Material

MBJ 316L Steel

Metal binder jetted 316L Stainless Steel is sintered to 96–99% density with ductility like conventional 316L, but its yield strength is well below laser-melted 316L.

Manufacturing processes

Binder Jetting 

About

Metal binder jetted 316L Stainless Steel is a low-carbon austenitic stainless steel sintered to 96–99% of full density. Its properties resemble metal-injection-molded 316L, while its yield strength is less than half that of laser-melted 316L. It also has a lower fatigue strength, so it is less suited to highly loaded or fatigue-critical parts.

Metal binder jetted 316L Stainless Steel is a good option for complex, moderate-load stainless parts and prototypes.

Technical Details

Accuracy
±0.5% (lower limit of ±0.5 mm)
Density
7.9 g/cm³
Min. wall thickness
0.8 mm

Technical Properties

Tensile strength
550 - 700 MPa
Tensile modulus
190000 - 200000 MPa
Tensile elongation
20 - 40%
Flexural modulus
190000 - 200000 MPa
Default layer height
0.2 mm
Embossing
min. 0.8 mm
Engraving
min. 0.8 mm
Interlocking parts
Yes
Warping risk
Yes, for parts over 140mm or parts with thin long structures
Maximum printing dimensions
430 × 300 × 140 mm

Finishes

  • Standard Sintered
  • Polished
  • Sandblasted Matte

Properties

  • Heat resistant
  • Strong
  • Chemical resistant
  • Corrosion resistant
  • Water resistant
  • Functional

Colors