SLS/MJF Glass-Filled Nylon

SLSMJF 

Glass-filled Nylon is great for functional parts that require strength and rigidity.

About

This material is a combination of polyamide powder (PA12) and glass fibers. It is more durable and has a higher resistance than standard Nylon PA12. It allows for creating complex structures and stiff functional parts. It has a high thermal capability (170 °C) and is commonly used in the automotive and construction industry. It is not advisable for detailed parts.

Technical Details

Accuracy
±0.3% (lower limit of ±0.3 mm)
Density
1.3 g/cm³
Min. wall thickness
0.8 mm

Technical Properties

Tensile strength
30 - 48 MPa
Tensile modulus
2997 - 4068 MPa
Tensile elongation
2 - 8%
Flexural strength
37 - 73 MPa
Flexural modulus
2600 - 3106 MPa
HDT (0.45 MPa)
157 - 179°C
Embossing
0.5 mm
Engraving
0.5 mm
Default layer height
0.1 mm
Default infill
100%
Interlocking parts
Yes
Warping risk
Yes, for parts over 140mm or parts with thin long structures

Finishes

  • Standard
  • Polished
  • Shot Peened
  • Vapor Smoothed

Colors

+9

Properties

  • Strong
  • Heat resistant
  • Chemical resistant
  • Functional
  • Visual