Craftcloud offers a wide range of materials, including plastics, metals, and a variety of finishes and colors for each.
42 results
316L Stainless Steel is a highly durable alloy known for its corrosion resistance and versatility in both industrial and aesthetic applications.
17-4 PH Stainless Steel is a martensitic precipitation-hardening steel with very high strength and hardness after heat treatment and corrosion resistance similar to 304, though it is magnetic and less corrosion resistant than 316.
Maraging steel is a class of ultra-low-carbon, ultra-high-strength steels hardened by aging, reaching roughly 1,400–2,400 MPa depending on grade, suited to tooling inserts, molds, and high-strength parts.
High-detail 316L Stainless Steel is 316L built with finer layers, which allows for thinner walls (about 0.5 mm) and smaller features than standard 316L, with similar strength and high ductility.
Metal binder jetted 316L Stainless Steel is sintered to 96–99% density with ductility like conventional 316L, but its yield strength is well below laser-melted 316L.
420/BR is a bronze-infused stainless steel that offers good strength and wear resistance for decorative and industrial parts, but less corrosion resistance than solid stainless steel.
Food safe 316L Stainless Steel is a low-carbon austenitic stainless steel with excellent corrosion resistance and higher yield strength than conventionally made 316L, offered with food-contact documentation, suited to food-processing parts.
High-detail 17-4 PH Stainless Steel is 17-4 PH built with finer layers, which allows for thinner walls and smaller features than the standard grade.
Stainless steel 316L offers excellent corrosion resistance, especially in marine or chemical settings. It’s strong, weldable, and ideal for medical, food-grade, and industrial CNC-milled parts.
Carbon Steel C45 is a medium-carbon, non-alloy steel with moderate strength, higher than that of lower-carbon grades. It is commonly used for shafts, axles, spindles, studs and general engineering components.
Carbon Steel 1018 is a versatile, low-carbon steel known for its machinability, weldability, and strength, and is suitable for gears, shafts, and structural parts.
Stainless Steel 17-4 PH is a strong, corrosion-resistant alloy ideal for high-stress parts. It’s used in aerospace, medical, and tooling applications, and can be heat-treated for added hardness.
Tool Steel A2 (annealed) is a machinable, tough, and dimensionally stable steel, ideal for CNC parts, fixtures, dies, and precision tools, with the option for later hardening.
Carbon Steel A36 is a low-cost, structural steel with good strength and weldability. Ideal for frames, brackets, and general-purpose parts. It offers low corrosion resistance and moderate machinability.
Tool steel S7 ships annealed for easy machining and is hardened afterward into a shock-resisting tool steel built for impact toughness rather than maximum hardness, suited to tools and dies under repeated impact.
Carbon Steel 1215 produces highly precise parts with excellent machinability and a smooth surface finish. It offers moderate strength and is ideal for high-volume production of detailed components where tight tolerances and cost efficiency are priorities.
Tool Steel P20 produces strong, wear-resistant parts with excellent toughness and dimensional stability. It is ideal for molds, tooling, and precision components requiring reliable mechanical performance.
Tool steel 6F7 (1.2767) is a high-nickel alloy tool steel valued for exceptional toughness even at high hardness, which makes it a strong choice for applications needing impact resistance alongside wear resistance.
MoldJet® 316L Stainless Steel is a 316L from a sinter-based process that reaches about 99.9% relative density, with near-isotropic tensile strength and high ductility, suited to corrosion-resistant parts.
Markforged® H13 is a hot-work tool steel that is suited to tool bodies, brazing fixtures, and mold inserts, though about 94.5% dense and less ductile than wrought H13.
Ultrafuse 316L produces sintered 316L stainless steel parts with high ductility and corrosion resistance, similar in strength to annealed wrought 316L, though with lower yield strength than laser-melted 316L.
Ultrafuse 17-4 PH produces sintered 17-4 PH stainless steel parts that are strong, magnetic, and corrosion resistant, and can be heat treated to higher strength, though with lower ductility than other metal 3D printing processes.
Carbon Steel C45E is a medium-carbon steel with a specified low sulfur limit. It offers higher strength and hardness than low-carbon mild steel, with good machinability and the option of heat treatment.
Stainless mold steel 420 ships annealed and machinable, and can then be hardened into a corrosion-resistant plastic mold steel, combining genuine stainless properties with good polishability.
Tool steel O2 ships annealed and machinable, then oil-hardens into a general-purpose cold-work tool steel similar to O1 but with added manganese for improved hardenability.
Tool steel M42 ships annealed for machining and is hardened afterward into a cobalt-enhanced high-speed steel reaching higher hardness than standard M2, suited to the most demanding cutting applications despite being more brittle and costly.
Tool steel H13 ships annealed and machinable, and can then be air-hardened into a chromium-molybdenum hot-work tool steel valued for strength at elevated temperature, good toughness, and resistance to heat-cracking and thermal fatigue.
Tool steel D3 ships annealed and machinable, and can then be hardened into a high-carbon, high-chromium cold-work steel with excellent wear resistance.
Tool steel D2 ships annealed and machinable, and can then be hardened into one of the most widely used cold-work tool steels, prized for exceptional wear resistance, high compressive strength, and excellent dimensional stability.
Tool steel M2 ships in a soft, machinable annealed state and can be hardened and tempered afterward to become the industry-standard high-speed steel, balancing wear resistance, toughness, and red-hardness.
Tool Steel D6 ships annealed and machinable, and can then be hardened into a high-chromium cold-work steel with added tungsten for better through-hardening.
Tool Steel W1 ships annealed and highly machinable, and is the simplest and most economical tool steel, water-hardened afterward for applications without demanding heat or wear requirements.
Tool steel S1 ships annealed and machinable, and can be hardened into a shock-resisting tool steel combining tungsten's toughness and wear resistance with chromium's dimensional stability.
CNC-machined steel S355J2 is a higher-strength European structural steel, offering roughly 50% greater yield strength than S235JR, with guaranteed toughness down to -20 °C for demanding structural and cold-environment applications.
CNC-machined steel S235JR is the most widely used European non-alloy structural steel, valued for excellent weldability, formability, and machinability at a low cost, though with only moderate strength.
Tool steel O1 produces high-strength, wear-resistant parts with excellent hardness potential and dimensional stability. It is ideal for precision tooling and durable mechanical components.
CNC-machined Carbon Steel 1010 is a very low-carbon steel with good ductility and formability, low strength, and fairly good machinability. It is suited to cold-headed fasteners and low-stress parts.
CNC-machined Carbon Steel 1015 is a low-carbon steel (about 0.15% carbon) with good ductility and slightly more strength than 1010, suited to light-duty machine parts and formed components.
CNC-machined Carbon Steel 1020 is a commonly used low-carbon steel with a good balance of strength and ductility, good machinability, and the ability to be hardened or carburized. It is suited to general machine parts.
CNC-machined Carbon Steel 1025 is a low-carbon steel (about 0.25% carbon) with slightly more strength than 1020 and good ductility and machinability, suited to general machine parts.
CNC-machined Carbon Steel 1035 is a medium-carbon steel with higher strength and hardness than the low-carbon grades, good machinability, and the ability to be heat treated. It is suited to shafts and stressed machine parts.
CNC-machined Carbon Steel 1040 is a medium-carbon steel that can be heat treated to high strength, with good ductility.