Markforged® Onyx

FDM 

Onyx is a carbon fiber reinforced nylon that is used to print strong prototypes or end-use parts.

About

Markforged onyx is a micro carbon fiber filled nylon that yields accurate parts with impeccable surface finish. It offers high strength, toughness, and chemical resistance, and due to the continuous fiber reinforcement, can yield aluminum-strength parts.

Technical Details

Accuracy
±0.3% (lower limit of ±0.2 mm)
Density
1.2 g/cm³
Min. wall thickness
1 mm

Technical Properties

Tensile strength
37 MPa
Tensile modulus
2400 MPa
Tensile elongation
25%
Flexural strength
71 MPa
Flexural modulus
3000 MPa
HDT (0.45 MPa)
145°C
Warping risk
N/A

Finishes

  • Standard

Colors

 

Properties

  • Chemical resistant
  • Durable
  • Functional