Material
Nickel Alloy 2.4610 (NiMo16Cr16Ti, Alloy C-4)
Nickel alloy 2.4610 (Alloy C-4) is a nickel-molybdenum-chromium alloy with high pitting resistance and very good resistance to hydrochloric acid. It stays ductile and corrosion resistant after prolonged heating and welding.
Manufacturing processes
About
2.4610 (Alloy C-4 or Hastelloy C-4) is a nickel-molybdenum-chromium alloy (about 16% each) with a small titanium addition. It has very good general corrosion resistance, high resistance to pitting, and very good resistance to hydrochloric acid, and stays ductile and corrosion resistant after long exposure at 650-1,040 °C and in weld heat-affected zones.
Like other nickel alloys it work-hardens, so machining is demanding.
Nickel alloy 2.4610 is a good option for chemical-process equipment and welded assemblies that see prolonged heat.
Technical Details
- Accuracy
- ±0.2% (lower limit of ±0.13 mm)
- Density
- 8.8 g/cm³
- Min. wall thickness
- -
Technical Properties
- Tensile strength
- 690 - 800 MPa
- Tensile modulus
- 210000 MPa
- Embossing
- min. 0.3 mm
- Engraving
- min. 0.3 mm
- Warping risk
- N/A