, high-nickel austenitic alloy built for sustained oxidation resistance at elevated temperatures, well beyond standard stainless steel 304 or 316L.
Stainless Steel 409 is a low-cost, titanium-stabilized ferritic alloy built for heat and exhaust-gas resistance, not for decorative or highly corrosive applications.
Stainless steel 310S is a high-chromium, high-nickel austenitic alloy that offers the strongest oxidation resistance of this group, suited to continuous service near 1,100 °C.
SLS glass-filled polypropylene is a stiffer, stronger polypropylene that resists heat much better under load (around 130 °C) than unfilled PP, with good chemical resistance, although it is denser and less ductile.
Aluminum 5083 is a corrosion-resistant, high-strength alloy ideal for CNC machined parts in marine, automotive, and aerospace applications.
CNC-machined Alloy Steel 12Cr1MoV is a low-alloy chromium-molybdenum-vanadium heat-resistant steel with good creep strength and weldability.