Material Guide

Browse our materials

Materials (96)
Properties
Accuracy
Finishes

PLA is a low-cost plastic, perfect for prototypes and functional parts that do not require strength or heat resistance.

PLA is a low-cost plastic, perfect for prototypes and functional parts that do not require strength or heat resistance.

FDM 
Properties: Visual
Accuracy: ±0.3% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard, Sanded
+99
  • Visual
  • ±0.3% (lower limit of ±0.2mm)
  • Standard
  • Sanded
SLS Nylon PA12 show details

Nylon PA12 (Polyamide) is a strong and heat-resistant material commonly used to print strong and functional parts.

SLS Nylon PA12 show details

Nylon PA12 (Polyamide) is a strong and heat-resistant material commonly used to print strong and functional parts.

SLS 
Properties: Strong, Heat resistant, Functional, Visual
Accuracy: ±0.3% (lower limit of ±0.3mm)
Finishes: Raw, Polished, Waterproof, Dyed Velvet, Satin
+39
  • Strong
  • Heat resistant
  • Functional
  • Visual
  • ±0.3% (lower limit of ±0.3mm)
  • Raw
  • Polished
  • Waterproof
  • Dyed Velvet
  • Satin
Standard Resin show details

Standard resin is a low-cost material, best used for visual models, figurines, and prototypes.

Standard Resin show details

Standard resin is a low-cost material, best used for visual models, figurines, and prototypes.

SLADLPMSLALCDLFS 
Properties: High detail, Visual, Smooth
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard, Matte, Glossy
+38
  • High detail
  • Visual
  • Smooth
  • ±0.2% (lower limit of ±0.2mm)
  • Standard
  • Matte
  • Glossy

ABS is a strong and versatile material with good impact and chemical resistance. It is great for strong functional parts and prototypes.

ABS is a strong and versatile material with good impact and chemical resistance. It is great for strong functional parts and prototypes.

FDM 
Properties: Impact resistant, Functional
Accuracy: ±0.3% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard, Sanded, ESD, Polished
+44
  • Impact resistant
  • Functional
  • ±0.3% (lower limit of ±0.2mm)
  • Standard
  • Sanded
  • ESD
  • Polished
316L Steel show details

This stainless steel is used for highly detailed, strong, and functional parts.

316L Steel show details

This stainless steel is used for highly detailed, strong, and functional parts.

DMLSSLMLMM 
Properties: Chemical resistant, Strong, Heat resistant, Functional
Accuracy: ±0.3% (lower limit of ±0.2mm)
Finishes: Sandblasted Matte, Polished glossy, Satin glossy
 
  • Chemical resistant
  • Strong
  • Heat resistant
  • Functional
  • ±0.3% (lower limit of ±0.2mm)
  • Sandblasted Matte
  • Polished glossy
  • Satin glossy

PETG, widely used for durable and functional parts, combines strength, chemical resistance, and low cost.

PETG, widely used for durable and functional parts, combines strength, chemical resistance, and low cost.

FDM 
Properties: Chemical resistant, Functional, Strong
Accuracy: ±0.4% (lower limit of ±0.4mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard, Sanded, ESD
+42
  • Chemical resistant
  • Functional
  • Strong
  • ±0.4% (lower limit of ±0.4mm)
  • Standard
  • Sanded
  • ESD
MJF Nylon PA12 show details

Developed by HP, MJF Nylon is a widely used material for strong and detailed end-use parts and prototypes.

MJF Nylon PA12 show details

Developed by HP, MJF Nylon is a widely used material for strong and detailed end-use parts and prototypes.

MJF 
Properties: Strong, Impact resistant, Functional, Visual
Accuracy: ±0.3% (lower limit of ±0.3mm)
Finishes: Raw, Polished
+11
  • Strong
  • Impact resistant
  • Functional
  • Visual
  • ±0.3% (lower limit of ±0.3mm)
  • Raw
  • Polished
Tough Resin show details

Tough resin is a perfect choice for strong, detailed functional prototypes and parts that need to withstand stress and strain.

Tough Resin show details

Tough resin is a perfect choice for strong, detailed functional prototypes and parts that need to withstand stress and strain.

SLALCDDLPcDLMMSLA+2
Properties: Strong, Durable, High detail, Functional, Smooth
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard, Matte, Glossy
+18
  • Strong
  • Durable
  • High detail
  • Functional
  • Smooth
  • ±0.2% (lower limit of ±0.2mm)
  • Standard
  • Matte
  • Glossy
Aluminum show details

This strong and lightweight material features good thermal properties and is widely used for functional metal parts.

Aluminum show details

This strong and lightweight material features good thermal properties and is widely used for functional metal parts.

DMLSSLM 
Properties: Strong, Heat resistant, Functional
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Raw Matte, Deburred, Sandblasted, Glassblasted
 
  • Strong
  • Heat resistant
  • Functional
  • ±0.2% (lower limit of ±0.2mm)
  • Raw Matte
  • Deburred
  • Sandblasted
  • Glassblasted
High-Detail Resin show details

High-detail resin is ideal for printing intricate details, such as small figurines and model cars and trains.

High-Detail Resin show details

High-detail resin is ideal for printing intricate details, such as small figurines and model cars and trains.

DLPSLAMSLALCDPolyJet+1
Properties: High detail, Visual, Smooth
Accuracy: ±0.1% (lower limit of ±0.15mm)
Finishes: Standard Smooth
+26
  • High detail
  • Visual
  • Smooth
  • ±0.1% (lower limit of ±0.15mm)
  • Standard Smooth
FDM TPU show details

FDM-printed TPU is great for producing flexible parts and prototypes, such as casings and shock absorbers.

FDM TPU show details

FDM-printed TPU is great for producing flexible parts and prototypes, such as casings and shock absorbers.

FDM 
Properties: Flexible, Impact resistant, Durable
Accuracy: ±0.4% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
+27
  • Flexible
  • Impact resistant
  • Durable
  • ±0.4% (lower limit of ±0.2mm)
  • Standard
Transparent Resin show details

Transparent resin is a high-detail material suitable for transparent prototypes, figurines, and visual models.

Transparent Resin show details

Transparent resin is a high-detail material suitable for transparent prototypes, figurines, and visual models.

SLAPolyJetMSLADLPLCD 
Properties: High detail, Visual, Smooth, Transparent
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Transparent Clear
 
  • High detail
  • Visual
  • Smooth
  • Transparent
  • ±0.2% (lower limit of ±0.2mm)
  • Transparent Clear
Translucent Resin show details

Translucent resin is a high-detail material suitable for prototypes, figurines, and visual models that need to be semi transparent.

