Craftcloud offers a wide range of materials, including plastics, metals, and a variety of finishes and colors for each.
76 results
316L Stainless Steel is a highly durable alloy known for its corrosion resistance and versatility in both industrial and aesthetic applications.
The strongest 3D printable material, titanium offers good dimensional accuracy and fine details.
17-4 PH Stainless Steel is a martensitic precipitation-hardening steel with very high strength and hardness after heat treatment and corrosion resistance similar to 304, though it is magnetic and less corrosion resistant than 316.
High-detail 316L Stainless Steel is 316L built with finer layers, which allows for thinner walls (about 0.5 mm) and smaller features than standard 316L, with similar strength and high ductility.
Inconel 718 is a precipitation-hardening nickel-chromium superalloy with high strength, creep resistance, and fatigue strength at temperatures up to about 700 °C.
Metal binder jetted 316L Stainless Steel is sintered to 96–99% density with ductility like conventional 316L, but its yield strength is well below laser-melted 316L.
Gold is a precious metal, typically offered as solid 14K or 18K in yellow, red, and white tones, used for jewelry and unique art pieces.
420/BR is a bronze-infused stainless steel that offers good strength and wear resistance for decorative and industrial parts, but less corrosion resistance than solid stainless steel.
Platinum is a dense, silvery-white precious metal that resists tarnish and corrosion and is hypoallergenic, typically supplied as 950 platinum for fine jewelry.
Food safe 316L Stainless Steel is a low-carbon austenitic stainless steel with excellent corrosion resistance and higher yield strength than conventionally made 316L, offered with food-contact documentation, suited to food-processing parts.
Nickel-titanium (NiTi, nitinol) is a shape memory alloy that recovers its shape after deformation, with superelastic recovery of about 3–6% strain in printed parts, though its behavior depends on precise nickel content and heat treatment.
Food safe titanium (Ti-6Al-4V) is a lightweight, non-magnetic, corrosion-resistant alloy with high strength, offered with food-contact documentation, suited to food-processing parts that need strength at moderate temperatures.
High-detail 17-4 PH Stainless Steel is 17-4 PH built with finer layers, which allows for thinner walls and smaller features than the standard grade.
Markforged® Inconel 625 is a nickel-chromium superalloy with high corrosion resistance and strength at high temperatures, suited to high-temperature fixtures and corrosion-resistant fittings.
MoldJet® 316L Stainless Steel is a 316L from a sinter-based process that reaches about 99.9% relative density, with near-isotropic tensile strength and high ductility, suited to corrosion-resistant parts.
Stainless steel 316L offers excellent corrosion resistance, especially in marine or chemical settings. It’s strong, weldable, and ideal for medical, food-grade, and industrial CNC-milled parts.
Stainless Steel 304 is strong, corrosion-resistant, and ideal for precise CNC-milled parts in automotive, aerospace, and industrial use. It offers excellent durability and dimensional stability.
Stainless steel 17-4 PH is a strong, corrosion-resistant alloy ideal for high-stress parts. It’s used in aerospace, medical, and tooling applications, and can be heat-treated for added hardness.
Stainless Steel 303 is a corrosion-resistant, machinable alloy used for high-precision components such as gears, shafts, and fasteners in automotive, aerospace, and industrial applications.
Aluminum 5052 is a strong, corrosion-resistant alloy ideal for CNC machining. It offers high fatigue strength, excellent workability, and is widely used in marine, automotive, and aerospace parts.
Nickel Alloy 2.4858 (Alloy 825) is a titanium-stabilized nickel-iron-chromium alloy with excellent resistance to sulfuric and phosphoric acids, chloride stress corrosion cracking, and weld-related intergranular corrosion.
Nickel Alloy 2.4889 (Alloy 45TM) is a nickel-chromium-iron-silicon alloy designed for high-temperature oxidizing, carburizing, and sulfur-bearing atmospheres, resisting scaling up to about 1,000 °C.
Nickel-Iron Alloy 2.4610 (Alloy C-4) is a nickel-molybdenum-chromium alloy with high pitting resistance and very good resistance to hydrochloric acid. It stays ductile and corrosion resistant after prolonged heating and welding.
Nickel Alloy 2.4816 (Alloy 600) is a nickel-chromium-iron alloy that resists chlorides, oxidation, and hot alkalis, keeping good properties from low to elevated temperatures.
Nickel Alloy 2.4602 (Alloy 22) is a nickel-chromium-molybdenum-tungsten alloy with outstanding resistance to pitting, crevice corrosion, and both oxidizing and reducing acids.
