Craftcloud offers a wide range of materials, including plastics, metals, and a variety of finishes and colors for each.
68 results
Nylon PA12 is one of the most widely used SLS materials. It is a tough, versatile plastic with low moisture absorption and good chemical resistance for durable functional parts.
PETG offers good impact resistance and strong layer adhesion, plus reliable chemical and moisture resistance. It is a good choice for everyday functional parts.
ABS is a durable, impact-resistant plastic with good heat tolerance, and is well suited to functional parts and prototypes that need to handle everyday stress.
Developed by HP, MJF Nylon is a widely used material for strong and detailed end-use parts and prototypes.
PLA is a low-cost, rigid plastic with excellent dimensional accuracy, and is a good choice for prototypes and functional parts that do not require strength or heat resistance.
ASA is a durable plastic with outstanding UV and weather resistance, which makes it the top choice for parts exposed to prolonged sunlight and outdoor conditions.
Tough resin is an impact-modified photopolymer that trades some of standard resin's stiffness for significantly better elongation and impact resistance. This makes it better suited to functional parts that need to withstand stress without cracking.
PLA+ and Tough PLA offer enhanced strength and durability compared to regular PLA, which makes them ideal for functional prototypes and mechanical parts.
Aluminum Alloy 6061 offers excellent strength-to-weight performance, good corrosion resistance, and reliable dimensional stability. It is ideal for lightweight structural parts, prototypes, and functional components requiring durability and machinability.
Standard resin is a general-purpose photopolymer optimized for fine detail and a smooth surface finish. It offers good rigidity but limited impact resistance, making it suitable for visual models and detailed prototypes, rather than functional parts.
TPU is a versatile elastomer family that ranges from soft, highly stretchable rubber-like grades to firmer, semi-rigid formulations.
High-detail resin is a photopolymer formulated to minimize shrinkage and maximize edge sharpness and surface resolution, capturing extremely fine features like engraved text and fabric texture that other materials can't reproduce as reliably.
Polycarbonate (PC) is an engineering-grade plastic with the highest heat resistance and impact strength of common FDM materials, and it is ideal for demanding functional parts and prototypes.
MJF glass-filled nylon PA12 is a stiff PA12 with the same properties in every direction and higher heat deflection under load than standard nylon. It is a good choice for rigid functional parts.
Translucent resin allows light to pass through with a soft, diffused effect rather than true see-through clarity. This makes it the practical choice when frosted light diffusion is the goal rather than optical clarity.
Carbon fiber ASA is a reinforced composite that adds stiffness and dimensional stability to standard ASA while retaining its signature UV and weather resistance. It is a strong choice for structural outdoor parts.
SLS flexible TPU is a rubber-like, tear-resistant material with very good shock absorption and abrasion resistance. It's suitable for flexible functional prototypes and wear-prone parts.
Elastic resin (Shore 50A–65A) is a soft, rubber-like photopolymer with high elongation and good rebound, ideal for prototyping silicone-like parts that need to stretch, compress, and flex repeatedly.
Brass is a copper-zinc-tin alloy (80% copper, 15% zinc, 5% tin) with a warm gold-like color and fine detail, suited to jewelry, miniatures, and prototypes, though it tarnishes over time.
Flexible resin (Shore 80A) is a soft-touch, rubber-like photopolymer similar in firmness to a shoe heel. It combines flexibility with more rigidity and detail retention than elastic resin.
Wood-filled PLA blends real wood fiber with PLA to create a filament that looks, feels, and can be finished like natural wood, and it is prized for its appearance rather than mechanical strength.
FDM nylon is a tough, wear-resistant engineering plastic known for high impact resistance, low friction, and the ability to flex repeatedly without cracking, all of which make it ideal for functional, moving parts.
PCTG is a tougher, clearer alternative to PETG. It offers notably better impact resistance and moisture resistance while it retains PETG's ease of use and chemical resistance.