Translucent Resin show details

Translucent resin is a high-detail material suitable for prototypes, figurines, and visual models that need to be semi transparent.

SLADLPMSLALCDPolyJet 
Properties: High detail, Visual, Smooth
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard, Pearl Shimmer
+10
  • High detail
  • Visual
  • Smooth
  • ±0.2% (lower limit of ±0.2mm)
  • Standard
  • Pearl Shimmer
Powder-Based TPU show details

Powder-based TPU is a rubber-like material suitable for functional prototypes and wear-resistant parts.

Powder-Based TPU show details

Powder-based TPU is a rubber-like material suitable for functional prototypes and wear-resistant parts.

SLSMJF 
Properties: Flexible, Functional
Accuracy: ±1.8% (lower limit of ±1.5mm)
Finishes: Natural Grainy, Polished
+11
  • Flexible
  • Functional
  • ±1.8% (lower limit of ±1.5mm)
  • Natural Grainy
  • Polished

ASA is a strong and UV-resistant material that works great in outdoor applications.

ASA is a strong and UV-resistant material that works great in outdoor applications.

FDM 
Properties: UV resistant, Impact resistant
Accuracy: ±0.3% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard, Sanded, Polished
+28
  • UV resistant
  • Impact resistant
  • ±0.3% (lower limit of ±0.2mm)
  • Standard
  • Sanded
  • Polished
Sterling Silver show details

Sterling silver is the perfect material for jewelry and unique metal art pieces.

Sterling Silver show details

Sterling silver is the perfect material for jewelry and unique metal art pieces.

Lost Wax Casting 
Properties: High detail, Visual
Accuracy: ±5% (lower limit of ±0.4mm)
Finishes: Polished Shiny, Sandblasted, Satin, Antique
 
  • High detail
  • Visual
  • ±5% (lower limit of ±0.4mm)
  • Polished Shiny
  • Sandblasted
  • Satin
  • Antique
FDM Nylon show details

Nylon (Polyamide) is great for functional parts and prototypes due to its toughness and high-temperature and impact resistance.

FDM Nylon show details

Nylon (Polyamide) is great for functional parts and prototypes due to its toughness and high-temperature and impact resistance.

FDM 
Properties: Functional, Strong, Heat resistant, Impact resistant
Accuracy: ±0.3% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Raw, Glass Fiber-Reinforced, Nylon AF80 Aramid
+4
  • Functional
  • Strong
  • Heat resistant
  • Impact resistant
  • ±0.3% (lower limit of ±0.2mm)
  • Raw
  • Glass Fiber-Reinforced
  • Nylon AF80 Aramid
Polycarbonate show details

Polycarbonate is an industrial-grade thermoplastic with high heat resistance and high strength.

Polycarbonate show details

Polycarbonate is an industrial-grade thermoplastic with high heat resistance and high strength.

FDM 
Properties: Impact resistant, Functional, Heat resistant
Accuracy: ±0.3% (lower limit of ±0.3mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
+2
  • Impact resistant
  • Functional
  • Heat resistant
  • ±0.3% (lower limit of ±0.3mm)
  • Standard
Glass-Filled PEEK show details

Glass fibre reinforced PEEK is one of the highest-performance plastics available in the market. It exhibits exceptional mechanical, thermal, and chemical resistance properties.

Glass-Filled PEEK show details

Glass fibre reinforced PEEK is one of the highest-performance plastics available in the market. It exhibits exceptional mechanical, thermal, and chemical resistance properties.

FDM 
Properties: Heat resistant, Chemical resistant, Strong, Functional, UV resistant
Accuracy: ±0.3% (lower limit of ±0.4mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Heat resistant
  • Chemical resistant
  • Strong
  • Functional
  • UV resistant
  • ±0.3% (lower limit of ±0.4mm)
  • Standard
Carbon Fiber PETG show details

Carbon-reinforced PETG is stronger and stiffer than normal PETG.

Carbon Fiber PETG show details

Carbon-reinforced PETG is stronger and stiffer than normal PETG.

FDM 
Properties: Chemical resistant, Strong, Durable, Functional
Accuracy: ±0.4% (lower limit of ±0.4mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Chemical resistant
  • Strong
  • Durable
  • Functional
  • ±0.4% (lower limit of ±0.4mm)
  • Standard

PMMA's strength and toughness makes it great for functional parts and high-quality prototypes, while being relatively affordable.

PMMA's strength and toughness makes it great for functional parts and high-quality prototypes, while being relatively affordable.

Binder Jetting 
Properties: Functional, Durable, High detail, Strong, Visual
Accuracy: ±0.5% (lower limit of ±0.5mm)
Finishes: Raw
 
  • Functional
  • Durable
  • High detail
  • Strong
  • Visual
  • ±0.5% (lower limit of ±0.5mm)
  • Raw
Somos® Evolve show details

Somos Evolve is the perfect material for strong, highly detailed functional prototypes and parts that need to withstand continuous usage.

Somos® Evolve show details

Somos Evolve is the perfect material for strong, highly detailed functional prototypes and parts that need to withstand continuous usage.

SLA 
Properties: Strong, High detail, Functional, Durable, Visual
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard Smooth
+4
  • Strong
  • High detail
  • Functional
  • Durable
  • Visual
  • ±0.2% (lower limit of ±0.2mm)
  • Standard Smooth
Titanium show details

The strongest 3D printable material, titanium offers good dimensional accuracy and fine details.

Titanium show details

The strongest 3D printable material, titanium offers good dimensional accuracy and fine details.

DMLSSLMLMM 
Properties: Strong, Heat resistant, Chemical resistant, Functional
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Raw, Polished, Glassblasted, Deburred
 
  • Strong
  • Heat resistant
  • Chemical resistant
  • Functional
  • ±0.2% (lower limit of ±0.2mm)
  • Raw
  • Polished
  • Glassblasted
  • Deburred
Polypropylene show details

Polypropylene is a versatile and durable material, highly suitable for compliant and functional parts.

Polypropylene show details

Polypropylene is a versatile and durable material, highly suitable for compliant and functional parts.

SLSMJF 
Properties: Durable, Functional
Accuracy: ±0.3% (lower limit of ±0.3mm)
Finishes: Raw
 
  • Durable
  • Functional
  • ±0.3% (lower limit of ±0.3mm)
  • Raw
MJF Nylon PA11 show details

Multijet Fusion PA11, produced by HP, is a bio-derived powder with exceptionally high toughness. This material offers high ductility and impact strength for all applications, especially functional parts.

MJF Nylon PA11 show details

Multijet Fusion PA11, produced by HP, is a bio-derived powder with exceptionally high toughness. This material offers high ductility and impact strength for all applications, especially functional parts.

