“Our mission for Craftcloud® is to bring best value for money to our customers, paired with highest ease of use.”
iglidur® I180-PF
FDM
iglidur I180-PF by igus is a material with high wear resistance, especially designed for moving parts.
About
iglidur I180-PF has been specifically developed for moving applications and is very well suited for abrasion-resistant parts, such as plain bearings, gears, and drive nuts. The higher wear resistance as well as a higher temperature resistance (100 °C long-term) extend the field of application, especially for more dynamic and wear-resistant applications.
Technical Details
- Accuracy
- ±0.2% (lower limit of ±0.2 mm)
- Density
- 1.21 g/cm³
- Min. wall thickness
- 1 mm
Technical Properties
- Tensile strength
- 44 - 50 MPa
- Tensile modulus
- 1000 - 1200 MPa
- Tensile elongation
- 5 - 10%
- Flexural strength
- 33 - 44 MPa
- Flexural modulus
- 1000 - 1200 MPa
- Default layer height
- 0.2 mm
- Default infill
- 20%
- Embossing
- min. 0.5 mm
- Engraving
- min. 0.5 mm
- Interlocking parts
- Yes
- Warping risk
- Yes, for parts over 140mm or parts with thin long structures
- Maximum printing dimensions
- 601 × 601 × 601 mm