HP® 3D HR PA 12 S delivers exceptional surface quality and precision right out of the printer. The material is perfect for functional prototypes and high-end consumer goods.
Accura® ClearVue is a clear, transparent resin with low moisture absorption that simulates the appearance of polycarbonate and ABS, suited to lens and headlamp models, fluid-flow visualization, and transparent assemblies.
FDM TPE is a softer, more rubber-like flexible material than TPU. It offers excellent comfort and stretch for grip and cushioning applications, though with less abrasion, chemical, and heat resistance.
Multi Jet Fusion PA11, produced by HP, is a bio-derived powder with exceptionally high toughness. This material offers high ductility and impact strength for all applications, especially functional parts.
Plated brass is lost wax cast brass with a tin-rhodium underplate and a thin gold or rhodium plating, nickel-free and suited to occasional-wear jewelry, though the plating wears through over time.
Nylon PA11 is a bio-based nylon, made from castor oil, with high ductility and impact resistance. It is suitable for durable functional parts that need to flex or absorb impact.
High-temperature resin offers a notably higher heat deflection temperature than standard resin. This makes it a strong choice for heat-resistant mounts, fixtures, and housings that need to hold their shape under sustained heat.
Recycled rPETG reprocesses post-consumer or post-industrial PETG waste into new filament. It offers a sustainable alternative to virgin PETG with comparable strength, toughness, and chemical resistance.
Somos® EvoLVe 128 is a tough, white resin that looks and feels like a finished plastic, suited to functional prototypes, snap-fits, and fixtures, though it softens at about 50 °C.
SLS polypropylene is a lightweight, ductile, chemically resistant plastic that tolerates repeated bending. It is suited to durable functional parts, though it softens at around 60 °C under load.
Accura® Xtreme is a tough resin with good elongation that simulates polypropylene and ABS for snap-fits, assemblies, and functional prototypes, though it deflects under load at only about 54–62 °C.
Recycled rPLA reprocesses post-consumer or post-industrial PLA waste into new filament. It offers a more sustainable alternative to virgin PLA with generally similar, though somewhat more variable, mechanical properties.
Castable resin is a synthetic photopolymer engineered to burn out cleanly with minimal ash during investment casting. It offers a more affordable alternative to wax-based casting patterns.
Glass fiber ASA is ASA reinforced with chopped glass fiber, giving higher stiffness and about 10 °C more heat deflection than standard ASA while keeping its UV and weather resistance, though it is less ductile.
Polypropylene is a versatile and durable material, highly suitable for compliant and functional parts. The FDM technology provides a cheaper alternative to SLS or MJF printed parts.
SLS glass-filled nylon PA12 is a stiff, wear-resistant PA12 with higher heat deflection under load than standard nylon, suited to rigid functional parts, though it is less ductile.
Accura® 25 is a white, polypropylene-like resin (Shore 80D) with good elongation and shape retention, used to simulate and replace CNC-machined polypropylene parts such as snap-fits and functional assemblies.
Durable resin is a polypropylene-like photopolymer with low modulus, high elongation, and the highest impact strength of common resin options. It is ideal for pliable parts like living hinges and low-friction moving components.
HIPS is polystyrene toughened with polybutadiene rubber, a lightweight, easily painted plastic with moderate impact resistance, similar to ABS but less tough.
MJF flexible TPU is a rubber-like, tear-resistant material with high rebound and good abrasion resistance that's suited to flexible functional prototypes and wear-prone parts.
Nylon PA6 is a stiff, heat-resistant nylon that is stronger than PA12 when dry. It is sutiable for rigid functional parts, though it absorbs more moisture and is less flexible.
Gold is a precious metal, typically offered as solid 14K or 18K in yellow, red, and white tones, used for jewelry and unique art pieces.
PVB filament is a semi-rigid material that can be smoothed to a glossy, layer-free finish, with low warping, suited to display models and visual prototypes
PA 2200 is a widely used white nylon 12 grade with a balanced profile of strength, stiffness, and chemical resistance. It is a standard for functional SLS prototypes and rugged, end-use industrial components.