MJF 
Properties: Impact resistant, Durable, Biomedical, Functional, Visual
Accuracy: ±0.3% (lower limit of ±0.3mm)
Finishes: Raw, Polished
+10
  • Impact resistant
  • Durable
  • Biomedical
  • Functional
  • Visual
  • ±0.3% (lower limit of ±0.3mm)
  • Raw
  • Polished
GreenTec Pro show details

GreenTec Pro is a high performance biodegradable material made from 100% natural resources. With a high heat resistance(Upto 160°C) and mechanical stress resistance, the material is ideal for demanding applications.

GreenTec Pro show details

GreenTec Pro is a high performance biodegradable material made from 100% natural resources. With a high heat resistance(Upto 160°C) and mechanical stress resistance, the material is ideal for demanding applications.

FDM 
Properties: Heat resistant, Strong, Impact resistant, Functional
Accuracy: ±0.2% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Heat resistant
  • Strong
  • Impact resistant
  • Functional
  • ±0.2% (lower limit of ±0.2mm)
  • Standard
Glass-Filled Nylon show details

Glass-filled nylon is great for functional parts that require strength and rigidity.

Glass-Filled Nylon show details

Glass-filled nylon is great for functional parts that require strength and rigidity.

SLSMJF 
Properties: Strong, Heat resistant, Chemical resistant, Functional, Visual
Accuracy: ±0.3% (lower limit of ±0.3mm)
Finishes: Raw, Polished
+4
  • Strong
  • Heat resistant
  • Chemical resistant
  • Functional
  • Visual
  • ±0.3% (lower limit of ±0.3mm)
  • Raw
  • Polished
Carbon Fiber PLA show details

Carbon-reinforced PLA is stronger and stiffer than normal PLA.

Carbon Fiber PLA show details

Carbon-reinforced PLA is stronger and stiffer than normal PLA.

FDM 
Properties: Strong, Functional
Accuracy: ±0.3% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Strong
  • Functional
  • ±0.3% (lower limit of ±0.2mm)
  • Standard
Elastic Resin show details

This elastic resin with a Shore 50A-65A hardness is perfect for prototyping silicone-like parts.

Elastic Resin show details

This elastic resin with a Shore 50A-65A hardness is perfect for prototyping silicone-like parts.

SLADLPMSLALCD 
Properties: Flexible, Durable, Functional, Visual
Accuracy: ±0.4% (lower limit of ±0.4mm)
Finishes: Standard (Shore 50A-65A)
 
  • Flexible
  • Durable
  • Functional
  • Visual
  • ±0.4% (lower limit of ±0.4mm)
  • Standard (Shore 50A-65A)
LithaCon 3Y 210 ZrO2 show details

LithaCon contains zirconia stabilized with 3 mol% Yttria. Some of the mechanical highlights of these materials are their excellent flexural strength (> 1000 MPa), fracture toughness, resistance to abrasion, and thermal shock resistance.

LithaCon 3Y 210 ZrO2 show details

LithaCon contains zirconia stabilized with 3 mol% Yttria. Some of the mechanical highlights of these materials are their excellent flexural strength (> 1000 MPa), fracture toughness, resistance to abrasion, and thermal shock resistance.

LCM 
Properties: Chemical resistant, Strong, Biomedical, Functional, Smooth
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard Sintered
 
  • Chemical resistant
  • Strong
  • Biomedical
  • Functional
  • Smooth
  • ±0.2% (lower limit of ±0.2mm)
  • Standard Sintered
420/BR Steel show details

420/BR steel is a great material for low-cost metal parts of all sizes.

420/BR Steel show details

420/BR steel is a great material for low-cost metal parts of all sizes.

Binder Jetting 
Properties: Visual
Accuracy: ±5% (lower limit of ±0.5mm)
Finishes: Raw, Plated Raw, Polished, Plated Polished
+1
  • Visual
  • ±5% (lower limit of ±0.5mm)
  • Raw
  • Plated Raw
  • Polished
  • Plated Polished
Carbon Fiber ABS show details

CF-ABS is made using ABS and 15% high-modulus carbon fiber.

Carbon Fiber ABS show details

CF-ABS is made using ABS and 15% high-modulus carbon fiber.

FDM 
Properties: Functional, Strong
Accuracy: ±0.3% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Functional
  • Strong
  • ±0.3% (lower limit of ±0.2mm)
  • Standard
Wood-Filled PLA show details

Wood-filled PLA is the fusion of standard PLA and wood fiber used to create a wood-textured feel.

Wood-Filled PLA show details

Wood-filled PLA is the fusion of standard PLA and wood fiber used to create a wood-textured feel.

FDM 
Properties: Visual
Accuracy: ±0.3% (lower limit of ±0.3mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Natural, Sanded
+1
  • Visual
  • ±0.3% (lower limit of ±0.3mm)
  • Natural
  • Sanded
Somos® GP Plus 14122 show details

Somos GP Plus 14122 is ideal for functional prototypes, concept models, and low volume production parts.

Somos® GP Plus 14122 show details

Somos GP Plus 14122 is ideal for functional prototypes, concept models, and low volume production parts.

SLA 
Properties: Functional, High detail, Visual, Smooth
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard
 
  • Functional
  • High detail
  • Visual
  • Smooth
  • ±0.2% (lower limit of ±0.2mm)
  • Standard

HIPS is a material blend of polystyrene plastic and polybutadiene rubber. The mixture of these polymers results in a material that is both tough and resistant to impact.

HIPS is a material blend of polystyrene plastic and polybutadiene rubber. The mixture of these polymers results in a material that is both tough and resistant to impact.

FDM 
Properties: Impact resistant
Accuracy: ±0.3% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Impact resistant
  • ±0.3% (lower limit of ±0.2mm)
  • Standard
Flexible Resin show details

Ideal for SLA-printed rubber-like parts featuring a 80A Shore hardness similar to skateboard wheels.

Flexible Resin show details

Ideal for SLA-printed rubber-like parts featuring a 80A Shore hardness similar to skateboard wheels.

SLADLPMSLALCDPolyJet+1
Properties: Flexible, High detail, Visual, Smooth, Functional
Accuracy: ±0.3% (lower limit of ±0.3mm)
Finishes: Standard (Shore A80-A90)
+8
  • Flexible
  • High detail
  • Visual
  • Smooth
  • Functional
  • ±0.3% (lower limit of ±0.3mm)
  • Standard (Shore A80-A90)
LithaLox HP 500 Al2O3 show details

Lithalox HP 500 contains a high-purity (99.99%) aluminum oxide (alumina) material and is characterized by its high density, a favorable 4-point bending strength, and exceptionally smooth surface quality.

