About

Somos Evolve is a superb choice of material for tough and detailed prototypes. The material strikes a balance between strength, print accuracy, and fine detail. This liquid polymer is 3D printed on industrial grade 3D printers using a process called Stereolithography, resulting in remarkable print quality. It is generally used for fixtures, jigs and durable prototypes.

Technical Details

Accuracy

±0.2% (lower limit of ±0.2 mm)

Density

1.12 g/cm³

Min. wall thickness

0.6 mm

Tensile modulus

2964 MPa

Tensile elongation

11%

Flexural modulus

2654 MPa

HDT (0.45 MPa)

52.3°C

HDT (1.8 MPa)

49.6°C

Warping risk

N/A