PHA (Polyhydroxyalkanoate) filament is a biodegradable type of plastic used in 3D printing, made through the fermentation of plant sugars by bacteria. It a great choice for applications that require biodegradability.
Lightweight PLA (LW-PLA) is a specialized 3D printing filament that expands up to three times its volume for lighter prints without losing the strength of standard PLA.
Flame-retardant PA 12 for MJF, offering durability, dimensional stability, and fire compliance for functional and safety-critical parts.
Alumide is an aluminum-filled nylon 12 with a metallic gray look, high stiffness, and heat deflection around 144 °C under load, suited to rigid parts, jigs, and models, though it is less flexible than standard nylon.
PET 3D prints offer a strong balance of toughness, chemical resistance, and dimensional stability. The material produces durable parts with good layer adhesion and a semi-gloss surface finish.
VisiJet® M2R-TN parts have a durable, tan-colored finish with excellent impact resistance and dimensional accuracy. Ideal for functional prototypes and mechanical components, they offer high performance straight from the printer.
HP® 3D HR PA 12 W is a high-reusability, white nylon (polyamide 12) designed for durable, functional 3D printed parts with excellent chemical and mechanical resistance.
420/BR is a bronze-infused stainless steel that offers good strength and wear resistance for decorative and industrial parts, but less corrosion resistance than solid stainless steel.
SLS flexible TPE is a rubber-like elastomer, available from very soft to firm, that withstands repeated bending and vibration, suited to gaskets, dampers, and soft functional parts, though it is weak and softens at modest temperatures.
iglidur® I190-PF is a material that offers high-strength and wear-resistance for low-friction, dry-running parts. It is deal for bushings, gliding elements, and motion components in automation and machinery.
Brass C360 is a highly machinable alloy with excellent corrosion resistance, ideal for precision parts like connectors, fittings, and gears in automotive, electrical, and industrial applications.
Brass H59 is a 60/40 copper-zinc brass with high strength and hardness, good hot-forming behavior, and fair machinability. It is a lower-cost choice for hardware, fittings, and general mechanical parts.
Nylon PA6 is a durable, wear-resistant thermoplastic with excellent impact strength, low friction, and good machinability. Ideal for precision mechanical components like gears, bushings, and automotive parts.
Brass C377 is a leaded brass optimized for hot forging and finish machining, offering good strength and excellent hot formability. It is the workhorse grade for valve bodies and fittings.
Brass C485, also known as high-leaded naval brass, is a tin-bearing brass with added lead. The tin gives it seawater corrosion resistance comparable to Brass C464, while the lead makes it a common choice for machined parts.
Brass C464, also known as naval brass, is a copper-zinc alloy with a small tin addition. The tin improves its corrosion resistance in seawater, including against dezincification, which can affect plain 60/40 brass.
Laser cutting is a precise manufacturing process that uses a high-powered laser beam to melt, burn, or vaporize material, creating clean and accurate cuts in various wood types.
CNC-machined Brass C274 (yellow brass) is a 63/37 copper-zinc brass with good ductility, excellent cold workability, and moderate machinability, suited to plumbing fittings, electrical connectors, and drawn parts.
Brass C210 (gilding metal) is a copper-rich brass (about 95% copper, 5% zinc) with high electrical and thermal conductivity and good ductility, suited to jewelry components, craft metalwork, and decorative hardware.
Brass C230 (red brass) is an 85/15 copper-zinc brass with excellent corrosion resistance, excellent cold workability, and excellent brazing and soldering. It is suited to plumbing fittings, hardware, and fasteners.
Brass C280 (Muntz metal) is a 60/40 copper-zinc brass with higher strength than 70/30 brasses and excellent hot-forming behavior, suited to hot-forged parts, condenser plates, and large fasteners.