LithaLox HP 500 Al2O3 show details

Lithalox HP 500 contains a high-purity (99.99%) aluminum oxide (alumina) material and is characterized by its high density, a favorable 4-point bending strength, and exceptionally smooth surface quality.

LCM 
Properties: Heat resistant, Biomedical, Smooth, Functional
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard Sintered
 
  • Heat resistant
  • Biomedical
  • Smooth
  • Functional
  • ±0.2% (lower limit of ±0.2mm)
  • Standard Sintered

Brass is a versatile material that is great for jewelry prototypes and final parts.

Brass is a versatile material that is great for jewelry prototypes and final parts.

Lost Wax Casting 
Properties: Visual, High detail
Accuracy: ±5% (lower limit of ±0.35mm)
Finishes: Raw, Raw, PU coated, Polished
 
  • Visual
  • High detail
  • ±5% (lower limit of ±0.35mm)
  • Raw
  • Raw, PU coated
  • Polished
Carbon Fiber FDM Nylon show details

Carbon-fiber reinforced nylon is a strong and heat-resistant material, commonly used to print strong and functional parts.

Carbon Fiber FDM Nylon show details

Carbon-fiber reinforced nylon is a strong and heat-resistant material, commonly used to print strong and functional parts.

FDM 
Properties: Functional, Impact resistant, Chemical resistant
Accuracy: ±0.3% (lower limit of ±0.4mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Functional
  • Impact resistant
  • Chemical resistant
  • ±0.3% (lower limit of ±0.4mm)
  • Standard
BASF® Glass-Filled Polypropylene show details

Glass-filled polypropylene is a tough material with high strength that is also resistant to high temperatures. It is suitable for functional verification of product prototypes.

BASF® Glass-Filled Polypropylene show details

Glass-filled polypropylene is a tough material with high strength that is also resistant to high temperatures. It is suitable for functional verification of product prototypes.

SLS 
Properties: Chemical resistant, Functional, Heat resistant, Strong
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Raw
 
  • Chemical resistant
  • Functional
  • Heat resistant
  • Strong
  • ±0.2% (lower limit of ±0.2mm)
  • Raw
Plated Brass show details

Brass plated with a precious metal coating is perfect for jewelry pieces.

Plated Brass show details

Brass plated with a precious metal coating is perfect for jewelry pieces.

Lost Wax Casting 
Properties: High detail, Visual
Accuracy: ±5% (lower limit of ±0.35mm)
Finishes: Polished
 
  • High detail
  • Visual
  • ±5% (lower limit of ±0.35mm)
  • Polished

PEEK is a lightweight, industrial-grade thermoplastic polymer with high-temperature and pressure resistance.

PEEK is a lightweight, industrial-grade thermoplastic polymer with high-temperature and pressure resistance.

FDM 
Properties: Chemical resistant, Heat resistant, Functional, Strong, Impact resistant
Accuracy: ±0.3% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Chemical resistant
  • Heat resistant
  • Functional
  • Strong
  • Impact resistant
  • ±0.3% (lower limit of ±0.2mm)
  • Standard
Carbon Fiber PEEK show details

Carbon-reinforced PEEK is stronger and stiffer than normal PEEK.

Carbon Fiber PEEK show details

Carbon-reinforced PEEK is stronger and stiffer than normal PEEK.

FDM 
Properties: Chemical resistant, Functional, Heat resistant, Strong
Accuracy: ±0.3% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Chemical resistant
  • Functional
  • Heat resistant
  • Strong
  • ±0.3% (lower limit of ±0.2mm)
  • Standard
Castable Resin show details

Castable resin is suitable for jewelry and other metal casting.

Castable Resin show details

Castable resin is suitable for jewelry and other metal casting.

DLPSLAMSLALCD 
Properties: Visual, Smooth
Accuracy: ±0.4% (lower limit of ±0.4mm)
Finishes: Standard
 
  • Visual
  • Smooth
  • ±0.4% (lower limit of ±0.4mm)
  • Standard
Markforged® Onyx show details

Onyx is a carbon fiber reinforced nylon that is used to print strong prototypes or end-use parts.

Markforged® Onyx show details

Onyx is a carbon fiber reinforced nylon that is used to print strong prototypes or end-use parts.

FDM 
Properties: Chemical resistant, Strong, Durable, Functional
Accuracy: ±0.3% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Chemical resistant
  • Strong
  • Durable
  • Functional
  • ±0.3% (lower limit of ±0.2mm)
  • Standard
FDM Polypropylene show details

Polypropylene is a versatile and durable material, highly suitable for compliant and functional parts. The FDM technology provides a cheaper alternative to SLS or MJF printed parts.

FDM Polypropylene show details

Polypropylene is a versatile and durable material, highly suitable for compliant and functional parts. The FDM technology provides a cheaper alternative to SLS or MJF printed parts.

FDM 
Properties: Impact resistant, Durable, Functional
Accuracy: ±0.2% (lower limit of ±0.3mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Impact resistant
  • Durable
  • Functional
  • ±0.2% (lower limit of ±0.3mm)
  • Standard
Surgical Guide Resin show details

Formlabs's surgical guide resin is a CE certified, biocompatible material that meets Class I requirements.

Surgical Guide Resin show details

Formlabs's surgical guide resin is a CE certified, biocompatible material that meets Class I requirements.

SLA 
Properties: Biomedical, Smooth, Functional
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard
 
  • Biomedical
  • Smooth
  • Functional
  • ±0.2% (lower limit of ±0.2mm)
  • Standard
Ultrafuse 316L Steel show details

Sintered, FDM printed stainless steel is used for strong and functional parts.

Ultrafuse 316L Steel show details

Sintered, FDM printed stainless steel is used for strong and functional parts.

FDM 
Properties: Functional, Strong
Accuracy: Not available
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Sintered and Sandblasted
 
  • Functional
  • Strong
  • Not available
  • Sintered and Sandblasted
Carbon Fiber Polycarbonate show details

The addition of the carbon fibers to PC improves its strength, toughness, and temperature resistance.

Carbon Fiber Polycarbonate show details

The addition of the carbon fibers to PC improves its strength, toughness, and temperature resistance.

FDM 
Properties: Functional, Strong, UV resistant, Chemical resistant
Accuracy: ±0.3% (lower limit of ±0.3mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Functional
  • Strong
  • UV resistant
  • Chemical resistant
  • ±0.3% (lower limit of ±0.3mm)
  • Standard
Alumide show details

Alumide is made from nylon and aluminum powder, and it produces strong, high-temperature-resistant parts.

Alumide show details

Alumide is made from nylon and aluminum powder, and it produces strong, high-temperature-resistant parts.

