Craftcloud offers a wide range of materials, including plastics, metals, and a variety of finishes and colors for each.
23 results
4J50 is a nickel-iron precision alloy with thermal expansion matched for soft-glass and ceramic sealing, plus soft-magnetic characteristics.
Nickel-Iron Alloy 1J85 (Supermalloy) is a soft magnetic alloy with about 80% nickel and 5% molybdenum. It offers very high permeability and low coercivity for weak-field shielding, sensors, and transformers.
Nickel-Iron Alloy 1J50 (FeNi50) is a soft magnetic nickel-iron alloy (about 50% nickel) that combines high magnetic permeability with high saturation induction. It is used for transformer cores, relays, and magnetic circuit parts.
Pure Iron DT4 is an electromagnetic-grade pure iron prized for high magnetic permeability and low coercivity in DC electromagnetic components.
Kovar (4J29) is a nickel-cobalt-iron alloy engineered to match the thermal expansion of hard borosilicate glass and alumina ceramics for reliable, crack-free hermetic seals.
Stainless steel 420J2 is a heat-treatable martensitic alloy that offers good machinability as-milled, with the option to harden to 50–55 HRC afterward.
Stainless steel 430 is a magnetic, chromium-only ferritic alloy offering a bright, polishable finish at lower cost than nickel-bearing grades.
Stainless Steel 409 is a low-cost, titanium-stabilized ferritic alloy built for heat and exhaust-gas resistance, not for decorative or highly corrosive applications.
Commercially pure iron offers excellent machinability, magnetic properties, and ductility. It is ideal for magnetic, scientific, or precision parts requiring minimal alloy content.
Nickel-Iron Alloy 1J36 is a soft magnetic alloy with about 36% nickel, specified for magnetic performance and resistance to humid or salt-spray environments rather than for low thermal expansion.
CNC-machined Carbon Steel 1010 is a very low-carbon steel with good ductility and formability, low strength, and fairly good machinability. It is suited to cold-headed fasteners and low-stress parts.
CNC-machined Carbon Steel 1015 is a low-carbon steel (about 0.15% carbon) with good ductility and slightly more strength than 1010, suited to light-duty machine parts and formed components.
CNC-machined Carbon Steel 1020 is a commonly used low-carbon steel with a good balance of strength and ductility, good machinability, and the ability to be hardened or carburized. It is suited to general machine parts.
CNC-machined Carbon Steel 1025 is a low-carbon steel (about 0.25% carbon) with slightly more strength than 1020 and good ductility and machinability, suited to general machine parts.
CNC-machined Carbon Steel 1035 is a medium-carbon steel with higher strength and hardness than the low-carbon grades, good machinability, and the ability to be heat treated. It is suited to shafts and stressed machine parts.
CNC-machined Carbon Steel 1040 is a medium-carbon steel that can be heat treated to high strength, with good ductility.
CNC-machined Alloy Steel 12Cr1MoV is a low-alloy chromium-molybdenum-vanadium heat-resistant steel with good creep strength and weldability.
CNC-machined Alloy Steel 30CrMnSiA is a chromium-manganese-silicon steel that reaches at least 1,080 MPa tensile strength after quenching and tempering, with good toughness, suited to high-strength structural parts.
Alloy Steel 40Cr is a medium-carbon chromium steel with much better hardenability than plain 45 steel, reaching at least 980 MPa tensile strength after quenching and tempering, suited to shafts and gears.
Carbon Steel 65Mn is a high-carbon manganese spring steel with good elasticity and hardenability, reaching at least 980 MPa tensile strength after quenching and tempering.
Tool Steel 75Cr1 (annealed) is a high-carbon chromium steel (0.70–0.80% carbon) that hardens to about 44–52 HRC for saw blades and knives, though it has no corrosion resistance.
Tool Steel 9SiCr (annealed) is a low-alloy cold-work steel with high hardenability that hardens to at least 62 HRC, suited to taps, reamers, and dies, though toughness is limited.
Tool Steel Cr12MoV (annealed) is a high-carbon, 12% chromium cold-work steel with very high wear resistance, suited to dies and molds, though it has low toughness.