SLS Glass Fiber Nylon PA6
SLS Glass Fiber Nylon PA6 is a glass-fiber-reinforced nylon with exceptional stiffness, heat resistance, and dimensional stability. The material’s matte surface makes it ideal for strong, durable, and thermally stable functional parts.
About
SLS Glass Fiber Reinforced Nylon 6 (PA6 GF40) is a high-performance thermoplastic designed for applications that demand superior strength, rigidity, and thermal stability. Containing approximately 40% glass fiber, the material exhibits excellent stiffness and dimensional stability, even under high mechanical loads or elevated temperatures. Printed parts feature a matte finish with a slightly textured surface characteristic of SLS processing. The glass fiber reinforcement significantly reduces warping and shrinkage, ensuring tight tolerances and consistent accuracy. With high heat deflection, chemical resistance, and impact strength, SLS PA6 GF40 is well-suited for industrial applications such as automotive housings, structural brackets, and components exposed to mechanical or thermal stress.
Technical Details
- Accuracy
- ±0.3% (lower limit of ±0.3 mm)
- Density
- 1.41 g/cm³
- Min. wall thickness
- 0.8 mm
Technical Properties
- Tensile strength
- 73 - 88 MPa
- Tensile modulus
- 6.5 - 6.9 MPa
- Tensile elongation
- 1.6 - 1.9%
- Flexural strength
- 110 - 130 MPa
- Flexural modulus
- 5800 - 6200 MPa
- HDT (0.45 MPa)
- 219°C
- HDT (1.8 MPa)
- 200°C
- Default layer height
- 0.1 mm
- Default infill
- 100%
- Warping risk
- Low