SLS 
Properties: Durable, Heat resistant, Functional, Visual
Accuracy: ±0.3% (lower limit of ±0.3mm)
Finishes: Raw, Polished
 
  • Durable
  • Heat resistant
  • Functional
  • Visual
  • ±0.3% (lower limit of ±0.3mm)
  • Raw
  • Polished
17-4 PH Stainless Steel show details

17-4 PH SS is a martensite precipitation-hardened stainless steel with high strength and very good resistance to corrosion.

17-4 PH Stainless Steel show details

17-4 PH SS is a martensite precipitation-hardened stainless steel with high strength and very good resistance to corrosion.

SLMLMMDMP 
Properties: Impact resistant, Strong, Functional
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Sandblasted Matte
 
  • Impact resistant
  • Strong
  • Functional
  • ±0.2% (lower limit of ±0.2mm)
  • Sandblasted Matte
Rigid Resin show details

Rigid resin is a glass-reinforced photopolymer that offers a high level of detail, stiffness, and deformation resistance.

Rigid Resin show details

Rigid resin is a glass-reinforced photopolymer that offers a high level of detail, stiffness, and deformation resistance.

SLADLPcDLMLCDPolyJet+1
Properties: High detail, Strong, Functional, Smooth, Visual
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard
 
  • High detail
  • Strong
  • Functional
  • Smooth
  • Visual
  • ±0.2% (lower limit of ±0.2mm)
  • Standard

Gold is a precious metal commonly used for jewelry pieces and unique art designs.

Gold is a precious metal commonly used for jewelry pieces and unique art designs.

Lost Wax Casting 
Properties: Visual, High detail, Smooth
Accuracy: ±5% (lower limit of ±0.35mm)
Finishes: 14k gold, 14k Rose Gold, 14k White Gold, 18k Gold, 18k Rose Gold, 18k White Gold
 
  • Visual
  • High detail
  • Smooth
  • ±5% (lower limit of ±0.35mm)
  • 14k gold
  • 14k Rose Gold
  • 14k White Gold
  • 18k Gold
  • 18k Rose Gold
  • + 1 more

This classic precious metal is great for antique or modern jewelry and functional parts.

This classic precious metal is great for antique or modern jewelry and functional parts.

DMLSLost Wax Casting 
Properties: Visual, Functional
Accuracy: ±5% (lower limit of ±0.3mm)
Finishes: Raw, Raw, PU coated, Polished, Raw, Sintered
 
  • Visual
  • Functional
  • ±5% (lower limit of ±0.3mm)
  • Raw
  • Raw, PU coated
  • Polished
  • Raw, Sintered
Somos® Taurus show details

Somos Taurus has high thermal and mechanical properties along with superior strength, high accuracy, and exceptional surface finish.

Somos® Taurus show details

Somos Taurus has high thermal and mechanical properties along with superior strength, high accuracy, and exceptional surface finish.

SLA 
Properties: Heat resistant, High detail, Durable, Functional, Visual
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard Smooth
 
  • Heat resistant
  • High detail
  • Durable
  • Functional
  • Visual
  • ±0.2% (lower limit of ±0.2mm)
  • Standard Smooth
GreenTec Pro Carbon show details

GreenTEC Pro Carbon is a biopolymer made from renewable resources combined with 10% carbon fiber. The material offers high rigidity, very good mechanical properties and an increased temperature resistance.

GreenTec Pro Carbon show details

GreenTEC Pro Carbon is a biopolymer made from renewable resources combined with 10% carbon fiber. The material offers high rigidity, very good mechanical properties and an increased temperature resistance.

FDM 
Properties: Heat resistant, UV resistant, Functional, Strong, Impact resistant
Accuracy: ±0.2% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard matte
 
  • Heat resistant
  • UV resistant
  • Functional
  • Strong
  • Impact resistant
  • ±0.2% (lower limit of ±0.2mm)
  • Standard matte
LithaBone HA 400 show details

LithaBone HA 400 contains a ceramic material based on hydroxyapatite (HA). With a relative density of 85% and a corresponding porosity of 15%, it is perfect for bioresorbable applications. The HA powder is certified ASTM standard F1185-03.

LithaBone HA 400 show details

LithaBone HA 400 contains a ceramic material based on hydroxyapatite (HA). With a relative density of 85% and a corresponding porosity of 15%, it is perfect for bioresorbable applications. The HA powder is certified ASTM standard F1185-03.

LCM 
Properties: Functional, Biomedical, Smooth
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard Sintered
 
  • Functional
  • Biomedical
  • Smooth
  • ±0.2% (lower limit of ±0.2mm)
  • Standard Sintered
LithaBone TCP 300 show details

LithaBone TCP 300 contains a beta-tricalcium phosphate (ß-TCP) based ceramic which in the right setting, enables implants with defined pore geometries. The material can be resorbed by the body and replaced by new bone.

LithaBone TCP 300 show details

LithaBone TCP 300 contains a beta-tricalcium phosphate (ß-TCP) based ceramic which in the right setting, enables implants with defined pore geometries. The material can be resorbed by the body and replaced by new bone.

LCM 
Properties: Functional, Smooth, Biomedical, High detail
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard Sintered
 
  • Functional
  • Smooth
  • Biomedical
  • High detail
  • ±0.2% (lower limit of ±0.2mm)
  • Standard Sintered
BioMed Resin show details

BioMed resin is certified for short-term bodily contact and is typically used for medical device components.

BioMed Resin show details

BioMed resin is certified for short-term bodily contact and is typically used for medical device components.

SLADLPcDLMLCD 
Properties: Functional, Biomedical, High detail
Accuracy: ±0.4% (lower limit of ±0.4mm)
Finishes: Standard
 
  • Functional
  • Biomedical
  • High detail
  • ±0.4% (lower limit of ±0.4mm)
  • Standard
High-Temperature Resin show details

This material is great for heat-resistant mounts, fixtures, and housings, due to its high heat deflection.

High-Temperature Resin show details

This material is great for heat-resistant mounts, fixtures, and housings, due to its high heat deflection.

SLADLPMSLALCD 
Properties: Heat resistant, High detail, Durable, Visual, Functional
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard Smooth
+1
  • Heat resistant
  • High detail
  • Durable
  • Visual
  • Functional
  • ±0.2% (lower limit of ±0.2mm)
  • Standard Smooth
ABS Kevlar show details

ABS infused with short Kevlar fibres.

ABS Kevlar show details

ABS infused with short Kevlar fibres.

FDM 
Properties: Strong
Accuracy: ±0.3% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Strong
  • ±0.3% (lower limit of ±0.2mm)
  • Standard
Somos® PerFORM show details

Somos PerFORM is the material of choice for applications that require strong, stiff, temperature-resistant composite parts.