Nickel Alloy 2.4605 (Alloy 59) is a nickel-chromium-molybdenum alloy with very low carbon and silicon that offers outstanding resistance to chloride pitting and mixed acids and good thermal stability.
Nickel Alloy 2.4856 (Alloy 625) is a high-strength nickel-chromium-molybdenum-niobium alloy with excellent resistance to pitting, crevice corrosion, and chloride stress corrosion cracking, from cryogenic temperatures to about 980 °C.
Nickel Alloy 2.4851 (Alloy 601) is a nickel-chromium-iron alloy with added aluminum for outstanding oxidation resistance up to about 1,200 °C and good resistance to carburizing conditions.
Nickel Alloy 2.4600 (Alloy B-3) is a nickel-molybdenum alloy with outstanding resistance to hydrochloric acid at all concentrations.
Nickel Alloy 2.4633 (Alloy 602 CA) is a high-carbon nickel-chromium-iron-aluminum alloy with outstanding creep strength and oxidation resistance at temperatures up to about 1,200 °C.
Nickel Alloy 2.4360 (Alloy 400) is a nickel-copper alloy with exceptional resistance to seawater and hydrofluoric acid, offering moderate strength and toughness for marine and chemical equipment.
Iron-Chromium Alloy 1J117 is a corrosion-resistant soft magnetic alloy, the equivalent of 430FR solenoid-quality stainless. It offers moderate magnetic performance for solenoid valves and electromagnetic parts.
Aluminum 5086 is a non-heat-treatable aluminum-magnesium alloy with excellent seawater corrosion resistance and good weldability, and is widely used for marine hulls but limited to cooler service temperatures.
Aluminum 5454 is a non-heat-treatable aluminum-magnesium alloy with very good corrosion resistance and moderate strength, and it is chosen over higher-magnesium marine alloys for tanks and vessels that run warm.
Copper C102 is oxygen-free copper (99.95% minimum) with the same high conductivity as standard copper. It is chosen where purity matters, such as vacuum use and brazed or welded assemblies.
Ultrafuse 316L produces sintered 316L stainless steel parts with high ductility and corrosion resistance, similar in strength to annealed wrought 316L, though with lower yield strength than laser-melted 316L.
Stainless steel 304L is a low-carbon variant of 304, engineered to resist sensitization during welding at a slight cost to strength. This makes it the preferred choice for welded assemblies and processing equipment.
Nickel Silver C77000 is a copper-nickel-zinc alloy with a white, silver-like appearance. Despite its name, it contains no silver. It is tarnish resistant and has better corrosion resistance than standard brass.
Stainless steel 316 is arguably the classic marine-grade stainless, adding molybdenum over 304 for superior resistance to chlorides and reducing acids.
Ultrafuse 17-4 PH produces sintered 17-4 PH stainless steel parts that are strong, magnetic, and corrosion resistant, and can be heat treated to higher strength, though with lower ductility than other metal 3D printing processes.
Brass C377 is a leaded brass optimized for hot forging and finish machining, offering good strength and excellent hot formability. It is the workhorse grade for valve bodies and fittings.
Copper C145, also known as tellurium copper, is copper with a small tellurium addition. It offers high electrical and thermal conductivity with mechanical properties similar to pure copper, and is a common choice for machined copper parts.
Brass C485, also known as high-leaded naval brass, is a tin-bearing brass with added lead. The tin gives it seawater corrosion resistance comparable to Brass C464, while the lead makes it a common choice for machined parts.
Brass C464, also known as naval brass, is a copper-zinc alloy with a small tin addition. The tin improves its corrosion resistance in seawater, including against dezincification, which can affect plain 60/40 brass.
High-strength titanium alloy with excellent corrosion resistance and low weight. Used in aerospace, medical, and high-performance mechanical components.
Aluminum 5005 is a non-heat-treatable aluminum-magnesium alloy best known for producing an exceptionally consistent anodized finish, though it machines less readily than 3003 or 6061.
Aluminum 3003 is a non-heat-treatable, manganese-strengthened alloy prized for excellent corrosion resistance and formability, though it offers lower strength than heat-treatable grades like 6061.
Aluminum 1100 is a commercially pure (99% min) aluminum grade offering the best corrosion resistance and electrical/thermal conductivity of the wrought aluminum family, at the cost of lower strength than alloyed grades.
Stainless Steel 15-5 produces strong, corrosion-resistant parts with excellent dimensional accuracy and a clean machined surface. It is well suited for high-strength structural and industrial components.