Somos® PerFORM show details

Somos PerFORM is the material of choice for applications that require strong, stiff, temperature-resistant composite parts.

SLA 
Properties: Functional, Heat resistant, Strong, High detail, Visual
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard Smooth
 
  • Functional
  • Heat resistant
  • Strong
  • High detail
  • Visual
  • ±0.2% (lower limit of ±0.2mm)
  • Standard Smooth
SLS Nylon PA6 show details

Nylon PA6 is a strong and heat-resistant material commonly used to print strong and functional parts.

SLS Nylon PA6 show details

Nylon PA6 is a strong and heat-resistant material commonly used to print strong and functional parts.

SLS 
Properties: Functional, Impact resistant, Durable, Heat resistant, Visual
Accuracy: ±0.3% (lower limit of ±0.3mm)
Finishes: Mineral Filled, Raw
 
  • Functional
  • Impact resistant
  • Durable
  • Heat resistant
  • Visual
  • ±0.3% (lower limit of ±0.3mm)
  • Mineral Filled
  • Raw
Accura® ClearVue show details

This high-clarity plastic has excellent humidity and moisture resistance and is ideal for a multitude of applications.

Accura® ClearVue show details

This high-clarity plastic has excellent humidity and moisture resistance and is ideal for a multitude of applications.

DLPSLAMSLALCD 
Properties: High detail, Transparent, Durable, Functional, Visual
Accuracy: ±0.2% (lower limit of ±0.1mm)
Finishes: Raw, Dyed
 
  • High detail
  • Transparent
  • Durable
  • Functional
  • Visual
  • ±0.2% (lower limit of ±0.1mm)
  • Raw
  • Dyed
Accura® Xtreme show details

This ultra-tough gray plastic offers outstanding durability, accuracy, and aesthetics.

Accura® Xtreme show details

This ultra-tough gray plastic offers outstanding durability, accuracy, and aesthetics.

SLA 
Properties: High detail, Durable, Functional, Visual, Strong
Accuracy: ±0.2% (lower limit of ±0.1mm)
Finishes: Raw
+4
  • High detail
  • Durable
  • Functional
  • Visual
  • Strong
  • ±0.2% (lower limit of ±0.1mm)
  • Raw
SLS Nylon PA11 show details

PA11 is a bio-based and temperature-stable material that features a high impact resistance and is commonly used to print strong and functional parts.

SLS Nylon PA11 show details

PA11 is a bio-based and temperature-stable material that features a high impact resistance and is commonly used to print strong and functional parts.

SLS 
Properties: Visual, Biomedical, Durable, Impact resistant, Functional
Accuracy: ±0.3% (lower limit of ±0.3mm)
Finishes: Raw, Polished
+9
  • Visual
  • Biomedical
  • Durable
  • Impact resistant
  • Functional
  • ±0.3% (lower limit of ±0.3mm)
  • Raw
  • Polished
SLS Nylon PA11 Carbon Fiber show details

Carbon-filled PA-11 Nylon is stiffer than regular nylon and is best used for applications where a high strength-to-weight ratio is needed.

SLS Nylon PA11 Carbon Fiber show details

Carbon-filled PA-11 Nylon is stiffer than regular nylon and is best used for applications where a high strength-to-weight ratio is needed.

SLS 
Properties: Impact resistant, Chemical resistant, Strong, Functional
Accuracy: ±0.3% (lower limit of ±0.3mm)
Finishes: Standard
 
  • Impact resistant
  • Chemical resistant
  • Strong
  • Functional
  • ±0.3% (lower limit of ±0.3mm)
  • Standard
ULTEM 9085 show details

ULTEM 9085 is a high-performance thermoplastic with excellent chemical resistance and an extreme level of flame retardancy.

ULTEM 9085 show details

ULTEM 9085 is a high-performance thermoplastic with excellent chemical resistance and an extreme level of flame retardancy.

FDM 
Properties: Heat resistant, Chemical resistant, Functional
Accuracy: ±0.3% (lower limit of ±0.3mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Heat resistant
  • Chemical resistant
  • Functional
  • ±0.3% (lower limit of ±0.3mm)
  • Standard
ULTEM 1010 show details

ULTEM 1010 offer the highest tensile strength and the highest chemical and thermal resistance of any FDM thermoplastic.

ULTEM 1010 show details

ULTEM 1010 offer the highest tensile strength and the highest chemical and thermal resistance of any FDM thermoplastic.

FDM 
Properties: Chemical resistant, Functional, Heat resistant
Accuracy: ±0.3% (lower limit of ±0.3mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Chemical resistant
  • Functional
  • Heat resistant
  • ±0.3% (lower limit of ±0.3mm)
  • Standard
Metal-Filled PLA show details

Metall-filled PLA is the fusion of standard PLA with metal powder used to provide a metal-textured feeling. Metal-filled PLA is popular with items that do not have functional capabilities, rather an aesthetic appearance.

Metal-Filled PLA show details

Metall-filled PLA is the fusion of standard PLA with metal powder used to provide a metal-textured feeling. Metal-filled PLA is popular with items that do not have functional capabilities, rather an aesthetic appearance.

FDM 
Properties: Visual
Accuracy: ±0.3% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: 40% Bronze-filled PLA, 80% Bronze-filled PLA, 80% Copper-filled PLA, 40% Iron-filled PLA
 
  • Visual
  • ±0.3% (lower limit of ±0.2mm)
  • 40% Bronze-filled PLA
  • 80% Bronze-filled PLA
  • 80% Copper-filled PLA
  • 40% Iron-filled PLA

PC-ABS combines the exceptional strength and heat resistance of PC with the flexibility of ABS.

PC-ABS combines the exceptional strength and heat resistance of PC with the flexibility of ABS.

FDM 
Properties: Strong, Heat resistant, Functional
Accuracy: ±0.4% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Strong
  • Heat resistant
  • Functional
  • ±0.4% (lower limit of ±0.2mm)
  • Standard
Maraging Steel show details

Featuring high strength and hardness, M300 maraging steel is best used for tooling applications.

Maraging Steel show details

Featuring high strength and hardness, M300 maraging steel is best used for tooling applications.

DMLSSLM 
Properties: Strong, Chemical resistant, Functional, Impact resistant
Accuracy: ±0.2% (lower limit of ±0.1mm)
Finishes: Sandblasted Matte
 
  • Strong
  • Chemical resistant
  • Functional
  • Impact resistant
  • ±0.2% (lower limit of ±0.1mm)
  • Sandblasted Matte
Durable Resin show details

Durable resin has high elongation and impact strength, which makes it ideal for pliable parts like living hinges.

Durable Resin show details

Durable resin has high elongation and impact strength, which makes it ideal for pliable parts like living hinges.

SLADLPMSLA 
Properties: Durable, Impact resistant, High detail, Functional, Visual
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard
 
  • Durable
  • Impact resistant
  • High detail
  • Functional
  • Visual
  • ±0.2% (lower limit of ±0.2mm)
  • Standard
iglidur® I150-PF show details

iglidur I150-PF by igus features a high abrasion resistance at low speeds combined with good mechanical properties.

iglidur® I150-PF show details

iglidur I150-PF by igus features a high abrasion resistance at low speeds combined with good mechanical properties.

FDM 
Properties: Durable
Accuracy: ±0.2% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Durable
  • ±0.2% (lower limit of ±0.2mm)
  • Standard
Castable Wax show details

Castable wax is an optimal material for jewelry and other metal casting.

Castable Wax show details

Castable wax is an optimal material for jewelry and other metal casting.

MJMMJP 
Properties: Visual, Smooth
Accuracy: ±0.4% (lower limit of ±0.4mm)
Finishes: Raw
 
  • Visual
  • Smooth
  • ±0.4% (lower limit of ±0.4mm)
  • Raw
Silicone Rubber show details

Elastic silicone rubber (AR-G1) allows for thin walls and fine details while still providing the resistance and flexibility of silicone.

Silicone Rubber show details

Elastic silicone rubber (AR-G1) allows for thin walls and fine details while still providing the resistance and flexibility of silicone.

Inkjet 
Properties: Functional, Durable, Flexible
Accuracy: ±0.2% (lower limit of ±0.05mm)
Finishes: AR-G1L (Shore A35), AR-G1H (Shore A65)
 
  • Functional
  • Durable
  • Flexible
  • ±0.2% (lower limit of ±0.05mm)
  • AR-G1L (Shore A35)
  • AR-G1H (Shore A65)

Copper is a precious metal with high electrical and thermal conductivity.

Copper is a precious metal with high electrical and thermal conductivity.

SLMLost Wax CastingADAM 
Properties: Visual, Heat resistant
Accuracy: ±5% (lower limit of ±0.2mm)
Finishes: Polished Uncoated, Sintered, ADAM
 
  • Visual
  • Heat resistant
  • ±5% (lower limit of ±0.2mm)
  • Polished Uncoated
  • Sintered
  • ADAM
Ultrafuse 17-4 PH Steel show details

Sintered, FDM printed stainless steel is used for strong and functional parts.

Ultrafuse 17-4 PH Steel show details

Sintered, FDM printed stainless steel is used for strong and functional parts.

FDM 
Properties: Functional, Chemical resistant, Strong, UV resistant, Heat resistant
Accuracy: Not available
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Sintered and Sandblasted
 
  • Functional
  • Chemical resistant
  • Strong
  • UV resistant
  • Heat resistant
  • Not available
  • Sintered and Sandblasted
Accura® 25 show details

This is a rigid plastic (Shore 80D) used to simulate and replace traditional CNC-machined polypropylene parts.

Accura® 25 show details

This is a rigid plastic (Shore 80D) used to simulate and replace traditional CNC-machined polypropylene parts.

DLPSLAMSLALCD 
Properties: Functional, Durable, Smooth, Visual
Accuracy: ±0.2% (lower limit of ±0.1mm)
Finishes: Standard Smooth
+4
  • Functional
  • Durable
  • Smooth
  • Visual
  • ±0.2% (lower limit of ±0.1mm)
  • Standard Smooth
PPSU/PPSF show details

PPSU is a heat- and chemical-resistant material suited for automotive, aerospace, and plumbing applications.

PPSU/PPSF show details

PPSU is a heat- and chemical-resistant material suited for automotive, aerospace, and plumbing applications.

FDM 
Properties: Functional, Heat resistant, Chemical resistant
Accuracy: ±0.3% (lower limit of ±0.3mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Functional
  • Heat resistant
  • Chemical resistant
  • ±0.3% (lower limit of ±0.3mm)
  • Standard
Markforged® H13 Tool Steel show details

Markforged H13 tool steel is an abrasion-resistant, hard material with a good resistance to heat.

Markforged® H13 Tool Steel show details

Markforged H13 tool steel is an abrasion-resistant, hard material with a good resistance to heat.

FDM 
Properties: Strong, Heat resistant, Functional
Accuracy: ±0.3% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Sintered
 
  • Strong
  • Heat resistant
  • Functional
  • ±0.3% (lower limit of ±0.2mm)
  • Sintered
Markforged® Inconel 625 show details

Markforged Inconel 625 is a nickel chromium-based superalloy that is extremely resistant to corrosion and strong at high temperatures.

Markforged® Inconel 625 show details

Markforged Inconel 625 is a nickel chromium-based superalloy that is extremely resistant to corrosion and strong at high temperatures.

FDM 
Properties: Heat resistant, Chemical resistant, Functional, Durable
Accuracy: ±0.3% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Sintered
 
  • Heat resistant
  • Chemical resistant
  • Functional
  • Durable
  • ±0.3% (lower limit of ±0.2mm)
  • Sintered
iglidur® I180-PF show details

iglidur I180-PF by igus is a material with high wear resistance, especially designed for moving parts.

iglidur® I180-PF show details

iglidur I180-PF by igus is a material with high wear resistance, especially designed for moving parts.

FDM 
Properties: Durable, Heat resistant
Accuracy: ±0.2% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Durable
  • Heat resistant
  • ±0.2% (lower limit of ±0.2mm)
  • Standard
Elastomeric Polyurethane show details

Elastomeric Polyurethane, or EPU, is a high-performance polyurethane elastomer. It exhibits excellent elastic behavior under cyclic tensile and compressive loads.

Elastomeric Polyurethane show details

Elastomeric Polyurethane, or EPU, is a high-performance polyurethane elastomer. It exhibits excellent elastic behavior under cyclic tensile and compressive loads.

DLS 
Properties: Functional, Flexible, Durable, Impact resistant, Smooth
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard Smooth
 
  • Functional
  • Flexible
  • Durable
  • Impact resistant
  • Smooth
  • ±0.2% (lower limit of ±0.2mm)
  • Standard Smooth
Rigid Polyurethane show details

Rigid Polyurethane is very stiff and strong with material properties that outperform ABS plastic and rivals Nylon. This material is perfect for mechanical parts that need to be tough, heat-resistant, and abrasion-resistant.

Rigid Polyurethane show details

Rigid Polyurethane is very stiff and strong with material properties that outperform ABS plastic and rivals Nylon. This material is perfect for mechanical parts that need to be tough, heat-resistant, and abrasion-resistant.