Super-Invar (4J32) is an iron-nickel-cobalt precision alloy with the lowest thermal expansion of the Invar family, ideal for ultra-precision dimensional stability.
Nickel 200 (Pure Nickel N6) is a commercially pure nickel grade that offers excellent alkali corrosion resistance and high electrical and thermal conductivity.
Magnesium AZ91D is the most widely used die-cast magnesium alloy, and it offers the best corrosion resistance in the AZ family alongside good strength-to-weight performance.
Magnesium Alloy AZ31B is a lightweight, highly machinable wrought alloy that offers good ductility and vibration damping, though it needs surface protection in humid or corrosive environments.
Invar 36 (4J36) is the classic 36% nickel-iron alloy famous for its extremely low thermal expansion up to about 200 °C.
Stainless steel 420J2 is a heat-treatable martensitic alloy that offers good machinability as-milled, with the option to harden to 50–55 HRC afterward.
Titanium Grade 7 is a corrosion-resistant, commercially pure titanium-palladium alloy that offers the best chemical resistance of any titanium grade, especially against reducing acids and chlorides.
Super Duplex Stainless Steel 2507 offers the highest corrosion resistance and strength in the duplex family, as it's built for extreme chloride exposure like offshore and desalination equipment.
Duplex Stainless Steel 2205 combines roughly double the yield strength of standard austenitic grades with excellent resistance to chloride pitting, crevice corrosion, and stress corrosion cracking.
Stainless steel 444 is a molybdenum-added ferritic alloy with corrosion resistance approaching 316L, and it's essentially immune to chloride stress corrosion cracking.
Stainless steel 430 is a magnetic, chromium-only ferritic alloy offering a bright, polishable finish at lower cost than nickel-bearing grades.
Stainless steel 321 is a titanium-stabilized austenitic alloy that is engineered to resist intergranular corrosion during welding and sustained high-temperature service.
Stainless Steel 409 is a low-cost, titanium-stabilized ferritic alloy built for heat and exhaust-gas resistance, not for decorative or highly corrosive applications.
Titanium Grade 2 produces lightweight, corrosion-resistant parts with excellent strength and durability. It is ideal for precision components exposed to harsh environments and demanding applications.
Stainless steel 440C produces extremely hard, wear-resistant parts with excellent strength and moderate corrosion resistance. It is ideal for precision components requiring high durability and long service life.
Stainless steel 416 produces precise parts with excellent machinability, good strength, and moderate corrosion resistance. It is ideal for high-volume production of detailed components requiring tight tolerances and clean surface finishes.
Stainless steel 410 produces strong, wear-resistant parts with good machinability and moderate corrosion resistance. It is well suited for structural and mechanical components requiring hardness and durability.
Stainless Steel 18-8 produces corrosion-resistant, durable parts with good strength and a clean machined surface. It is widely used for general-purpose components requiring reliability in humid or mildly corrosive environments.
Stainless Steel 420 produces high-strength, hardened parts with excellent wear resistance and moderate corrosion resistance. It is ideal for components requiring durability, sharp edges, and long service life.
Aluminum 5083 is a corrosion-resistant, high-strength alloy ideal for CNC machined parts in marine, automotive, and aerospace applications.
Titanium Grade 1 (Ti-3.7025) is a lightweight, highly corrosion-resistant material, ideal for aerospace, medical, and marine applications, offering excellent formability and biocompatibility.
CNC-machined Copper C122 (DHP copper) is a phosphorus-deoxidized copper that welds and brazes well and resists hydrogen embrittlement, with lower conductivity than C110.
CNC-machined Copper Nickel C706 (90/10) is a copper-nickel alloy with excellent seawater corrosion resistance and good resistance to biofouling, a lower-cost choice for marine piping and valve parts.
CNC-machined Copper Nickel C715 (70/30) is a high-strength copper-nickel alloy with excellent seawater corrosion and erosion resistance, suited to faster-flowing and more demanding marine service than 90/10.
Brass C210 (gilding metal) is a copper-rich brass (about 95% copper, 5% zinc) with high electrical and thermal conductivity and good ductility, suited to jewelry components, craft metalwork, and decorative hardware.
Brass C230 (red brass) is an 85/15 copper-zinc brass with excellent corrosion resistance, excellent cold workability, and excellent brazing and soldering. It is suited to plumbing fittings, hardware, and fasteners.
Scalmalloy® is a high-strength aluminum-magnesium-scandium alloy, suited to lightweight brackets, thermal management components, and ducts.