DLS 
Properties: Smooth, Strong, Functional
Accuracy: ±0.2% (lower limit of ±0.4mm)
Finishes: Standard Smooth
 
  • Smooth
  • Strong
  • Functional
  • ±0.2% (lower limit of ±0.4mm)
  • Standard Smooth
FDM TPU-ESD show details

FDM TPU-ESD is an engineering-grade thermoplastic chosen for its balance of flexibility and protection against electrostatic discharge.

FDM TPU-ESD show details

FDM TPU-ESD is an engineering-grade thermoplastic chosen for its balance of flexibility and protection against electrostatic discharge.

FDM 
Properties: Flexible, Impact resistant
Accuracy: ±0.4% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Flexible
  • Impact resistant
  • ±0.4% (lower limit of ±0.2mm)
  • Standard
Flame Retardant Polycarbonate show details

Flame Retardant PC has improved strength and thermal properties along with a flame retardant level of UL94: V-2. It is ideal for printing strong, functional parts that must withstand heat.

Flame Retardant Polycarbonate show details

Flame Retardant PC has improved strength and thermal properties along with a flame retardant level of UL94: V-2. It is ideal for printing strong, functional parts that must withstand heat.

FDM 
Properties: Heat resistant, Functional, Strong
Accuracy: ±0.3% (lower limit of ±0.3mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard
 
  • Heat resistant
  • Functional
  • Strong
  • ±0.3% (lower limit of ±0.3mm)
  • Standard
SLS Nylon PA11-ESD show details

SLS PA11 ESD is a bio-derived powder material with electrostatic discharging properties for increased process safety in advanced applications.

SLS Nylon PA11-ESD show details

SLS PA11 ESD is a bio-derived powder material with electrostatic discharging properties for increased process safety in advanced applications.

SLS 
Properties: Functional, Durable, Impact resistant, Visual
Accuracy: ±0.4% (lower limit of ±0.4mm)
Finishes: Standard
 
  • Functional
  • Durable
  • Impact resistant
  • Visual
  • ±0.4% (lower limit of ±0.4mm)
  • Standard
Nylon PA12 CCF show details

PA12 CCF is a is a co-extruded material consisting of nylon PA12 with a composite of nylon & continuous carbon fibers. This unique combination gives the finished part a smooth surface along with high strength, toughness, and durability.

Nylon PA12 CCF show details

PA12 CCF is a is a co-extruded material consisting of nylon PA12 with a composite of nylon & continuous carbon fibers. This unique combination gives the finished part a smooth surface along with high strength, toughness, and durability.

CFC 
Properties: Functional, Strong, Smooth, Durable
Accuracy: ±1.6% (lower limit of ±0.3mm)
Finishes: Standard smooth
 
  • Functional
  • Strong
  • Smooth
  • Durable
  • ±1.6% (lower limit of ±0.3mm)
  • Standard smooth
Nylon PA12 CBF show details

PA12 CBF is a co-extruded material consisting of nylon PA12 with a composite of nylon & continuous basalt fibers. This unique combination gives the finished part a smooth surface along with strength, toughness, and durability.

Nylon PA12 CBF show details

PA12 CBF is a co-extruded material consisting of nylon PA12 with a composite of nylon & continuous basalt fibers. This unique combination gives the finished part a smooth surface along with strength, toughness, and durability.

CFC 
Properties: Smooth, Functional, Durable, Strong
Accuracy: ±1.6% (lower limit of ±0.3mm)
Finishes: Standard smooth
 
  • Smooth
  • Functional
  • Durable
  • Strong
  • ±1.6% (lower limit of ±0.3mm)
  • Standard smooth
PETG CCF show details

PETG CCF is a co-extruded material consisting of Clear PETG with a composite of PETG & continuous carbon fibers. This unique combination results in a part with 20 times the tensile strength of PETG with a smooth translucent finish.

PETG CCF show details

PETG CCF is a co-extruded material consisting of Clear PETG with a composite of PETG & continuous carbon fibers. This unique combination results in a part with 20 times the tensile strength of PETG with a smooth translucent finish.

CFC 
Properties: Smooth, Functional, Strong, Impact resistant, Durable
Accuracy: ±1.6% (lower limit of ±0.3mm)
Finishes: Translucent smooth
 
  • Smooth
  • Functional
  • Strong
  • Impact resistant
  • Durable
  • ±1.6% (lower limit of ±0.3mm)
  • Translucent smooth
Color-Changing PLA show details

Temperature-based color-changing PLA is ideal for novelty prints.

Color-Changing PLA show details

Temperature-based color-changing PLA is ideal for novelty prints.

FDM 
Properties: Visual
Accuracy: ±0.3% (lower limit of ±0.2mm)
Infills: 20%, 40%, 60%, 80%, 100%
Finishes: Standard Black-yellow
 
  • Visual
  • ±0.3% (lower limit of ±0.2mm)
  • Standard Black-yellow
Multicolor show details

A great material for striking visual models produced in different materials.

Multicolor show details

A great material for striking visual models produced in different materials.

MJFPolyJet 
Properties: Visual
Accuracy: ±0.2% (lower limit of ±0.1mm)
Finishes: Multicolor+, HP® MJF Multicolor
 
  • Visual
  • ±0.2% (lower limit of ±0.1mm)
  • Multicolor+
  • HP® MJF Multicolor
EnvisionTEC E-Mould show details

E-Mould is a strong, high detail material, which can be used to print molds used for injection molding of various plastics.

EnvisionTEC E-Mould show details

E-Mould is a strong, high detail material, which can be used to print molds used for injection molding of various plastics.

cDLMDLP 
Properties: Smooth, Visual, Functional
Accuracy: ±0.2% (lower limit of ±0.2mm)
Finishes: Standard
 
  • Smooth
  • Visual
  • Functional
  • ±0.2% (lower limit of ±0.2mm)
  • Standard
CNC Plastic show details

CNC machining is available on-demand for a wide range of plastics for rapid prototyping and for the production of industrial grade parts.

CNC Plastic show details

CNC machining is available on-demand for a wide range of plastics for rapid prototyping and for the production of industrial grade parts.

CNC 
Properties: Smooth, Functional, Visual
Accuracy: Not available
Finishes:
 
  • Smooth
  • Functional
  • Visual
  • Not available
    CNC Metals show details

    CNC machining is available on-demand for a wide range of metals for rapid prototyping and for the production of industrial grade parts.

    CNC Metals show details

    CNC machining is available on-demand for a wide range of metals for rapid prototyping and for the production of industrial grade parts.

    CNC 
    Properties: Functional, Strong, Visual, Smooth
    Accuracy: Not available
    Finishes:
     
    • Functional
    • Strong
    • Visual
    • Smooth
    • Not available